Re: MidAtlantic RackLink Issue
Reach out to MA support, they have new firmware for this
|
Re: MidAtlantic RackLink Issue
Hi Thomas,
*** In your post, you call out the "PDX-215c" model vs the?RLNK-215...
The PDX does not even have an ethernet port on it so I'm hoping that you miss-typed...
Assuming that you're controlling a controllable unit (RLNK models):
First, feel free to reach out to me directly if you want to chat about the specifics of your install...
Second, as mentioned I have used this module successfully with the RLNK-915R units, but have not used it with the?RLNK-215, though it should be the same.
I worked with MAP over the last couple years to sort out IP/Firmware issues with the initial (v01.02) and and interim (v01.10) versions. both had issues with DHCP and Static addressing schemes after a hard boot.
The current firmware version (v1.14.02 Release) has been solid. This would be the first place I would start, by verifying that you're running this version.
NOTE: the upgrade process will be messy regarding the IP address, so you will want to be on-site and be able to do IP scans to find the unit, etc...
HTH
|
Re: MidAtlantic RackLink Issue
Hi Thomas,
I'm late for a meeting right now, but will chime in later. I've integrated with the 915R models very successfully over the last few years, and have good contacts inside MAP.
Standby...
|
Re: KNX alternatives to the CGEIB-IP?
On Fri, Sep 22, 2023 at 11:48 PM, Devin Cook wrote:
It appears that the?CGEIB-IP is limited to something like 500 addresses, which may be why it has proven to be unstable for us.? The system we are connected to needs closer to 2000.
About 10 years ago I wrote code around a KNX Gateway, but I assume that device is no longer in production, though I would have to dig through very old docs to even figure out what the device was.?
Are there alternatives I should be looking at?
By the way, we still have one new CGEIB-IP in stock for a possible replacement for old objects. If necessary, we can sell it.
|
Re: KNX alternatives to the CGEIB-IP?
Hi!
We use Weinzierl BAOS774 (1000 KNX data points) for Crestron-KNX Integrations.?
You can write a module for this gateway yourself or use our commercial module.
|
Re: MidAtlantic RackLink Issue
Mr. Thomas, ? Sorry to learn of your trials and tribulations.? I have no personal experience with Middle Atlantic’s IP controlled power products and therefore cannot offer And meaningful observations or solutions.? ? That said, I am quite familiar with SnapAV’s product line and they work exceedingly well. ?As a matter of record, I received an email this very morning about A client’s hacienda going offline.? We had continuous rain and lightning storms over the weekend.? As a possible alternative, Crestron now offers these very Same appliances in their product assortment.? I have no experience with their version either/yet. ? Feel free to contact me, personally if I can offer any other insights…. ? U. of F. Alumnus 1972 ? Best regards, ? Michael? S. Moran ? 
? ?? Office:?? 561.391.1843 ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Thomas Herb
Sent: Monday, September 25, 2023 1:23 PM
To: [email protected]
Subject: [crestron] MidAtlantic RackLink Issue? Hi, ? I have a ? to control power. ? I am using to control it. ? Running on a CP3. ? Works fine for a while then the unit stops responding. Won’t turn outlet on after some period of rest. ? The modules continues to send the command but there is no reply from the device. ? The TCP/IP client “Connect” input is high. The TCP/IP client “status” is 1 (waiting). The TCP/IP client “Connect-F” is low. Of course. ? IP table TCP/IP client says “waiting”. ? The PDX-215c unit can ping the processor and the processor can ping it, they are both online and can see each other. ? Anyone have a suggestion? ? Anyone else use these things and have working code? ? Especially for a 4 series since the current module is 2 or 3 series only? ? Have a Great Day, ? ? Thomas (Trey) Herb M.A. Ed., CTS A/V Systems Manager Warrington College of Business
University of Florida Bryan 232D (m) 352-294-2199 ? ? ?
|
MidAtlantic RackLink Issue
Hi,
?
I have a ? to control power.
?
I am using to control it.
?
Running on a CP3.
?
Works fine for a while then the unit stops responding. Won’t turn outlet on after some period of rest.
?
The modules continues to send the command but there is no reply from the device.
?
The TCP/IP client “Connect” input is high.
The TCP/IP client “status” is 1 (waiting).
The TCP/IP client “Connect-F” is low. Of course.
?
IP table TCP/IP client says “waiting”.
?
The PDX-215c unit can ping the processor and the processor can ping it, they are both online and can see each other.
?
Anyone have a suggestion?
?
Anyone else use these things and have working code?
?
Especially for a 4 series since the current module is 2 or 3 series only?
?
Have a Great Day,
?
?
Thomas (Trey) Herb M.A. Ed., CTS
A/V Systems Manager
Warrington College of Business
University of Florida
Bryan 232D
(m) 352-294-2199
?
?
?
|
Re: Has anybody used Webhook Relay with IFTTT with a double NAT ISP?
Thanks for the advice. It was much easier than I thought it would be. I do tend to overcomplicate things, so it's nice to know there's a simple solution out there?
|
Re: SPDIF over ethernet/cat5
Muxlab 500086 has worked well for me on a number of projects. Does Toslink also and can convert between them. Power on either end.?
|
Re: Switchbot Meter / Meter Plus
That seems to work.? Thanks so much!
|
Re: Switchbot Meter / Meter Plus
I believe this will work for you
Thanks
Jay
On 9/24/2023 4:20 PM, Jay R. wrote:
toggle quoted message
Show quoted text
No rush at all. You do so much for the community
and I for one really appreciate it.?
Sigh.? I'm going to have to pull out one and do some
debugging.? I may be able to get to it this evening.?
Otherwise, given my schedule that might take a day or 2
On 9/24/2023 3:25 PM, Jay R. wrote:
Thanks Jay, this definitely
improved the connection, but the devices look to report
good data but the temp outputs as 320 and 0 for
humidity.
SwitchBot - Get_Meter_State - URL:
SwitchBot - Security_Test - time = 1695589196192
SwitchBot - Security_Test - nonce =
820aa91f-4acb-4873-adec-8545f0e3a9d5
SwitchBot - Security_Test - signature =
+bkZ15IxdhCsSVpAkn37t5wEHhUW8aV6LFweoLFPv0c=
SwitchBot - Get_Meter_State - Success -
response.ContentString =
{"statusCode":100,"body":{"deviceId":"ED6743015676","deviceType":"Meter","hubDeviceId":"CC34350F1FD7","humidity":33,"temperature":26.7,"version":"V2.8","battery":100},"message":"success"}
SwitchBot - Get_Meter_State - Temperature = 320,
Humidity = 0
The meters and Indoor/Outdoor Hygrometers
(deviceType":"WoIOSensor) and Hub2 all seem to report
back accurately it just doesn't output to the analog
signal correctly.
I really appreciate your help.
|
Re: Switchbot Meter / Meter Plus
No rush at all. You do so much for the community and I for one really appreciate it.?
Sigh.? I'm going to have to pull out one and do some debugging.?
I may be able to get to it this evening.? Otherwise, given my
schedule that might take a day or 2
On 9/24/2023 3:25 PM, Jay R. wrote:
Thanks Jay, this definitely improved the connection, but the
devices look to report good data but the temp outputs as 320 and 0
for humidity.
SwitchBot - Get_Meter_State - URL:
SwitchBot - Security_Test - time = 1695589196192
SwitchBot - Security_Test - nonce =
820aa91f-4acb-4873-adec-8545f0e3a9d5
SwitchBot - Security_Test - signature =
+bkZ15IxdhCsSVpAkn37t5wEHhUW8aV6LFweoLFPv0c=
SwitchBot - Get_Meter_State - Success - response.ContentString =
{"statusCode":100,"body":{"deviceId":"ED6743015676","deviceType":"Meter","hubDeviceId":"CC34350F1FD7","humidity":33,"temperature":26.7,"version":"V2.8","battery":100},"message":"success"}
SwitchBot - Get_Meter_State - Temperature = 320, Humidity
= 0
The meters and Indoor/Outdoor Hygrometers
(deviceType":"WoIOSensor) and Hub2 all seem to report back
accurately it just doesn't output to the analog signal correctly.
I really appreciate your help.
|
Re: Switchbot Meter / Meter Plus
Sigh.? I'm going to have to pull out one and do some debugging.?
I may be able to get to it this evening.? Otherwise, given my
schedule that might take a day or 2
On 9/24/2023 3:25 PM, Jay R. wrote:
toggle quoted message
Show quoted text
Thanks Jay, this definitely improved the connection, but the
devices look to report good data but the temp outputs as 320 and 0
for humidity.
SwitchBot - Get_Meter_State - URL:
SwitchBot - Security_Test - time = 1695589196192
SwitchBot - Security_Test - nonce =
820aa91f-4acb-4873-adec-8545f0e3a9d5
SwitchBot - Security_Test - signature =
+bkZ15IxdhCsSVpAkn37t5wEHhUW8aV6LFweoLFPv0c=
SwitchBot - Get_Meter_State - Success - response.ContentString =
{"statusCode":100,"body":{"deviceId":"ED6743015676","deviceType":"Meter","hubDeviceId":"CC34350F1FD7","humidity":33,"temperature":26.7,"version":"V2.8","battery":100},"message":"success"}
SwitchBot - Get_Meter_State - Temperature = 320, Humidity
= 0
The meters and Indoor/Outdoor Hygrometers
(deviceType":"WoIOSensor) and Hub2 all seem to report back
accurately it just doesn't output to the analog signal correctly.
I really appreciate your help.
|
Re: Switchbot Meter / Meter Plus
Thanks Jay, this definitely improved the connection, but the devices look to report good data but the temp outputs as 320 and 0 for humidity.
SwitchBot - Get_Meter_State - URL: https://api.switch-bot.com/v1.1/devices/ED6743015676/status
SwitchBot - Security_Test - time = 1695589196192
SwitchBot - Security_Test - nonce = 820aa91f-4acb-4873-adec-8545f0e3a9d5
SwitchBot - Security_Test - signature = +bkZ15IxdhCsSVpAkn37t5wEHhUW8aV6LFweoLFPv0c=
SwitchBot - Get_Meter_State - Success - response.ContentString = {"statusCode":100,"body":{"deviceId":"ED6743015676","deviceType":"Meter","hubDeviceId":"CC34350F1FD7","humidity":33,"temperature":26.7,"version":"V2.8","battery":100},"message":"success"}
SwitchBot - Get_Meter_State - Temperature = 320, Humidity = 0
The meters and Indoor/Outdoor Hygrometers (deviceType":"WoIOSensor) and Hub2 all seem to report back accurately it just doesn't output to the analog signal correctly.
I really appreciate your help.
|
Re: Switchbot Meter / Meter Plus
Hi Jay,
I think this will work but I don't have a SwitchBot Meter setup
right now to test it myself.? Just replace the SwitchBot.clz file
you have with this one, recompile, and let me know if it addresses
the issue.
Here is a download link -
Thanks
Jay
On 9/24/2023 2:08 PM, jbasen via
groups.io wrote:
toggle quoted message
Show quoted text
Hi Jay,
It's not you it's me.? SwitchBot made a change to their JSON
and it broke my parsing.? I'll get an update out as soon as I
can.
Thanks
Jay?
On 9/24/2023 9:14 AM, Jay R. wrote:
[Edited Message Follows]
I'm sure I'm doing something wrong but I haven't figured out
what.? I recently bought a switchbot and some meters to test out
and see if I wanted to try the CurtainBots or BlindTilts.? I
seem to be connecting to the switchbots and getting a response
but then I get a format exception, I only have meters/meter plus
to test with right now.?
Here is the snippet from the console.
DIN-AP3MEX>SwitchBot - Get_Meter_State - URL:
SwitchBot - Security_Test - time = 1695567395089
SwitchBot - Security_Test - nonce =
8eb6bd54-761b-472e-ab56-88389300d959
SwitchBot - Security_Test - signature =
PDUPG1DUOVcjMedvxMjFK/Nb4NGk3qSk9NnVRSptjh0=
SwitchBot - Get_Meter_State - Success - response.ContentString =
{"statusCode":100,"body":{"deviceId":"XXXXXXXX5676","deviceType":"Meter","hubDeviceId":"XXXXXXXX1FD7","humidity":30,"temperature":26.9,"version":"V2.8","battery":100},"message":"success"}
SwitchBot - Get_Meter_State - Error Retreiving Meter
StatusSystem.FormatException: FormatException
?? at System.Double.Parse(String s, NumberStyles style,
IFormatProvider provider)
?? at SwitchBot_Integration.SwitchBot.Get_Meter_State(String
Device_ID, Int16 Temperature_Format_Selection)
?? at
UserModule_SWITCHBOT_METER_V1.UserModuleClass_SWITCHBOT_METER_V1.POLL_OnPush_1(Object
__EventInfo__)
?? at Amib.Threading.Internal.WorkItem.o()
?? at Amib.Threading.Internal.WorkItem.Execute()
?? at Amib.Threading.SmartThreadPool.e(WorkItem A_0)
?? at Amib.Threading.SmartThreadPool.p()
Thanks
|
Re: Switchbot Meter / Meter Plus
Hi Jay,
It's not you it's me.? SwitchBot made a change to their JSON and
it broke my parsing.? I'll get an update out as soon as I can.
Thanks
Jay?
On 9/24/2023 9:14 AM, Jay R. wrote:
toggle quoted message
Show quoted text
[Edited Message Follows]
I'm sure I'm doing something wrong but I haven't figured out
what.? I recently bought a switchbot and some meters to test out
and see if I wanted to try the CurtainBots or BlindTilts.? I seem
to be connecting to the switchbots and getting a response but then
I get a format exception, I only have meters/meter plus to test
with right now.?
Here is the snippet from the console.
DIN-AP3MEX>SwitchBot - Get_Meter_State - URL:
SwitchBot - Security_Test - time = 1695567395089
SwitchBot - Security_Test - nonce =
8eb6bd54-761b-472e-ab56-88389300d959
SwitchBot - Security_Test - signature =
PDUPG1DUOVcjMedvxMjFK/Nb4NGk3qSk9NnVRSptjh0=
SwitchBot - Get_Meter_State - Success - response.ContentString =
{"statusCode":100,"body":{"deviceId":"XXXXXXXX5676","deviceType":"Meter","hubDeviceId":"XXXXXXXX1FD7","humidity":30,"temperature":26.9,"version":"V2.8","battery":100},"message":"success"}
SwitchBot - Get_Meter_State - Error Retreiving Meter
StatusSystem.FormatException: FormatException
?? at System.Double.Parse(String s, NumberStyles style,
IFormatProvider provider)
?? at SwitchBot_Integration.SwitchBot.Get_Meter_State(String
Device_ID, Int16 Temperature_Format_Selection)
?? at
UserModule_SWITCHBOT_METER_V1.UserModuleClass_SWITCHBOT_METER_V1.POLL_OnPush_1(Object
__EventInfo__)
?? at Amib.Threading.Internal.WorkItem.o()
?? at Amib.Threading.Internal.WorkItem.Execute()
?? at Amib.Threading.SmartThreadPool.e(WorkItem A_0)
?? at Amib.Threading.SmartThreadPool.p()
Thanks
|
Hi,
Just looking for a rock solid SDPIF extender over ethernet/UTP with loseless sound quality.
Are there any recommendations from you guys?
Regards
Kamil Rukat
|
Switchbot Meter / Meter Plus
I'm sure I'm doing something wrong but I haven't figured out what.? I recently bought a switchbot and some meters to test out and see if I wanted to try the CurtainBots or BlindTilts.? I seem to be connecting to the switchbots and getting a response but then I get a format exception, I only have meters/meter plus to test with right now.?
Here is the snippet from the console.
DIN-AP3MEX>SwitchBot - Get_Meter_State - URL: https://api.switch-bot.com/v1.1/devices/XXXXXXXX5676/status
SwitchBot - Security_Test - time = 1695567395089
SwitchBot - Security_Test - nonce = 8eb6bd54-761b-472e-ab56-88389300d959
SwitchBot - Security_Test - signature = PDUPG1DUOVcjMedvxMjFK/Nb4NGk3qSk9NnVRSptjh0=
SwitchBot - Get_Meter_State - Success - response.ContentString = {"statusCode":100,"body":{"deviceId":"XXXXXXXX5676","deviceType":"Meter","hubDeviceId":"XXXXXXXX1FD7","humidity":30,"temperature":26.9,"version":"V2.8","battery":100},"message":"success"}
SwitchBot - Get_Meter_State - Error Retreiving Meter StatusSystem.FormatException: FormatException
?? at System.Double.Parse(String s, NumberStyles style, IFormatProvider provider)
?? at SwitchBot_Integration.SwitchBot.Get_Meter_State(String Device_ID, Int16 Temperature_Format_Selection)
?? at UserModule_SWITCHBOT_METER_V1.UserModuleClass_SWITCHBOT_METER_V1.POLL_OnPush_1(Object __EventInfo__)
?? at Amib.Threading.Internal.WorkItem.o()
?? at Amib.Threading.Internal.WorkItem.Execute()
?? at Amib.Threading.SmartThreadPool.e(WorkItem A_0)
?? at Amib.Threading.SmartThreadPool.p()
Thanks
|
Re: Panasonic Camera keeps moving after button release
I have a trick I use for this, I can send it over to you later today when I am on my computer. Shoot me an email and I can send it to you
|
Re: KNX alternatives to the CGEIB-IP?
Hi, you can use more than one Gateway in an installation to overcome the limitation. ? Cheers, Thorsten ? ? Hello all,
It appears that the?CGEIB-IP is limited to something like 500 addresses, which may be why it has proven to be unstable for us.? The system we are connected to needs closer to 2000.
About 10 years ago I wrote code around a KNX Gateway, but I assume that device is no longer in production, though I would have to dig through very old docs to even figure out what the device was.?
Are there alternatives I should be looking at?
Thanks
|
Yevhen