Re: Needing Alternative to Crestron
URC Total Control might be a path forward¡at least for the present dynamic.? Best regards,
Michael S. Moran
toggle quoted message
Show quoted text
On Nov 2, 2022, at 8:35 AM, sbarnesvta@... wrote:
? RTI can be purchased through distribution, dealer setup is quick with non yearly minimums, I haven¡¯t played with apex much but I¡¯ve heard it¡¯s presets easy to get to to speed on and they have plenty of hardware available.?
savant is where I see most other companies going, but require a full dealer setup direct to get started with them. We sold a system early last week (with none of the product in our shop) and installed and programmed it on-site yesterday if that give you an idea of their turn around time. We hated moving from Crestron for a lot of this stuff, but the lead time are ridiculous and if we don¡¯t start using something else these jobs are going to go elsewhere.?
|
Re: Needing Alternative to Crestron
RTI can be purchased through distribution, dealer setup is quick with non yearly minimums, I haven¡¯t played with apex much but I¡¯ve heard it¡¯s presets easy to get to to speed on and they have plenty of hardware available.?
savant is where I see most other companies going, but require a full dealer setup direct to get started with them. We sold a system early last week (with none of the product in our shop) and installed and programmed it on-site yesterday if that give you an idea of their turn around time. We hated moving from Crestron for a lot of this stuff, but the lead time are ridiculous and if we don¡¯t start using something else these jobs are going to go elsewhere.?
|
|
|
Re: Needing Alternative to Crestron
VC4, iPad and global cache??
|
Re: Needing Alternative to Crestron
S ? Just checked a Crestron order for a residential project and is backordered until Q4 2023. Looking for an alternative to a RMC4, TSR-310 and lighting control.
Equipment will be controlled either IR, RS232 or IP. Consisting of a LG display, cable box, Blu-ray, Onkyo surround receiver and lighting controller for 3 switches.
I've looked into URC and RTI but both require dealer login to access software. Ultimately, would need remote access through a control system or I will add a remote PC for remote support.?
Any suggestions??
|
Needing Alternative to Crestron
Just checked a Crestron order for a residential project and is backordered until Q4 2023. Looking for an alternative to a RMC4, TSR-310 and lighting control.
Equipment will be controlled either IR, RS232 or IP. Consisting of a LG display, cable box, Blu-ray, Onkyo surround receiver and lighting controller for 3 switches.
I've looked into URC and RTI but both require dealer login to access software. Ultimately, would need remote access through a control system or I will add a remote PC for remote support.?
Any suggestions??
|
Re: Panopto remote recorder control
The user name and password for for the account that the software uses in order to interact with the server at the url provided. It is a mix of soap and rest so there is no actual connection like tcp.
toggle quoted message
Show quoted text
On Nov 1, 2022, at 9:07 AM, chuckperkinscrestron <charles.perkins@...> wrote:
? Hello, Looking to see if anyone has info on connecting to a Panopto remote recorder and starting and streaming a recording. These are not scheduled recordings.
We have installed the licenses that are required. I have added the Crestron module from the applications market to the program and added all the signals.
When I try to connect to the remote recorder I receive feedback stating I'm connected, yet during further testing I found out I didn't even need the correct Username/password?to get a Connected response.?
Also, in videos send to me from Panoptop they show a "Webcast" button that needs to be turned on to get streaming to start and generate the unique key which gets sent back to the Extron SMP recorder on campus.?
I don't see anywhere in the Crestron module to connect the webcast button to and yet the reps at Panopto say I need to turn the webcast to on inorder for this to work.
I asked TB and they said they don't know anything about how the module works because Panopto created the module, yet Panopto said they didn't create the module.
Thanks for any info you can provide. Chuck
-- Chuck Perkins, CTS, DMC-E-4K ECS Certified EAVA Certified Instructional Support Specialist AV Design and Programming SUNY Oswego 29D Lanigan Hall Oswego, NY 13126 315-312-2413 charles.perkins@...
Campus Technology Services will never ask you to email us sensitive personal information such as a password. Please contact us if you are unsure if an email is genuine. (help@...)
|
Re: NewTek Tricaster control with Crestron
Did you happen to have any luck with this thing?? About to run down this rabbit hole myself.
Thanks!
toggle quoted message
Show quoted text
On Wed, Aug 31, 2022 at 06:18 PM, BruteForceIsUnderRated wrote:
Thanks Michael.?
Did you do anything else that might show if you received anything when a macros was executed? Anything else that you think might be useful to know?
I've never worked with the device and I'm just trying to gather as much as possible before I sit in front of it next week.
On Wed, Aug 31, 2022 at 7:47 AM Michael Block < michael@...> wrote: This worked for me on a project a few years back.
TCP Port: 5951
<trigger name=\x22Macro-1\x22/>\r
Michael
?
?
|
Panopto remote recorder control
Hello, Looking to see if anyone has info on connecting to a Panopto remote recorder and starting and streaming a recording. These are not scheduled recordings.
We have installed the licenses that are required. I have added the Crestron module from the applications market to the program and added all the signals.
When I try to connect to the remote recorder I receive feedback stating I'm connected, yet during further testing I found out I didn't even need the correct Username/password?to get a Connected response.?
Also, in videos send to me from Panoptop they show a "Webcast" button that needs to be turned on to get streaming to start and generate the unique key which gets sent back to the Extron SMP recorder on campus.?
I don't see anywhere in the Crestron module to connect the webcast button to and yet the reps at Panopto say I need to turn the webcast to on inorder for this to work.
I asked TB and they said they don't know anything about how the module works because Panopto created the module, yet Panopto said they didn't create the module.
Thanks for any info you can provide. Chuck
-- Chuck Perkins, CTS, DMC-E-4K ECS Certified EAVA Certified Instructional Support Specialist AV Design and Programming SUNY Oswego 29D Lanigan Hall Oswego, NY 13126 315-312-2413 charles.perkins@...
Campus Technology Services will never ask you to email us sensitive personal information such as a password. Please contact us if you are unsure if an email is genuine. (help@...)
|
Re: Programming with Fusion for Multiple DMPS3s
#Fusion
As I understand it, that capability is now built into the latest "core" SSI module.? I don't believe a seperate updater/helper module is needed.
|
Re: NVX Video Blanks When Any endpoint reboots.
Thanks. We have done that once during this project, and may end up doing so again. We now have Crestron ATSG's full attention, and will be updating switch firmware today. I will update the group if/when we get this resolved.
|
Re: Global Cache with RMC4
Global cache has their control tower website that will send you entire libraries with both hex and global cache codes included.
|
Hi to all
tell me how to change the sound source on Denon AVR-X2700H from CD to another in quick actions for the receiver.
Or another way to change input. I got Sonons and TV connected to it, but in sound settings got only Sonos as a source...
Thanks
|
Re: Global Cache with RMC4
Can you describe the conversion procedure with C5?
toggle quoted message
Show quoted text
--- Monday, October 31, 2022 at 4:14 PM, Nathan Durfee wrote:
You can also use C5 Debugger to convert most crestron IR files to global cache.
Only files that contain multicodes don't work with C5 atm
|
Re: Global Cache with RMC4
You can also use C5 Debugger to convert most crestron IR files to global cache. Only files that contain multicodes don't work with C5 atm
|
Re: Global Cache with RMC4
Thanks, figured it out. The module for the IR is worthless.
|
Re: Global Cache with RMC4
Use the Global Cache iConvert utility to convert hex IR codes to their sendir format. You can get that from https://www.globalcache.com/files/software/iConvert.zip?
|
I've seen some threads on using an SIO to send IR commands through a GC but not certain what format to send.
I have hex values for the IR. Is there a conversion that needs to happen or a header that needs to be added?
|
LG 75UL3J-E RS232 feedback
#rs232
We have several of these LG displays that are being controlled via RS232 and "Power On" and "Power Off" are working but not Power Polling. When sending the command "ka 01 ff\r" I don't get a response and eventually will timeout .
These do have Crestron Connect available but unfortunately controlling via IP isn't an option.
I've sent an email to Commerical LG Support but still waiting.
|
Re: Programming with Fusion for Multiple DMPS3s
#Fusion
Hey Aaron,?
Search the website for the "Crestron Fusion? Software SSI Module Programming for SW-FUSION" reference guide. That's what I referenced when refreshing our Fusion integration several years ago.?
Ben
Hello!
I'm working on a new code refresh for our DMPS3s that we have on our campus, and would like to use one code for all them. If I'm reading correctly, it looks like I should probably use the GUID helper module in the programming for importing into Fusion, however I'm a little confused how it should work. Is there a good place I should look at that has good documentation on what signal goes where or if I should even use this? I've tried looking at AID 5433, but I guess since our account is A+ Education account I can't view it so any help would be much appreciated.?
Thanks!
-- Ben Lizzotte
Assistant Director of Client Services Bates College207.786.6423
|
