¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Messages
Expanded Topics Messages Polls
Date
Re: CP3 Ethernet Issues

 

What do others think?
Could a bad network connection (RJ45) cause this kind of issue??
Re: SIP Intercom recommendations

 

Hi Slip,

2N do a nifty interface . I have used it to convert old analogue entry system to SIP. It might suit you purpose as it has I/O ports.

Iain
SIP Intercom recommendations

 

The Grandstream GVX3500 for my front entrance intercom has decided to retire by itself. No amount of fiddling will change its mind.

I'm looking for a replacement recommendation.?

I have a doorbell button that I'd like to keep, and a composite video camera that I'm happy to replace.

I'm looking for a modern alternative with the following:
* Camera support. The GVX allowed me to connect a composite camera which provided enough resolution, but an external IP camera would be fine. I don't want a built-in camera.
* Digital I/O's for the doorbell and contact closure to a DIN-AP3 to trigger events in the program.
* Full duplex SIP to integrate into my FreePBX.

I don't want any keypads, in fact I don't want any form of 'box' outside. The GVX sat in a service hatch in my front porch out of sight. Only thing a visitor sees at my front door is the doorbell button and the camera if they look up.

Thanks
-s
Controlling displays in a Just Add Power System

 

Good Morning All,
I'm programming a J.A.P. system with VBS-HDIP-508POE endpoints with RS232 connected to a display.? The Crestron Module I downloaded from their website for use with their AMP configuration software, has a module for video matrix switching but nothing for controlling the displays from the endpoints.? The documentation says, "For Endpoint Control or Feature Control, create a generic telnet driver, set the IP address to the Receiver or Transmitter you want to control, and follow the directions for the desired control feature".? That tells me to use the TPC/IP client module with the endpoint's IP address and port number, and connect my control module for control of the display.? Is that all?? Are there any settings in the endpoint's GUI for control of the display?
Re: CRESTRON CONSTRUCT first impressions

 

Yea the icons are quite lacking. Who the hell needs Emoji icons? They really should include icons that miror the Crestron Transports/AV/etc. We use them throughout or projects and I have found many I need missing.?
Re: CRESTRON CONSTRUCT first impressions

 

I remember a big todo being made about how many icons were included for buttons. I went looking and noticed there was no projector icon, I did how ever find a poo storm icon. That seems accurate.?
Re: Adagio internal power supply

 

Try RS, they are showing 50 in stock.
https://uk.rs-online.com/web/p/switching-power-supplies/1830098
Re: SIMPL + Programming

 

I have the same error and I found the problem.

The error is in Simpl+ :
line 193, this is not If(Analog_Enable) but If(String_Enable)

Thanks for this module!
Re: Bond Bridge

 

¿ªÔÆÌåÓý

I think you were writing this to me John as I believe I have spoken to drew in the past about my module for Prowl integration.?

I do now have a Bond Bridge Pro.? I don't use it in my own home but the folks at Bond were nice enough to send it to me so I could test my modules and the additional work I was doing to support the use of their Sidekick keypads in a Crestron system.?

Thanks

Jay

On 7/25/2023 4:11 PM, John Gabler wrote:

I believe we have a pro laying around that I wanted to use for a client, but couldn't get the fireplace remote to pair.? I don't believe my boss has done anything with it.? I could send it to ya, if you like.? I believe you have had conversations with my boss Drew for the Prowl integration in the past.

Re: Bond Bridge

 

I believe we have a pro laying around that I wanted to use for a client, but couldn't get the fireplace remote to pair.? I don't believe my boss has done anything with it.? I could send it to ya, if you like.? I believe you have had conversations with my boss Drew for the Prowl integration in the past.
File /Epson PJLink_compiled.zip uploaded #file-notice

Group Notification
 

The following files and folders have been uploaded to the Files area of the [email protected] group.

By: John Gabler <ComeAlive@...>

Description:
PJ Link module for Epson
Re: Epson Projector Crestron Connected

 

I had the same issue.? Just changed control to PJLink and moved on.? In my case there were 3 projectors for a curved golf sim and wanted to have the projectors controlled by the Tee light button from D3.? I push an archive of the projector control simpl
Re: CP3 Ethernet Issues

 

Had a similar issue.? In my case, my client would reboot the network to resolve and we wouldn't have any switch logs to review.? Once I got to it before he was able to reboot, the switch log showed that a WATTBOX connection kept going up and down and was flooding the network with traffic.? Once the flood started the WATCHDOG would shut down the ethernet port on my CP3.
Re: Adagio internal power supply

 

just done a search, no stock anywhere i can find.
anyone have a source?
Re: CRESTRON CONSTRUCT first impressions

 

¿ªÔÆÌåÓý

The obvious choice is an iPad in a launch port case. The TST is ridiculously over priced if you ask me, in the UK at least, at more that triple an iPad solution.

I think Construct has the ability to replace VTPro in some use cases, mainly commercial with many important resi essential features still to come.


On 25 Jul 2023, at 21:06, fabiodaubermann <fdaubermann@...> wrote:

?
With the TST-902's being discontinued, it appears that the TST-1080 is the only replacement??(TST-1080 cannot do smart graphics).
I was hoping that there would be more overlapping time between the phasing out of smart-graphics and gradual phase-in of Construct, a tool that cannot *yet* be a one-to-one replacement for VTPro ( or can it?)
?
We have a project with several TSW-1070's and a single TST-1080.? We wanted to stick to smartgraphics for the time being, but the fact that the TST-1080 can only do HTML throws a big wrench at the whole thing.??
Are there any alternatives for a wireless touchpanel that can still do Smart Graphics?
Re: Looking for Brian Trujillo - TruAV

 

I don't see Brian in the Groups.io member directory, or a LinkedIn profile when Googling "Brian Trujillo +TruAV."
But his personal Facebook profile can be found in the Crestron Professionals Group member list, if you choose to reach out directly that way..
?
Re: CRESTRON CONSTRUCT first impressions

 

With the TST-902's being discontinued, it appears that the TST-1080 is the only replacement??(TST-1080 cannot do smart graphics).
I was hoping that there would be more overlapping time between the phasing out of smart-graphics and gradual phase-in of Construct, a tool that cannot *yet* be a one-to-one replacement for VTPro ( or can it?)
?
We have a project with several TSW-1070's and a single TST-1080.? We wanted to stick to smartgraphics for the time being, but the fact that the TST-1080 can only do HTML throws a big wrench at the whole thing.??
Are there any alternatives for a wireless touchpanel that can still do Smart Graphics?
Looking for Brian Trujillo - TruAV

 

Hoping to get source code for a project you worked on in 2021

Kol/MSTC

Please reply directly
Re: Shelly button press

 

Yes, configuring the I/O URL Actions are generally required on all Shelly devices for feedback to work properly in the modules.

Thanks

Jay

On Tue, Jul 25, 2023 at 6:43 AM jbeir <jeffrey@...> wrote:

[Edited Message Follows]

ah, I see. I need to set Shelly I/O URL Actions.

All set.

Re: PAC2M available

 

Austin TX
6301 - 6320 of 256410