¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Messages
Expanded Topics Messages Polls
Date
Re: Sony Bravia 9

 

On Sun, Sep 29, 2024 at 03:24 PM, <igor.pero.bauer@...> wrote:
AFAIK the commands are the same; maybe it's a power saving setting you've missed, which makes the unit go into deep sleep and you need to do Wake on LAN?
Like Igor said, It seems like a setting in the TV. Unfortunately Sony spreads the settings needed across 3-4 different sections in the setup menu.
Definitely seems like a wake on lan item...
intersystem controls - nest module

 

Hi all, does anyone know if it is avaiable to purchase a license for the google nest thermostat simpl/ch driver with the guys from intersystem controls?
I've tested the CH driver only, and it works for only 2 hour (as the instructions stated), but it is not clear how to get a proper paid license with them for using it without the time limit.
?
I've already sent a bunch of emails to them, without any success.
?
thanks all
nico
Re: Master Installer Error

 

It seems that there is something messed up with my Crestron account and there is a permission issue.

Thanks

On 9/29/2024 7:59 PM, jbasen via groups.io wrote:
Having a problem running Master Installer.? Getting the following error when trying to download and install the Crestron Database and Device Database:

Install Error (0x000000C1): %1 is not a valid Win32 application

I get the same error for both files.

I realize there are other ways of getting these files besides Master Installer but that is my preferred method.

Any ideas would be welcome.

Thanks

Jay
Master Installer Error

 

Having a problem running Master Installer.? Getting the following error when trying to download and install the Crestron Database and Device Database:

Install Error (0x000000C1): %1 is not a valid Win32 application

I get the same error for both files.

I realize there are other ways of getting these files besides Master Installer but that is my preferred method.

Any ideas would be welcome.

Thanks

Jay
Re: Sony Bravia 9

 

It¡¯s a K85XR90PU
Re: Sony Bravia 9

 

Is it? a L series


On Sun, Sep 29, 2024, 3:24 PM igor.pero.bauer via <igor.pero.bauer=[email protected]> wrote:
AFAIK the commands are the same; maybe it's a power saving setting you've missed, which makes the unit go into deep sleep and you need to do Wake on LAN?
Re: Sony Bravia 9

 

AFAIK the commands are the same; maybe it's a power saving setting you've missed, which makes the unit go into deep sleep and you need to do Wake on LAN?
Re: SimplWindows thinks a signal I deleted still exists

 

Thanks

On Sun, Sep 29, 2024 at 7:32?AM mikecm via <mikecm=[email protected]> wrote:
I have seen something similar in a user module which included a SIMPL+ module that I removed signals from which seemed to create an hidden orphaned signal in SIMPL. I noticed the +/- to expand the group was red instead of black. Selecting that +/- and hitting the delete key seemed to delete the orphaned signal and it was happy to compile afterwards.
Sony Bravia 9

 

I have just swapped out an AG9 with a Bravia 9 and have lost power on with the Simple IP control. ?All of the other control work having just changed the IP address of the TV.
?
is there a different power on command for the new units?
Re: Biamp Tesira VU Meters

 

We usually do "signal present" indicators...less traffic to the panel.
--
Josh Winn
The LiquidPixel Group
Re: SimplWindows thinks a signal I deleted still exists

 

I have seen something similar in a user module which included a SIMPL+ module that I removed signals from which seemed to create an hidden orphaned signal in SIMPL. I noticed the +/- to expand the group was red instead of black. Selecting that +/- and hitting the delete key seemed to delete the orphaned signal and it was happy to compile afterwards.
Re: UniFi adds Crestron Pro AV support

 

¿ªÔÆÌåÓý

Have you attempted to manually download the firmware to the switches?? If you are signed up for EA and enrolled, it should have prompted you to update the switches when it was released.? You can try to manually update and pull the firmware from the UI Support site.

?

Pat M

?

?

From: "[email protected]" <[email protected]> on behalf of "curt_cranfield via groups.io" <curt_cranfield@...>
Reply-To: "[email protected]" <[email protected]>
Date: Saturday, September 28, 2024 at 4:19?PM
To: "[email protected]" <[email protected]>
Subject: Re: [crestron] UniFi adds Crestron Pro AV support

?

Question, I have two USW Pro switches (24/48) neither of them are running EA 7.1 Firmware and neither of them see that as an upgrade.? I checked Unifi's site and they don't advertise that firmware either.? ?Can someone point me in the right direction on where to find it?

?

We literally just installed a Crestron system in our new house (still being built) and the Crestron fellow never told us that there are/were problems with Crestron and Unifi (I have been running Unifi for a number of years).? ?I set up the network side as that is my background and it took me a few hours to figure out that the two Crestron Amps were swamping the network.? ?So here I am - trying to figure it out :).

?

Any help would be greatly appreciaed.
Re: TSR-310 - Comcast Driver

 

Thanks EJ, that would be wonderful...
FTR, I have IP control working (I have seen a few glitches). My problem is that I can't get the VoiceReady_F output from the CCD module to go high, and this no voice control...
I reviewed my setup with TS and they said that it looked like all the settings, Auth, etc. looked correct...
I thought that maybe there was some other special setting in the Xi6 was needed but haven't found any info on that...
And yes, the comcast remote does do voice control so it is activated in the box....
Re: UniFi adds Crestron Pro AV support

 

Thanks.
?
I actually got the .bin from the Early release website and also found unifi's - UniFi Switch - Pro AV document which outlines all the other setting that required.? ?It was reasonably straight forward as the home Automation stuff (Creston) was already put on it's own VLAN.
?
So now we wait and see how/if it all plays nice together :).
?
C
Re: UniFi adds Crestron Pro AV support

 

¿ªÔÆÌåÓý

If those amps are NAX amps you will need to double check all the igmp and nvx config settings on the switches. You can find information on Crestron site for that

nf

?

From: [email protected] <[email protected]> On Behalf Of curt_cranfield via groups.io
Sent: s¨¢bado, 28 de septiembre de 2024 01:06 p. m.
To: [email protected]
Subject: Re: [crestron] UniFi adds Crestron Pro AV support

?

Question, I have two USW Pro switches (24/48) neither of them are running EA 7.1 Firmware and neither of them see that as an upgrade.? I checked Unifi's site and they don't advertise that firmware either.? ?Can someone point me in the right direction on where to find it?

?

We literally just installed a Crestron system in our new house (still being built) and the Crestron fellow never told us that there are/were problems with Crestron and Unifi (I have been running Unifi for a number of years).? ?I set up the network side as that is my background and it took me a few hours to figure out that the two Crestron Amps were swamping the network.? ?So here I am - trying to figure it out :).

?

Any help would be greatly appreciaed.
Re: UniFi adds Crestron Pro AV support

 

Question, I have two USW Pro switches (24/48) neither of them are running EA 7.1 Firmware and neither of them see that as an upgrade.? I checked Unifi's site and they don't advertise that firmware either.? ?Can someone point me in the right direction on where to find it?
?
We literally just installed a Crestron system in our new house (still being built) and the Crestron fellow never told us that there are/were problems with Crestron and Unifi (I have been running Unifi for a number of years).? ?I set up the network side as that is my background and it took me a few hours to figure out that the two Crestron Amps were swamping the network.? ?So here I am - trying to figure it out :).
?
Any help would be greatly appreciaed.
Re: TSR-310 - Comcast Driver

 

I have done this about half a dozen times. I had problems with the demo program and just did it my way. IMO the hardest part is trying to advice the tech how to get into the secret menu of the cable box to enable IP control.
It's like a nintendo cheat code lol. My first go at one was on a CP3 and IP control had some issues like run away channels that would never stop. Not sure if this happens on a 4-series processor. On every project I'm using IR for control and IP for voice control and it's been solid with no issues. When I get back in town I can send you a example program from one of my projects as a reference if you haven't figured it out by then. Just let me know.
?
Biamp Tesira VU Meters

 

Hi Group,
?
I integrated my first Biamp Tesira and all is working. My question is can you do vu meters in VTPro? With the Crestron DSP you can import a file into VTPro to get a vu meter on the touch panel. Any info would be greatly appreciated.
?
Thanks in advance!
Re: SimplWindows thinks a signal I deleted still exists

 

Thanks Chad

On Sat, Sep 28, 2024 at 10:05?AM chad via <chad=[email protected]> wrote:
Ive had a corrupt module not update like that before.... I've actually had a Processor Hardware Definition get corrupted like that as well, necessitating a rebuild from the ground up... I want to say that was on a system that was setup a decade ago and a more recent database update didn't go so hot.?
?
Super rare. Glad you got it fixed.?
Re: SimplWindows thinks a signal I deleted still exists

 

Ive had a corrupt module not update like that before.... I've actually had a Processor Hardware Definition get corrupted like that as well, necessitating a rebuild from the ground up... I want to say that was on a system that was setup a decade ago and a more recent database update didn't go so hot.?
?
Super rare. Glad you got it fixed.?
1941 - 1960 of 256477