¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Messages
Expanded Topics Messages Polls
Date
Re: Please Help with IR Emitter output Pro 2 completely stumped and frustrated :)

 

On Wed, Nov 25, 2020 at 08:17 AM, ckangis wrote:
I would strongly recommend Winford products, they have all sorts of little solutions, converters, adapters, etc. I have used them for 15+ years
www.winford.com
Specifically:? ?
Re: Crestron GO on iPad - no keyboard popup

 

Landscape mode? I found that keyboard didn¡¯t ¡°pop up¡± on landscape mode before Crestron go app was released. It was popping up you just couldn¡¯t see it as it was off screen. I had to rewrite my whole iPhone project to portrait to get keyboard to show for Mediaplayer
Re: Polycom director

 
Edited

ok, sorry for misleading you. I checked the link you provided and within I found that port 4933 is used for control via UDP. But I didn't find info on control commands

Here's the link to the info



have a nice day
Re: Polycom director

 

They do provide the REST API on the support page for the Eagle Eye director :?



But it does not look like commands I can use with a Crestron system. And no mention of calling / saving presets in that document.

As for the module in the app market, it is a module for older Eagle Eye with RS-232, Director is LAN only. Could it work with a TCP/IP module? Someone know what TCP/IP port to use?

Thanks.

?
Topics in Home Automation - New Article in Residential Tech Today

 

My latest article,?"Does Your Smart Home Need Cyber Insurance?¡±?is being published by the good folks at Residential Tech Today Magazine on their web site.? The article explores whether smart home technology exposes? homeowners to cyber risks and the offerings by major insurance companies to protect homeowners from cyber threats.


You can find the article here:



For those interested in earlier articles that I've written, you can find those here:

?

Finally, for those that want to see even more content I've written about smart home technology you can find that here:

?

?

Thanks
Re: Using the latest Software and Firmware - 11/24/20

 

Those exact versions are what I've used to fix a couple Sonos sites recently. That recent DevDB 200.25.003 seems to fix the ones I've patched. They are working so far, and are S1 and S2 sites. For now at least...
Re: Please Help with IR Emitter output Pro 2 completely stumped and frustrated :)

 

I would strongly recommend Winford products, they have all sorts of little solutions, converters, adapters, etc. I have used them for 15+ years
www.winford.com
Crestron GO on iPad - no keyboard popup

 

brand new iPad & Crestron GO
client says the keyboard will not popup on the 'Add Location' screen
app isn't locked??

?mark
Re: Please Help with IR Emitter output Pro 2 completely stumped and frustrated :)

 

Agreed with the suggestion that it probably makes as much sense to cut the plug off and strip the wire.

If you don't want to cut any cables, the AAOTOKK 2 conductor version of the adapter makes more sense than the 3 conductor version from CERRXIAN for this application.

Geoff


On Wed, Nov 25, 2020 at 1:14 AM Oil Country <conrad99@...> wrote:
Thanks for all the advice so far, looks like I will try to pick up some Xantech emitters, just trying to find a good online order place as in Canada as can not purchase?
?local here.? What I am curious what you would recommend out of the two options one is a 2 screw and the other one a 3 screw terminal not sure what I need as I thought Xantech emitter was only 2 wire

MSTC I really like you idea of ordering?

A) CERRXIAN 3.5mm Stereo Audio Video Female Jack to 3 Screw Terminal Female Headphone Replacement Solderless Balum Converter Adapter (2-Pack)

>,

?but I am curious would I not want this item instead as the Phoenix connector in just a 2 wire connection?

?

B) AAOTOKK 3.5mm Screw Terminal Gold Plated 3.5mm (1/8") TS Mono Female to 2 Pin Female Screw Terminal AUX Headphone Balun Solderless Converter Adapter(5-Pack/Female)





That being said I spoke to the Xantech tech rep and he said just cut off plug and wire directly into Phoenix connector after cutting off the 3.5 mm plug off Xantech emitter and take those two wires directly to the Phoenix connector.? Just worried the wires would be to wispy or thin to get good connections, ?any thoughts or experience with this option.

Thanks again everyone so far for advice


Oil Country

Crestron Home KNX driver

 

Hello,

I am looking for the KNX driver to Crestron Home. Maybe i will try to develop one, but i found on the Ultimate site, that is only CCD for Lutron driver and there is no templates for lighting.
Is this true?

Regards
KR
Re: Dumb question

 

Hello Fury,?

In the case of having a server with multiple media player mini,? how exactly do you control the zones with the media players independently?? If this is possible, would all the commands be going to the server?? Or to the actual Media Player directly?? ?

Thanks in advance,?

Luis
Re: Please Help with IR Emitter output Pro 2 completely stumped and frustrated :)

 

Another reason to go with Xantech emitters, they are very consistent. Stripe is always the signal and you know there will be plenty of good copper wire to screw down into.?

TH?

Il giorno mer 25 nov 2020 alle 07:14 Oil Country <conrad99@...> ha scritto:
Thanks for all the advice so far, looks like I will try to pick up some Xantech emitters, just trying to find a good online order place as in Canada as can not purchase?
?local here.? What I am curious what you would recommend out of the two options one is a 2 screw and the other one a 3 screw terminal not sure what I need as I thought Xantech emitter was only 2 wire

MSTC I really like you idea of ordering?

A) CERRXIAN 3.5mm Stereo Audio Video Female Jack to 3 Screw Terminal Female Headphone Replacement Solderless Balum Converter Adapter (2-Pack)

>,

?but I am curious would I not want this item instead as the Phoenix connector in just a 2 wire connection?

?

B) AAOTOKK 3.5mm Screw Terminal Gold Plated 3.5mm (1/8") TS Mono Female to 2 Pin Female Screw Terminal AUX Headphone Balun Solderless Converter Adapter(5-Pack/Female)





That being said I spoke to the Xantech tech rep and he said just cut off plug and wire directly into Phoenix connector after cutting off the 3.5 mm plug off Xantech emitter and take those two wires directly to the Phoenix connector.? Just worried the wires would be to wispy or thin to get good connections, ?any thoughts or experience with this option.

Thanks again everyone so far for advice


Oil Country

--
Regards
Tony Howard

T?|?B?|?T

+39 333 597?1791?|?Italy - Aust?|?+61 412 967 619?
Re: C Bus Fan Control with Crestron

 

C-Bus Diagnostic Utility is your friend.? It will give you all the strings required to control C-Bus devices.? Assuming you already know which group addresses you need to control.?
C Bus Fan Control with Crestron

 

Hello,

Need help in controlling the C Bus Fan controller with Crestron Processor is there any module available for the Fan Speed control?

Thanks,
Re: Please Help with IR Emitter output Pro 2 completely stumped and frustrated :)

 

Thanks for all the advice so far, looks like I will try to pick up some Xantech emitters, just trying to find a good online order place as in Canada as can not purchase?
?local here. ?What I am curious what you would recommend out of the two options one is a 2 screw and the other one a 3 screw terminal not sure what I need as I thought Xantech emitter was only 2 wire

MSTC I really like you idea of ordering?

A) CERRXIAN 3.5mm Stereo Audio Video Female Jack to 3 Screw Terminal Female Headphone Replacement Solderless Balum Converter Adapter (2-Pack)

amazon.com/Cerrxian-TerminalHeadphoneConverterAdapter/dp/B06W2KB8ZV/ref=sr_1_19dchild=1&keywords=3.5mm+female+connector&qid=1606230659&sr=8-19>,

?but I am curious would I not want this item instead as the Phoenix connector in just a 2 wire connection?

?

B) AAOTOKK 3.5mm Screw Terminal Gold Plated 3.5mm (1/8") TS Mono Female to 2 Pin Female Screw Terminal AUX Headphone Balun Solderless Converter Adapter(5-Pack/Female)


https://www.amazon.com/AAOTOKK-Terminal-Headphone-Solderless-Converter/dp/B07TXT763M/ref=sr_1_1?dchild=1&keywords=aaotokk+3.5+screw&qid=1606284241&sr=8-1


That being said I spoke to the Xantech tech rep and he said just cut off plug and wire directly into Phoenix connector after cutting off the 3.5 mm plug off Xantech emitter and take those two wires directly to the Phoenix connector. ?Just worried the wires would be to wispy or thin to get good connections, ?any thoughts or experience with this option.

Thanks again everyone so far for advice


Oil Country
Re: Roomview Connected Displays and Flash

 

¿ªÔÆÌåÓý

And only some of them ¨C I did a bunch of LG displays in Brazil last week (don¡¯t get me started on why they weren¡¯t serial to begin with¡­) and did the display-end configuration entirely via the OSD because no one could figure out the user name/password for the webpage.

?

--

Lincoln King-Cliby, CTS, DMC-E-4K/T/D
Commercial Market Director
Sr. Systems Architect | Crestron Certified Master Programmer (Diamond)
ControlWorks Consulting, LLC
Direct: (+1)440.771.4807 | Cleveland: (+1)440.449.1100? | Boston: (+1)508.695.0188 | DC: (+1)202.381.9070? | Fax: (+1)440.449.1106
Crestron Services Provider | Biamp Authorized Independent Programmers | Extron Qualified Independent Programmer

?

From: [email protected] [mailto:[email protected]] On Behalf Of CDUB340
Sent: Tuesday, November 24, 2020 1:00 PM
To: [email protected]
Subject: Re: [crestron] Roomview Connected Displays and Flash

?

That's correct, you really only need the Flash interface to set the IPID on the device.

Using the latest Software and Firmware - 11/24/20

 

Hi All,
So I thought I would start a new thread on this since it really doesn't have to do with Sonos, specifically.
I'm finally going to update to Post-200 DBs and all that goes with it :(? due to the need to get Sonos working again...

1. Do the updates listed below work with Sonos systems that are running the latest S1, as well as the S2 updates?? just checking to see if others have had good results
2. Other than the NewtonSoft update requirements for going to Post-200 DBs, are there any other known issues to watch out for with these updates??

What Crestron is recommending to fix the Sonos Issues:
3-Series FW v1.603.0113
And this Software:
Re: Please Help with IR Emitter output Pro 2 completely stumped and frustrated :)

 

I also would only use Xantech emitters (The Crestron ones are Xantech...)
I have used every other major brand of emitters over 36 years and had issues with all of them (with/without Crestron) and the fix was always to swap them out for Xantech!!
There is NO good reason that Xantech LEDs are that much different from all others but apparently they are!??
I refuse to Trouble-shoot IR issues until the polarity is checked and emitters are swapped to xantech...
(I wish I owned stock in them!? HaHa)
Re: AppleTV Context Menu Access

 

Just to close the loop on the IR codes, the AppleTV IR file I'm using came from the downloads, not the application market.? From what I can tell, it contains the codes that are in the Global Cache database.? Here's the link:


Geoff

On Mon, Nov 23, 2020 at 2:48 PM Geoffrey Reynolds via <greynlds=[email protected]> wrote:
The one I'm using is named "Apple Apple TV 4th GenXEN.ir" and has the following commands:

cursor_down, cursor_up, cursor_left, cursor_right, select, ffwd, rew, menu_home, menu, options, output_resolution, play-pause, ffwd_10x, rew_10x, restart, stop, time_display, and diagnostic_logs

I thought it came from the application market, but I may be misremembering.? I have another one named "Apple_TV.ir" that has just 7 commands, which sounds like the one you just downloaded.

Geoff

On Mon, Nov 23, 2020 at 2:31 PM web1111a via <web1111a=[email protected]> wrote:
I just downloaded the applicaton market one and all I see are up down left right menu and play pause

Am I missing something

Re: Polycom director

 

Hi,

? ? polycom doesn't manufacture the cameras and the API is confidential. You need to use the module from the appmarket or from drivers.crestron.io
18181 - 18200 of 256472