Keyboard Shortcuts
Likes
- Crestron
- Messages
Search
|
Re: LG OLED 232
¿ªÔÆÌåÓýCEC should be an option if you¡¯re using something that can generate CEC. ? -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D ? From: [email protected] <[email protected]> On Behalf Of
Ben
Sent: Wednesday, January 6, 2021 9:33 AM To: [email protected] Subject: Re: [crestron] LG OLED 232 ? not OLED but had this issue on some 75ul3e's. would work fine turning on/off when testing, then when left off overnight they would fail to turn back on. ended up being the firmware, which for some reason wouldnt load on site so had to go back to LG get to be done by them. now working fine.? |
|
Re: Samsung CCD IP Driver
Until you have everything working, hook up the driver log output and the user attribute label and description outputs from the module so they can be viewed in SIMPL Debugger.? Those outputs will give you some good tips on what might be wrong and that info doesn't get written to the processor logs.? Until I forced values into the warmup and cooldown times, I had a driver log message indicating the times had to be set to something; the driver wouldn't even attempt to connect to the TV until they were set. Geoff On Wed, Jan 6, 2021 at 11:08 AM rickwookie <rickwookie@...> wrote: Does the power on not work, or does it just not come on for over a minute after you issue the commands? I found I had to nest the warm up and cool down parameters both to 1 second as the default value is really long. |
|
Re: 12V trigger with CP4 Versiport
I think that you'd probably be more successful using a step-down from the 24VDC Cresnet through a relay than stepping up a 5VDC Versiport output.
The Versiport output is a very, very low current output. I've had no problems using a step-down on the Cresnet.? You'll just have to use a relay instead. I always use a diode on the transformer input just to protect the Crestron processor a bit more. |
|
Re: Apple TV home button app
As discussed in the previous thread, Pressing and Holding the MENU command with the standard IR driver will bring the unit to the HOME screen.?
My experience is that even changing the settings to call the TV App does not work with P+H of the MENU button - Glorious inconsistency!! |
|
Re: Samsung CCD IP Driver
I've got control of the 55TU700D, but Power ON is not working (go figure).? I'm using CCD 1.9 and have tried both 2.x & 4.x drivers.? I swear I did get the Power_Toggle to turn the TV on once with the 2.x Driver, but can't get it to do it again.? Perfectly useless control if I can't turn the stupid thing on.? I may as well be using discrete IR at this point.? Or more than likely I'll be returning it and getting into a higher spec display series.? Its also very frustrating that with this TV nor the Q70 offers a command to turn the TV to a smartapp nor does it offer good feedback about smartapp "input" status. ? Mark, I've built this up as a simple program that does nothing but control the TV via Debugger if you'd like me to send you what I have, I can.? I did note in my logs when loading up my second version with Driver 2.x the log mentioned something like "control not acknowledged by the remote, will ask again".? Since I was in another room at the time I walked out to the TV and noted that I needed to click the allow IP control prompt.? On the TV under Network, expert settings I have "power on with mobile" and "IP remote" on/enabled.? I believe you said you had this on as well, just wanted to make sure.? Also at some point I realized I had the Driver path test with a Typo and for the record I call out the path the .PKG not the actual driver?\\USER\\FlatPanelDisplay_Samsung_QN43LS03TAFXZA-SmartTV_IP.pkg as a value in a Multiple Discrete Serial Send. |
|
Re: LG OLED 232
toggle quoted message
Show quoted text
|
|
Re: LG OLED 232
toggle quoted message
Show quoted text
|
|
Re: Topics in Home Automation - New Article in Residential Tech Today
Local or cloud control? I know you are not a fan so hoping it is local.?
However, from the brief skim of the ReadMe it looks like there is no feedback of the door status. Is that the case? I know MyQ has shut down previous attempts to provide fb (unless you subscribe to their service) so I will not be surprised.? |
|
Re: End of Flash/Air?
I have the same thing, just updated VT-ProE and now when I click the ¡®Run¡¯ it processes the file but doesn¡¯t run the XPanel emulator.
I did find that pressing ¡®Run¡¯ once or twice more will actually work. Just seemed to take a few presses before the XPanel will actually popup. |
|
Re: LG OLED 232
toggle quoted message
Show quoted text
|
|
Re: LG OLED 232
Ben
not OLED but had this issue on some 75ul3e's. would work fine turning on/off when testing, then when left off overnight they would fail to turn back on. ended up being the firmware, which for some reason wouldnt load on site so had to go back to LG get to be done by them. now working fine.?
|
|
LG OLED 232
Just started a job with some LG OLED consumer grade displays on a commercial project. ?It looks like the 232 port on the display shuts off when you turn the display off (thanks LG). ?We've shut off all power saving modes, but still no success. ?LG tech support is claiming 232 is only for service. ?IP control is probably not going to happen due to client network, so that may not be an option. ?We could always go IR, but I wanted to see if anyone was aware of a way to keep the 232 port alive. ?TIA
|
|
Re: 12V trigger with CP4 Versiport
¿ªÔÆÌåÓýThanks for the response. So it might be that i tested with a device that doesn?t need the full 12V. But I understand my general approach using ground and a pin of the Versiport, pu-disable for that port low or not defined, and triggering the corresponding signal oX on the Versiport should do the trick. Perhaps it could work with a step-up converter¡ ? ? Von: [email protected] <[email protected]> Im Auftrag von Mitch Bigelow ? It depends on the device.The versiport will output 5V, some devices might consider that high enough to trigger, some might not. |