开云体育

After speaking with them, their support said many have tried and failed
with crestron.
Not sure what that means.
But yes some how Control 4 does it? I will ask my control 4 buddy and see
how.

From: Chip <cfm@...<mailto:cfm@...>>
Reply-To: "Crestron@...<mailto:Crestron@...>" <
Crestron@...<mailto:Crestron@...>>
Date: Tuesday, April 30, 2013 8:51 PM
To: "Crestron@...<mailto:Crestron@...>" <
Crestron@...<mailto:Crestron@...>>
Subject: [Crestron] Re: Grace Internet Tuner



If they won't release an API, how did Control 4 get it? :)

- Chip

--- In Crestron@...<mailto:Crestron%40yahoogroups.com>, Seth
Olle <seth@...> wrote:

Of note contacted Grace Digital.
At the moment they won't release the API.
Also they have no current support for Crestron.
They do have control 4.

------------------------------------




Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.
Yahoo!
Groups Links

Perhaps something like this?



digital_input trig;

analog_input value;

digital_output waiting;



push trig

{

if(waiting=off)

{

waiting=on;

wait(3000,timer)

{

waiting=off;

//code that will run when timer expires

}

}

}

change value

{

if(waiting=on)

{

cancelwait(timer);

waiting=off;

//code that will run if timer canceled

}

}



From: Crestron@... [mailto:Crestron@...] On Behalf
Of coolaiddrinker
Sent: Tuesday, April 30, 2013 1:10 PM
To: Crestron@...
Subject: [Crestron] Wait function within SIMPL+





I am having issues with a small code. During a push event, i want to be able
to wait for 30 seconds.

If the wait functions timesout, then one block of code within push event
will be executed.

or If i receive a change in analog input, i want to cancel that wait and run
separate code of block within the same push event.

how do I achieve this?

TIA





[Non-text portions of this message have been removed]

Of note contacted Grace Digital.
At the moment they won't release the API.
Also they have no current support for Crestron.
They do have control 4.

If you point to a "random" site URL, you're just going to get HTML back
which is sometimes easy to parse, but is more often a PITA to parse - and
is something I would not suggest doing for something you're going to
deliver to a customer as it's way too likely that the owner of the site
will change something at any time that will break your parsing logic. If
you want something like a RSS feed to work with, that has to be something
that the site supports and again, make sure it's advertised as a feature of
the site if it's something you're going to deliver to a customer.

Geoff


On Wed, May 1, 2013 at 7:23 AM, grumpy_cake <crestron@...> wrote:

**


Hi,

I've just finished the "Hello World" of scraping in a project and have a
nice but pointless weather display on my touch panel to save me looking out
of the window.

I decided to do something a bit more useful and get some local train times
on there....

Thought this was a good place to start:



I don't seem to be getting back what I was expecting and wondered if I
have misunderstood how this works.

My main question really is

Should I be able to do this?
or does the site have to offer up some form of rss feed like yahoo does?
Or am I not going to be able to scrape sites that are generated using PHP
or ASP?

Thanks for any help,

Matt

[Non-text portions of this message have been removed]

**


Hi,

I've just finished the "Hello World" of scraping in a project and have a
nice but pointless weather display on my touch panel to save me looking out
of the window.

I decided to do something a bit more useful and get some local train times
on there....

Thought this was a good place to start:



I don't seem to be getting back what I was expecting and wondered if I
have misunderstood how this works.

My main question really is

Should I be able to do this?
or does the site have to offer up some form of rss feed like yahoo does?
Or am I not going to be able to scrape sites that are generated using PHP
or ASP?

Thanks for any help,

Matt

Hi,

I've just finished the "Hello World" of scraping in a project and have a nice but pointless weather display on my touch panel to save me looking out of the window.

I decided to do something a bit more useful and get some local train times on there....

Thought this was a good place to start:



I don't seem to be getting back what I was expecting and wondered if I have misunderstood how this works.

My main question really is

Should I be able to do this?
or does the site have to offer up some form of rss feed like yahoo does?
Or am I not going to be able to scrape sites that are generated using PHP or ASP?

Thanks for any help,

Matt

To add to the *out of range values are ignored* statement. If your 8x8 switcher only had for example 7 input cards installed (8 is empty), and you tried to select input 8, it too would ignore input 8.

--- In Crestron@..., sebastian marszalek <s.marszalek11@> wrote:

I did see that, just wanted to ask the pros :)

--
Sebastian Marszalek


[Non-text portions of this message have been removed]

Hi!

Check this info about ex-link

Specially this!!!:

"As the TV uses 3.3V TTL levels, the serial input/output has to be converted to/from TTL levels to RS232 levels (~10-15V). Thus a level shifter is needed. But most computers today, doesn't have an RS232 port, so you also need a USB-to-RS232 serial adapter (cable). Thus its a definite advantage to buy a pre-fabricated USB-to-serial converter using 3.3 Volt TTL levels on the serial side. Common one to look for are based on the PL2303 and FTDI chips.
WARNING! RS232 levels are up to 15V, which can cause seriously damage at your TV!"

Regards,
Javier VM

--- In Crestron@..., "grumpy_cake" <crestron@> wrote:

Hi,

I hope someone can have some patience and spoon feed me through this as I have sat here for hours and have got nowhere. I am guessing a bit so please let me know if I am doing something stupid.

Firstly this may all be down to me using a module that may not work as I can't find my TV.

I have a: UE55ES7000
Closest I can find is the UN55ES8000

I've made up a cable for EX-LINK control using the diagram in the module pdf

(integrated_partner_modules/help_files/959/samsung_un55es8000_v1_0_help.pdf)

Tested cable with multi-meter, seems fine.

I have set the value of the RS232 mode to Debug.

Tried a basic test with the module set up like this:



I'm getting nothing in debugger on Samsung_Rx$ and the TV responds to nothing鈥�

Any help appreciated.

Thanks.

**



Just curious - what exactly runs off that voltage? Haven't seen that one
before...

- Chip

--- In Crestron@..., "on37j" <janusz.kalaczynski@...> wrote:

On current commercial project I am having one load 347V 5A to control

on/off, no dimming. Any recommendations please ?

In a 600 volt three phase Wye system 347V is the leg to neutral. It's similar to 277V in a 480V 3Ph Y system in the US.

--- In Crestron@..., "Chip" <cfm@> wrote:

Just curious - what exactly runs off that voltage? Haven't seen that one before...

- Chip


--- In Crestron@..., "on37j" <janusz.kalaczynski@> wrote:

On current commercial project I am having one load 347V 5A to control on/off, no dimming. Any recommendations please ?

I wrote an app for BlackBerry 10 using the API, very simple REST interface. You need to pass a cookie (or at least cookie headers) in the requests.

--- In Crestron@..., "jared_shapiro@" <shapirja@> wrote:

So i have a client that currently owns a Tesla Model S. Hes a tech junky and loves his iPhone app that controls his car. I thought it would be pretty cool if I could incorporate some of those controls into his touch panel. Anyone ever tried this?