Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
- Crestron
- Messages
Search
|
Re: New Series4 symbol in SIMPL
This happens sometimes when the device database is updated. It seems to be generally safe to do so. I did notice that on the most recent one, the update messed up (or disconnected) my signals that check the hostname at startup. So something on that device extender must have changed. It was an easy fix, and the only time I've ever had any issues with letting it update the device.
?
--
Josh Winn The LiquidPixel Group |
|
Re: 2n Crestron RAVA
Fantastic, thanks all. I'm keep to try this on site next week.
?
Although...
?
Would it be fair to say the name of this setting is misleading? Because of course I don't need to end group calls at first rejection, I need to silence all other potential receivers across both SIPs at first answer.
?
Many thanks |
|
Re: 2n Crestron RAVA
¿ªÔÆÌåÓýMh, just tested with the below mentioned setting activated, but doesn?t work. The other panels continue ringing. ? Cheers, Thorsten ? Von: [email protected] <[email protected]> Im Auftrag von Thorsten K?hler ? Yes, I?ve just integrated a 2N at my own house and the setting is under Calling => General Settings. Setting is ¡°Terminate Group Calls on First Rejected¡± ? Cheers, Thorsten ? Von: [email protected] <[email protected]> Im Auftrag von chad@... ? That looks right. Their firmware this year has moved a few things around but it's definitely that setting, on the 2n side, not a Crestron issue. |
|
Re: 2n Crestron RAVA
¿ªÔÆÌåÓýYes, I?ve just integrated a 2N at my own house and the setting is under Calling => General Settings. Setting is ¡°Terminate Group Calls on First Rejected¡± ? Cheers, Thorsten ? Von: [email protected] <[email protected]> Im Auftrag von chad@... ? That looks right. Their firmware this year has moved a few things around but it's definitely that setting, on the 2n side, not a Crestron issue. |
|
Re: Samsung Terrace HDBT input
¿ªÔÆÌåÓýThe place I put them already had HDBT set from previous TV, so I just used that. ?I don't know if I could have just used the TV as a receiver or not, but I do seem to recall that I could not implement control via IR/Serial. ?I suspect you could use IP control, and just send the HDMI if you have two CAT available at the TV.
|
|
Re: Novastar TU15Pro and VX Series
Which I just got the kick back so it wasnt correct. All I see is in the thread is r.karukunnath@...? the link wont complete the address. Not sure what I am doing wrong.? |
|
Re: Novastar TU15Pro and VX Series
toggle quoted message
Show quoted text
On Fri, 3 Jan 2025, 18:01 stevedearmore79 via , <stevedearmore79=[email protected]> wrote:
|
|
Re: Novastar TU15Pro and VX Series
Hi Steve, Please send to ady.putra@... Thank in advance On Fri, Jan 3, 2025, 22:01 stevedearmore79 via <stevedearmore79=[email protected]> wrote:
|
|
Re: 2n Crestron RAVA
I¡¯m not in front an a 2N so I can¡¯t remember the settings page this is in, I think it under general settings, but you need to enable this.?
?
End Group Calls at First Rejection ¨C enable the device to end all outgoing group calls if any of the called destinations rejects the call. |
|
Crestron Home Extension driver
Hi all,
?
I am trying to compile the sample 'ExtensionDriver' from the latest SDK resources, and after resolving all missing dependencies and outdated framework issues, it is building without any major problems.?
However, the PKG file is not generated due to this error during startup:? "Null Exception: Reference to a string is not set to an instance of a String."
?
I am stuck without any clue.?
|
|
New Series4 symbol in SIMPL
¿ªÔÆÌåÓýHi, I noticed a new device symbol for 4-series processors was introduced into SIMPL. When I load an older program, SIMPL asks me to replace with the new one. Is that a good idea? Did anybody experience any issues? ? Thanks, Thorsten |
|
Topics in Home Automation - New Article in Residential Tech Today
Most articles on smart home technology, including many I've written, focus on smart home technology for a suburban home.? My latest article, "How to Maximize Small Spaces With Smart Furnishings", looks at how smart home technology, including robotic furnishing, can optimize living in small spaces.? Beyond that, the information in the article is applicable in other living situations.? For example, creating a room that converts between a home office and guest bedroom.
You can find the article here: For those interested in earlier articles that I've written, you can find those here: For these interested in even earlier content that I wrote, you can find it all here though older content has formatting issues due to a transfer from blogspot to wordpress. Thanks |
|
Re: Novastar H series
Your email link wasn't complete so I couldn't send you the .pdf I have. This is the only info I see in the manual for input selection.
?
?
4.3.1 Switching Input Source of Layer
(2) Command to switch input source of layer Switch the input source of layer to CardNo: 55 aa 00 00 fe 00 00 00 00 00 01 00 Addr0 Addr1 Addr2 Addr3 03 00 CardNo 00 00 SUM_L SUM_H The command data is in hexadecimal format. The parameter descriptions are as follows. a. CardNo stands for the slot number (refer to Appendix 3). For example, CardNo of HDMI 2.0 is 0x00. b. SUM_L and SUM_H constitute the checksum of this command frame, which is the sum of the underlined data and 0x5555. The calculation formula is as below. SUM = 0x00 + 0x00 + 0xfe + 0x00 + 0x00 + 0x00 + 0x00 + 0x00 + 0x01 + 0x00 + Addr0 + Addr1 + Addr2 + Addr3 + 0x03 + 0x00 + CardNo + Priority + Source + 0x5555, SUM = SUM_H<<8 + SUM_L (SUM_L stands for the lower 8 bits of SUM, while SUM_H stands for the higher 8 bits of SUM). c. Addr: Addr stands for the layer parameter address (Addr = Addr3<<24 + Addr2<<16 + Addr1<<8 + Addr0). Different layers have different parameter addresses. The calculation formula for Addr is Addr = 0x13020012 + WindowNo * 0x30. For example, if you want to adjust the parameters of MAIN layer, then Addr = 0x13020012 + 0 * 0x30 = 0x13020012, that is, Addr0 = 0x12, Addr1 = 0x00, Addr2 = 0x02, Addr3 = 0x13. d. Addr: Addr stands for the layer parameter address (Addr = Addr3<<24 + Addr2<<16 + Addr1<<8 + Addr0). Different layers have different parameter addresses. The calculation formula for Addr is Addr = 0x13020012 + WindowNo * 0x30. For example, if you want to adjust the parameters of PIP1 layer, then Addr = 0x13020012 + 1 * 0x30 = 0x13020042 = Addr3<<24 + Addr2<<16 + Addr1<<8 + Addr0 = 0x13<<24 + 0x02<<16 + 0x00<<8 + 0x42, that is, Addr0 = 0x42, Addr1 = 0x00, Addr2 = 0x02, Addr3 = 0x13. e. Addr: Addr stands for the layer parameter address (Addr = Addr3<<24 + Addr2<<16 + Addr1<<8 + Addr0). Different layers have different parameter addresses. The calculation formula for Addr is Addr = 0x13020012 + WindowNo * 0x30. For example, if you want to adjust the parameters of PIP2 layer, then Addr = 0x13020012 + 2 * 0x30 = 0x13020072 = Addr3<<24 + Addr2<<16 + Addr1<<8 + Addr0 = 0x13<<24 + 0x02<<16 + 0x00<<8 + 0x72, that is, Addr0 = 0x72, Addr1 = 0x00, Addr2 = 0x02, Addr3 = 0x13. ?
(2) Response packet
If the response packet is in the following format, the layer parameters are set successfully. aa 55 00 00 00 fe 00 00 00 00 01 00 Addr0 Addr1 Addr2 Addr3 00 00 SUM_L SUM_H ¡°SUM_L¡± and ¡°SUM_H¡± constitute the checksum of this command frame, which is the sum of the underlined data and 0x5555. The calculation formula is as below. SUM = 0x00 + 0x00 + 0x00 + 0xfe + 0x00 + 0x00 + 0x00 + 0x00 + 0x01 + 0x00 + Addr0 + Addr1 + Addr2 + Addr3 + 0x00 + 0x00 + 0x5555, SUM = SUM_H<<8 + SUM_L (SUM_L stands for the lower 8 bits of SUM, while SUM_H stands for the higher 8 bits of SUM). |
josh@LiquidPixel
to navigate to use esc to dismiss