Keyboard Shortcuts
Likes
- Crestron
- Messages
Search
|
DGE2 Audio Question
¿ªÔÆÌåÓýI¡¯m using/have repurposed a DGE2 in a way it was very much not meant to be used and part of that is using it to embed analog audio (from a Biamp, wired as balanced mono) into the resulting HDMI output. ? About every 7 to 10 seconds there¡¯s a very quick blip/tick/click of static that¡¯s not exactly the same each time. I¡¯m feeding the same audio signal (using different outputs from the Tesira) to SDI audio embedders as well as a monitor speaker and none of those exhibit the same artifact. Have tried swapping the outputs around and the problem stays with the DGE2. ? I know it¡¯s a long dead product (and if it weren¡¯t for the need to get analog audio in I probably would have stuck one of the DGE-X00s that the client has on the shelf instead (still may do that but then I have to add external HDMI audio embed, which I don¡¯t have on the shelf) ? -- Lincoln King-Cliby Commercial Market Director ? |
|
Re: Hue Tap Dial
¿ªÔÆÌåÓýHi Thorsten, I haven't used a Hue Tap Dial.? But, since the device is compatible with Home Assistant, you can leverage an HA green as a gateway for Crestron integration using the technique I outlined in my HA-Crestron integration article. Hope this helps Jay On 1/5/2025 2:03 PM, Thorsten K?hler
via groups.io wrote:
|
|
Hue Tap Dial
¿ªÔÆÌåÓýHi, ? is it possible to use the Hue Tap Dial within Crestron? Any experience? ? Thanks, Thorsten |
|
Re: New Series4 symbol in SIMPL
I had no issues with my RMC4s, but on my CP4N there were issues. In the program, I have an MD32x32 switcher. Some of the devices in the card slots were deleted from the program while the ones that weren't got shifted up so they now started with slot 1. It was very strange and I had to rebuild almost the entire I/O programming. |
|
Re: New Series4 symbol in SIMPL
This happens sometimes when the device database is updated. It seems to be generally safe to do so. I did notice that on the most recent one, the update messed up (or disconnected) my signals that check the hostname at startup. So something on that device extender must have changed. It was an easy fix, and the only time I've ever had any issues with letting it update the device.
?
--
Josh Winn The LiquidPixel Group |
|
Re: 2n Crestron RAVA
Fantastic, thanks all. I'm keep to try this on site next week.
?
Although...
?
Would it be fair to say the name of this setting is misleading? Because of course I don't need to end group calls at first rejection, I need to silence all other potential receivers across both SIPs at first answer.
?
Many thanks |
|
Re: 2n Crestron RAVA
¿ªÔÆÌåÓýMh, just tested with the below mentioned setting activated, but doesn?t work. The other panels continue ringing. ? Cheers, Thorsten ? Von: [email protected] <[email protected]> Im Auftrag von Thorsten K?hler ? Yes, I?ve just integrated a 2N at my own house and the setting is under Calling => General Settings. Setting is ¡°Terminate Group Calls on First Rejected¡± ? Cheers, Thorsten ? Von: [email protected] <[email protected]> Im Auftrag von chad@... ? That looks right. Their firmware this year has moved a few things around but it's definitely that setting, on the 2n side, not a Crestron issue. |
|
Re: 2n Crestron RAVA
¿ªÔÆÌåÓýYes, I?ve just integrated a 2N at my own house and the setting is under Calling => General Settings. Setting is ¡°Terminate Group Calls on First Rejected¡± ? Cheers, Thorsten ? Von: [email protected] <[email protected]> Im Auftrag von chad@... ? That looks right. Their firmware this year has moved a few things around but it's definitely that setting, on the 2n side, not a Crestron issue. |
|
Re: Samsung Terrace HDBT input
¿ªÔÆÌåÓýThe place I put them already had HDBT set from previous TV, so I just used that. ?I don't know if I could have just used the TV as a receiver or not, but I do seem to recall that I could not implement control via IR/Serial. ?I suspect you could use IP control, and just send the HDMI if you have two CAT available at the TV.
|
|
Re: Novastar TU15Pro and VX Series
Which I just got the kick back so it wasnt correct. All I see is in the thread is r.karukunnath@...? the link wont complete the address. Not sure what I am doing wrong.? |
|
Re: Novastar TU15Pro and VX Series
toggle quoted message
Show quoted text
On Fri, 3 Jan 2025, 18:01 stevedearmore79 via , <stevedearmore79=[email protected]> wrote:
|
|
Re: Novastar TU15Pro and VX Series
Hi Steve, Please send to ady.putra@... Thank in advance On Fri, Jan 3, 2025, 22:01 stevedearmore79 via <stevedearmore79=[email protected]> wrote:
|
josh@LiquidPixel