Re: Sensibo and crestron stopped working
Thanks for the thoughts. ? Especially thank you to jbasen for your thoughts. ?
The strange thing is that I have updated nothing. ? I haven’t touched the code or firmware in the cp3 ( yes not a cp4). The certificate on the cp3 is self signed and has an expiry date of 2074. ?
I am wondering if the sensibo has updated its firmware automatically and has an issue with the self signed crestron certificate.?
I’m also trying to work out if the error message is a result of the sensibo not liking the certificate in the crestron cp3 or if it’s a result of the crestron cp3 not liking the certificate on the sensibo. ??
toggle quoted message
Show quoted text
On 26 Mar 2025, at 4:39?am, jbasen via groups.io <jay.m.basen@...> wrote:
?
Thanks for chiming in.? Good idea.
Jay
On 3/25/2025 7:49 AM, ckangis via groups.io wrote:
I'm well above my pay-grade here, so this is just a possible musing...
?
Did you upgrade to some of the most recent FW (I'm assuming this is a CP4)??
There's some issues with HomeKit, DSC, etc. that these newer FWs break related I think to certificate management.
I don't use these interfaces but I'm sure if I updated my CP4's it would break something that they haven't identified, and maybe this is your issue...
I've been staying on the "cp4_2.8003.00056.01.puf", as it seems to be *reasonably* stable...and you know what 'reasonably' means...:)
?
Just throwing this out as a possibility...
|
Re: Sensibo and crestron stopped working
Thanks for chiming in.? Good idea.
Jay
On 3/25/2025 7:49 AM, ckangis via
groups.io wrote:
toggle quoted message
Show quoted text
I'm well above my pay-grade here, so this is just a possible
musing...
?
Did you upgrade to some of the most recent FW (I'm assuming
this is a CP4)??
There's some issues with HomeKit, DSC, etc. that these newer
FWs break related I think to certificate management.
I don't use these interfaces but I'm sure if I updated my
CP4's it would break something that they haven't identified, and
maybe this is your issue...
I've been staying on the "cp4_2.8003.00056.01.puf", as it
seems to be *reasonably* stable...and you know what 'reasonably'
means...:)
?
Just throwing this out as a possibility...
|
thanks again for the suggestion @Gas Bandit.? Adding the analog inits helped out tremendously.
|
Alrighty then.? I have finally got the switch working a needed.? After figuring out the IPID issue, the processor now sees the switch as being online and all switching is working as needed.
?
Thanks again for all the help.
|
okay, I misunderstood how to set up the IPID.? I have sent the command ADDS IPID MASTER IPAddress.? then I'll check to see if the processor still sees the switch as being offline.
?
|
When I try to add the IPID to the IP Table, it wants to make the switch the Master and doesn't allow me to set it as a slave.? This is causing the processor to see the switch as being offline.
?
|
Dropping a "1" on save settings will have no appreciable effect.? ?What I'd do is put a real signal there, and either tie it to a button, or use Toolbox Debugger to pulse that signal high once you have the settings set how you want them.
|
Re: Sensibo and crestron stopped working
I'm well above my pay-grade here, so this is just a possible musing...
?
Did you upgrade to some of the most recent FW (I'm assuming this is a CP4)??
There's some issues with HomeKit, DSC, etc. that these newer FWs break related I think to certificate management.
I don't use these interfaces but I'm sure if I updated my CP4's it would break something that they haven't identified, and maybe this is your issue...
I've been staying on the "cp4_2.8003.00056.01.puf", as it seems to be *reasonably* stable...and you know what 'reasonably' means...:)
?
Just throwing this out as a possibility...
|
What do you have to configure via the front panel to make it work?
I've been away from this project for a while, spending time on the actual construction project.? It does work almost perfectly but been having one little glitch.? Upon power up, I have to configure it via front panel buttons then it responds correctly until there's a power outage or a reboot.? If I drop a "1" on "save settings", will that solve the issue?? The system will have a UPS along with a automatic standby generator.? That just leaves the occasional reboot to mess things up.
How do I post a picture here?? I don't see that option.? I'd post a picture of the entertainment center I built for him that will have everything in it to supply the two rooms connected to it.
|
Re: Sensibo and crestron stopped working
I'm glad you've found the Sensibo module helpful.? Unfortunately,
I don't know that I'm going to be helpful solving this problem.?
I'm just not well versed in certificates and how Crestron handles
them on a processor.?? I have a NAS drive where windows complains
about the drive's certificate and the manufacturer can't even give
me a straight answer on solving the problem.
My one thought would be to update the firmware on the processor
to see if that would update the certificate.? However, I believe
there are other people on the forum who know much more about this
topic than I do.
I wish I could be of more help
Jay
On 3/25/2025 12:40 AM, gbnet.hifi via
groups.io wrote:
toggle quoted message
Show quoted text
I am hoping that @jbasen will see this.?? I have been using
your sensibo module for a few years and it has been working
fantastically well.
?
Today the module has started erroring.?? Seems to be an SSL
issue.
?
The error is:
?
00:20:29.047: [Console Data] : Sensibo_Air - Refresh - Error
Sending Device Command:
Crestron.SimplSharp.Net.Https.HttpsException: Peer certificate
cannot be authenticated with given CA certificates
00:20:29.047: [Console Data] : ? ?at
Crestron.SimplSharp.Net.Https.HttpsClient.ProcessInternalError(HttpsClientResponse
response)
00:20:29.047: [Console Data] : ? ?at
Crestron.SimplSharp.Net.Https.HttpsClient.d(HttpsClientRequest
A_0, Boolean A_1)
00:20:29.047: [Console Data] : ? ?at
Crestron.SimplSharp.Net.Https.HttpsClient.TryDispatch(HttpsClientRequest
aRequest)
00:20:29.047: [Console Data] : ? ?at
Crestron.SimplSharp.Net.Https.HttpsClient.Dispatch(HttpsClientRequest
aRequest)
00:20:29.047: [Console Data] : ? ?at
Sensibo_Air_Integration.Sensibo_Air.Refresh()
00:20:29.047: [Console Data] : ? ?at
Sensibo_Air_Integration.Sensibo_Air.Initialize(String Device_ID,
String API_Key, Int16 Default_Target_Temperature, String
Default_Temperature_Unit, Int16 Debug)
00:20:29.047: [Console Data] : ? ?at
UserModule_SENSIBO_AIR_V1_6.UserModuleClass_SENSIBO_AIR_V1_6.INITIALIZE_OnPush_0(Object
__EventInfo__)
00:20:29.047: [Console Data] : ? ?at
Amib.Threading.Internal.WorkItem.o()
00:20:29.047: [Console Data] : ? ?at
Amib.Threading.Internal.WorkItem.Execute()
00:20:29.047: [Console Data] : ? ?at
Amib.Threading.SmartThreadPool.e(WorkItem A_0
?
Thanks
|
I've been away from this project for a while, spending time on the actual construction project.? It does work almost perfectly but been having one little glitch.? Upon power up, I have to configure it via front panel buttons then it responds correctly until there's a power outage or a reboot.? If I drop a "1" on "save settings", will that solve the issue?? The system will have a UPS along with a automatic standby generator.? That just leaves the occasional reboot to mess things up.
How do I post a picture here?? I don't see that option.? I'd post a picture of the entertainment center I built for him that will have everything in it to supply the two rooms connected to it.
|
Sensibo and crestron stopped working
I am hoping that @jbasen will see this.?? I have been using your sensibo module for a few years and it has been working fantastically well.
?
Today the module has started erroring.?? Seems to be an SSL issue.
?
The error is:
?
00:20:29.047: [Console Data] : Sensibo_Air - Refresh - Error Sending Device Command: Crestron.SimplSharp.Net.Https.HttpsException: Peer certificate cannot be authenticated with given CA certificates
00:20:29.047: [Console Data] : ? ?at Crestron.SimplSharp.Net.Https.HttpsClient.ProcessInternalError(HttpsClientResponse response)
00:20:29.047: [Console Data] : ? ?at Crestron.SimplSharp.Net.Https.HttpsClient.d(HttpsClientRequest A_0, Boolean A_1)
00:20:29.047: [Console Data] : ? ?at Crestron.SimplSharp.Net.Https.HttpsClient.TryDispatch(HttpsClientRequest aRequest)
00:20:29.047: [Console Data] : ? ?at Crestron.SimplSharp.Net.Https.HttpsClient.Dispatch(HttpsClientRequest aRequest)
00:20:29.047: [Console Data] : ? ?at Sensibo_Air_Integration.Sensibo_Air.Refresh()
00:20:29.047: [Console Data] : ? ?at Sensibo_Air_Integration.Sensibo_Air.Initialize(String Device_ID, String API_Key, Int16 Default_Target_Temperature, String Default_Temperature_Unit, Int16 Debug)
00:20:29.047: [Console Data] : ? ?at UserModule_SENSIBO_AIR_V1_6.UserModuleClass_SENSIBO_AIR_V1_6.INITIALIZE_OnPush_0(Object __EventInfo__)
00:20:29.047: [Console Data] : ? ?at Amib.Threading.Internal.WorkItem.o()
00:20:29.047: [Console Data] : ? ?at Amib.Threading.Internal.WorkItem.Execute()
00:20:29.047: [Console Data] : ? ?at Amib.Threading.SmartThreadPool.e(WorkItem A_0
?
Thanks
|
Yes, you'd take the VideoOut1_fb and put that to an Analog Equate to convert it back to a series of digitals you'd then put on the feedback joins of the buttons in question.
|
so then the PanelButton.1? through 4 would the same signal as on the TP module, right?? And I am already using the FB from the TP button presses.? Are you saying I would need to create a another analog init to push out different FB signals?
|
Just a heads up, "Save Settings" is a rising-edge-pulse activated control.? Putting a 1 there will make it save settings at program start, and then never again.
You can put a 1 in "Video Enter" but you need an analog signal in VideoOut1.? If you're controlling from a touchpanel, you'll need to use an Analog Initialize symbol to convert the digital button presses to setting 1d thru 8d of the Analog Signal going into VideoOut1.
?
Like this:
?
If you want it to autoswitch, I'd run the "Video_Detected_x_fb" feedback joins through logic wave pulses and then into another analog init that pushes to the same analog signal.
|
Re: CH and Caseta - Can I? How?
toggle quoted message
Show quoted text
If you have the Pro Caseta hub, it should work. I was able to make it work with Caseta shades, and the lights should work as well. Make sure the hub integration TELNET access is OFF or else it won't work.
|
Re: CH and Caseta - Can I? How?
If you have the Pro Caseta hub, it should work. I was able to make it work with Caseta shades, and the lights should work as well. Make sure the hub integration TELNET access is OFF or else it won't work.
|
CH and Caseta - Can I? How?
I am asked to do a small system with some caseta and some sonos, with iPad for UI. ?WooHoo! ?Can I get Caseta to load into Home like Homeworks or Ra, is there a trick to it?
?
TIA
|
I am having sort of a similar situation.? I have and HD-MD8x2 that I am trying to get to auto switch.? I have enter 1 onto the "VideoEnter" field, as well as onto "Save_Seetings" and "VideoOut1".? When I start my program it defaults to Input2 to Output1, since the touch panel is set to select Computer as its initial source.? It displays Input2 just fine, but when I select other inputs from the touch panel the switch stays at Input2.
|
Re: Amateur Question: duplicating IP-ID not working?
Check the GUI extenders in Simpl Windows, make sure that the program 2 versions have all of the same signals that program 1 version has. ?For that serial that shows an IP address, follow the signal back through the program (F2) and see what is supposed to be setting the value (also do same with the analog) as it seems that in program 2 there is a problem with those values being set properly.
toggle quoted message
Show quoted text
On Thu, Mar 20, 2025 at 05:54 PM, MSTC wrote:
I would double check to ensure that all of the feedback signals actually got duplicated, both on the app definition itself (the digital, analog, and serial joins) and on the GUI Extenders. ?I don't see any mention of it, so I will ask if the buttons actually work - e.g. can you adjust the volume and see the volume level change in debugger but it does not update on the app?
Hi MSTC,
?
Thanks for your time as always assisting! I spent some time navigating the debugger within Toolbox, cross comparing the original program (Program #1) and the program I recompiled using the .archive of the original program (Program #2). I've noticed that while the number of program symbols?matched in both - e.g 6000 symbols in the original and 6000 symbols in the recompiled one, when I take a look at certain sections of the symbols:
?
- Program #1 (original) has a Serial signal with an IP address that gets refreshed as it checks the information from multiple IP addresses from other devices. It also has an?Analog?signal that has a different state e.g 18d.
- Program #2 in the same sections would show?-empty- where there should be an IP address and for all (?) the analog signals, it shows the state as 0d.
In addition, while using the debugger on Program #2 (which was the program I simply retrieved, recompiled, and uploaded after correcting the GUI extenders/Syncing), clicking on the buttons on the iPad does indeed show up in the debugger - e.g. when I click on the different pages (video/audio) or if I select a source on my source list (if I select DTV 20) it'll show that I clicked on 20 in the debugger.
?
But the information doesn't update or gets sent. By default, it says DTV 9501 DTV 20, but it's supposed to grab the current playing channel and show Disney 123 DTV 20 automatically. The same for the volume controls, I can see the volume bar/% raise/lower on the iPad/debugger, but it doesn't have any effect on the actual system like Program #1 does. It's not pulling the current audio levels.
?
What's the best step from here? I know you noted "double check to ensure that all of the feedback signals actually got duplicated, both on the app definition itself (the digital, analog, and serial joins) and on the GUI Extenders". Would I check the symbols for Program #1 via the debugger and then compare it to Program #2's symbols via SIMPL Windows? How do you check the GUI Extenders?
?
This is a bit of a stretch, but I also noticed that I'm missing a single .RSD file, would that be a reason for these issues??
|
