Re: Roku IP Dynamic Graphics

#220077

Have you set up the default gateway and DNS addresses?

On Sat, 25 Feb 2017, 19:04 rpc_78@... [Crestron], <Crestron@...> wrote:

?

VTProe:
Use an Image Object.
Use Modes or Dynamics Graphics: Dynamic Graphics
Indirect Graphics Path Serial Join: serial join number

SIMPL:
On the Roku IP Module:
RokuAppIcon[1} string is sent to the serial join on the panel

I have it sending App Icons to the Crestron App on iOS, should work the same on a TSW

Re: Roku IP Dynamic Graphics

#220076

VTProe:

Use an Image Object.

Use Modes or Dynamics Graphics: Dynamic Graphics

Indirect Graphics Path Serial Join: serial join number

SIMPL:

On the Roku IP Module:

RokuAppIcon[1} string is sent to the serial join on the panel

I have it sending App Icons to the Crestron App on iOS, should work the same on a TSW

Re: Apple TV with app Vimeo pause feature

#220075

开云体育

Ok thanks ,?

I will try that now .?

Thanks ,?

Mingo?

Show quoted text

On Feb 25, 2017, at 10:43 AM, kgossen@... [Crestron] <Crestron@...> wrote:

?

I use the AppleTV 4 and 3 as well and use the ATV3 IR driver on both, Vimeo pauses.

I also switched over to IP control using files from here on both the 3 and 4 and pause works great on both as well.?

Re: Apple TV with app Vimeo pause feature

#220074

I use the AppleTV 4 and 3 as well and use the ATV3 IR driver on both, Vimeo pauses.

I also switched over to IP control using files from here on both the 3 and 4 and pause works great on both as well.?

Re: Apple TV with app Vimeo pause feature

#220073

开云体育

I'm using Apple TV 4th generation IR module and the pause works fine except for the app Vimeo .. that's so weird and I don't get it .?

Thanks ,?

Mingo?

Show quoted text

On Feb 25, 2017, at 10:01 AM, kgossen@... [Crestron] <Crestron@...> wrote:

?

Is this a trick question?

Select button or Play/Pause work fine on every AppleTV I've done.?

Re: Apple TV with app Vimeo pause feature

#220072

Is this a trick question?

Select button or Play/Pause work fine on every AppleTV I've done.?

Re: Cisco SX80 with Crestron SSH

#220071

Does changing the Unique ID help? That's easy to automate.

When I try to connect, nothing happens at all. No information about key request/exchange. Nada. Like it's not even making the socket connection.

Did you set "Accept All Keys" to Yes or No?

Apple TV with app Vimeo pause feature

#220070

Does anyone knows how to add pause or what ir driver to use for the pause to work with Vimeo on Apple TV ?

Re: Cisco SX80 with Crestron SSH

#220069

I've had tonnes of problems usin the crestron SSH module on Cisco VC units. I've had to change the unique ID every time the processor restarts.

Cisco SX80 with Crestron SSH

#220068

Any use the latest Crestron Cisco SX module (2.3) with SSH? I can't get it to connect. I can connect to other devices using SSH from the same Crestron processor without issue. I can also SSH into the Cisco SX using a terminal program, so I know SSH is enabled on the SX and that I'm using the correct username/pw.

Any help would be greatly appreciated and hopefully save me from banging my head against the wall all weekend!!

-Neal

Roku IP Dynamic Graphics

#220067

Has anyone been able to get the dynamic graphics to work on the Roku IP module found here? ?I can get the icon in my web browser but can't get anything to show up on a TSW160 panel. ?Any help would be appreciated. ?Thank you!

Re: Polycom HDX Calendar Meeting

#220066

Group series uses the same api for calendar info.

I have a module I'll be going live with next week.?

Happy to share if you'd like

Re: LG Signage Tile Modes?

#220065

Thanks for the info. How do you get to the service menu in these?

Re: Polycom HDX Calendar Meeting

#220064

Contact polycom. They have a module for the hdx, but not the group series.

Re: Latest SWAMP firmware: Added doorbell feature capabilities

#220063

Has anyone been able to make this work? Do you trigger the zones to turn on and switch to the doorbell by hitting the "Doorbell Enable On"? The when doorbell wav file is done, hit the "Doorbell Enable Off" to return to previous source?
Any help is appreciated.

Re: ip cameras

#220062

开云体育

IC Realtime

?

Show quoted text

From: Crestron@... [mailto:Crestron@...]
Sent: Thursday, February 23, 2017 12:19 PM
To: Crestron@...
Subject: RE: [Crestron] ip cameras

?

what brand of cameras?? we have 50 up and 50 down, bandwidth should not be the problem here.

---In Crestron@..., <ComeAlive@...> wrote :

Just curious what their UPLOAD side is.? Just checked my clients settings.? Sub stream is D1 (704x480) 15 FPS 1280 Bit Rate.? H.264H.? Takes 2 Seconds to pop up.? My clients updside is 25M

?

Make sure your bit rate down too.?

?

I have another client that live in the middle of nowhere with a bonded dsl to get 12M down and his up is let than 1M.? His cameras are setup exactly the same except for the frame rate is 400.? His cameras only take about 5 seconds to show.

?

From: Crestron@... [mailto:Crestron@...]
Sent: Thursday, February 23, 2017 10:36 AM
To: Crestron@...
Subject: Re: [Crestron] ip cameras

?

thanks for response.? i can say on this particular install we are down to 320 by 240 and a frame rate of 10 by 128 kbps, well below the recommended settings and it still takes 20 seconds remotely.

Re: Philips Hue

#220061

Thanks Chip, figured it out. Found the Q24 api and modeled after that, what a pain! I cant believe you did that all in SIMP+ ... thank god for SIMPL#!

Re: Kodi Commands

#220060

Thank You. I wasn't aware of that.

I have got it all working pretty good thus far. I'll see what more I can get out of it in debugger. I've found, through different forums, examples for what I was looking for. Seems the POST command I put earlier isn't all needed. I'm now using for example?{"jsonrpc":"2.0","method":"Input.ExecuteAction","params":{"action":"rewind"},"id":1} for rewind and using the same for all commands, just changing the action based on the action list for basic controls. I can launch directly to pictures, music and videos/files with GUI.ActivateWindow. That one took longer to get figured out. Next I want to try to tackle launching specific sub menus of add-ons. Not knowing anything about json a couple days ago I'm learning as I go. At least it's for me and not having a client pushing things.

?

LG commercial LCD module with volume feedback

#220059

Does anyone happen to know of an LG rs232 module that has a working volume feedback for the current crop of LCD panels. The various modules available all work for control and basic feedback, but the volume fb ramp just sits at 0d. I checked the modules posted on the group and those didn't work for volume fb either. Anyone come across a module where this works? We are using the MB-P10 keypads in some rooms with these and actual volume fb would be nice for the ramp graphic above the knob. There isn't a way I know of to directly set volume on the tv at startup so I could make a simulated feedback, or to read current volume level in any format I know of. Curious if anyone found one that works. For reference the model we are using is an LG 55lw340c

-Ilya

Re: Polycom Group Skye for Business Cloud/O365 integration

#220058

开云体育

On a related note for anyone this may help, we just integrated the PTZOptics 12X USB camera with the RL2. It's fully detected and controllable by the RL which I wasn't expecting as it's not on Crestron's list.?

The camera has simultaneous HDMI, USB and IP feeds for video and a module for RS232 that works. At this point I couldn't be more pleased with it. It's detected and controllable by the Skype interface and it seems RL is no exception.?

We even have it going through an Extron USB SW switch and CAT5 extender, switching between a table laptop, local PC, and the RL along with a DSP-1282 also connected to the USB hub. Both the camera and dsp are detected and work through all 3 devices including the RL.?

We initially wired the camera for USB control from pc and laptop only, with an hdmi to USB video converter for the RL. That's why we needed a camera with simultaneous hdmi and USB outputs. But once we started testing we found that the RL detected both the camera and dsp through the 3.0 port on the back as well (even though the directions state to only plug a USB camera into that port). It wasn't our intention to use it that way, but it turned out to work. It's a new install so we have more testing to do, but I wanted to pass that on. At a minimum the RL does both detect and control the PTZ optics camera. So we have simultaneous USB and 232 control. The initial startup page on RL with the test pages both displays and controls this camera.?

-Ilya?

Show quoted text

On Feb 24, 2017, at 5:36 AM, jbudz1977@... [Crestron] <Crestron@...> wrote:

?

I've heard that MS is very strict on the UI for S4B, that is the reason that RL2 has to "flip" between S4B control and room control. ?I haven't been very impressed on the S4B UI in RL2 myself, has some things that just don't work like they should. ?I have interfaced room camera systems with the RL2 using Vaddio AV Bridge to convert the HDMI and Audio to USB. ?

All of these web conferencing systems seem to work best when you use a computer to operate them. ? ?