I had even reached out to Bose to make an offer but they said that they "had internal Crestron contacts already" basically.. lol

--

Anyone else getting failure on?Get-AutoDiscovery?

PS C:\Users\dportugal> Get-AutoDiscovery -showprogress Get-NicAdapter : You cannot call a method on a null-valued expression. At C:\Users\dportugal\Documents\WindowsPowerShell\Modules\PSCrestron\AutoDiscovery.psm1:160 char:17 + $nics = Get-NicAdapter + ~~~~~~~~~~~~~~ + CategoryInfo : InvalidOperation: (:) [Get-NicAdapter], RuntimeException + FullyQualifiedErrorId : InvokeMethodOnNull,Get-NicAdapter

I finally implemented Mat's modules on a project today after a fit of rage over the flakiness of the Crestron-authored modules. They're working great in production.

I have been using the Generic Source CEC module to control it for about 2 weeks with no issues.

Power goes out for an hour and when it comes back up no more control of the Chromecast.

Finally changed the address from Playback Device 1 to Playback Device 3 and it works again.

Looking to find out what happened and why?

Anyway to stop it from happening again and is there a better way to control it?

Thanks
Jason

开云体育

I worked with TB to get v5.0 fixed. The issue is the StayAlive configuration in C#. I have yet to have any issues using Mathew Klucznyk's version and are simplified compared to Crestrons.

Hi, any news about Bose and 4 Series?

Fenix web server is really easy to use for static content.

http://fenixwebserver.com/

+1 to using a combination of the Crestron Certified Driver (commands) and "Roku 3 Series" module (channel recall) from the Files section.?

Like others, I am using an oscillator on the direction commands.? Without it, I occasionally get a direction acting like it was pressed and held.

this is an update for all those who may run into this in the future.? I have finally figured out why this is happening.? Seems that there are two versions of the card, the ATC-AMFMSR and the ATC-AMFMSRD.? The only one that is compatible with CH is the ATC-AMFMSRD.? If you have the other one, you are fresh out of luck.? Hope this helps someone else and thank you so much Ryan for your input.

Interesting, all I get when I go to settings on the pair page and under the channels tab is a single line to name the TRACK.? Am I missing something?? Could you elaborate a bit more?? here is what I have done.

I went to the pairing page and selected Crestron Wired and WiFi>Ethernet and Wi-Fi
The CEN-TRACK showed up in the list so I selected it and added it to the room
I clicked on the settings gear and then the channels tab.
Only one line items showed up to be named and that was the TRACK itself.

Did I miss something here?? This is one of my first projects with a CH so don't worry about offending me with things that I might have forgotten.? I am happy for anything you can suggest.

Yes it works. I did one a few weeks ago with the same card in it. Open the settings of CEN-TRACK on pair devices page to name the tuners something.
In source routes page you should see the option under CEN-TRACK to route audio connections for all tuners installed in the CEN-TRACK.??

There's some videos in OLH: 2015
What's your level of experience with HTML/CSS/JS?

You could try the CH5 xpanel, mentioned on another thread here, the github project link -?

There are a few resources listed here -?

Most people I know are staying away from the CH5 components and are just using the crcomlib or going with a websocket, totally away from Crestron's solution

thought it may have been, posted here as well (in case people were searching for an answer)

Has anyone been successful in tying a CEN-TRACK-AMFMSRD to a Crestron Home system.? I can pair it but it only comes in as the CEN-TRACK.? Any suggestions?

On Tue, Feb 22, 2022 at 02:52 AM, <alex@...> wrote:

The only issue I remember having is the mute toggle would occasionally not work (on an older unit, SR5007). This was due to the feedback not updating, therefore kept sending mute off instead of swapping between on and off in the module. Sending the mute via the IR remote seemed to fix it and get it to work again but a bit of an odd one.?

Yeah I found that a long time ago with the Denon units, had to go into the module and adjust the timing and also poll the unit when turning it off - We saw that if the unit was Muted when turned off, then when it turned back on, the module assumed that it was opposite what it was...

My Application is using a Pro3 with the TSRs.?
Since we Changed the APs from uBiquiti to Araknis (Though I agree that it is likely nothing to do with the Ubiquiti units) and set up dedicated SSIDs for each remote,? we have not seen the hanging SubPage issue for the last 5-6 months...

One thing we've also seen is that though we have a Dedicated SSID on each AP and lock individual TSRs to one AP/SSID, sometimes when the network is rebooted, the TSRs will connect to another SSID. in particular it would connect to the 'xFinity' SSID ...Yes, we had turned it off, but you know that tech knows better so it would occasionally turn back on...
This is particularly annoying as we have, multiple times, told the TSRs to forget this SSID, but it will still do it sometimes...:(:(:(

We can only wish that would be possible :o)

Yes I have seen the opposite were sub pages don't show up even though they are asserted.? In my case, it was caused by too much multicast traffic on the network overwhelming the TSR-310.? Enabling IGMP snooping on the switches and APs solved the issue for me.? I would imagine that broadcast storms or just too much network broadcast traffic could cause similar issues.? But in my case, WireShark showed that it multicast chatter rather then broadcast traffic that was causing the issue. I would also consider putting the TSR-310's on there own SSID and subnet to isolate them from the rest of the network for installations that have lots of network devices.

I went through this last year, there's notes on crestron's website look up xpanel conversion tool