Also all,
What ISP?? and are you using static addressing? if so, what are your DNS addresses?

On Tue, Jul 2, 2024 at 01:49 PM, XSDS wrote:

Yep.? Clients are just asking for the controls to be removed.? We are just not including it moving forward, reliability is a must in this industry.

Hey XSDS,
What part of the country are you located in? I'm in the Northeast and I know that Tony G is in Georgia (last I checked!)

My Crestron TS guy is in central California and is not seeing an issue with his test rig either...
So Frustrating!!...

That is so freaky!!...:(

Good. Thank you

I will test it and see if it works

开云体育

Here is the 1.5 version.? I don't remember who I made that for. ? They must not have gotten back to me on whether it solved their issue so it never was posted to GitHub.

Here is a link so you can download it.

Hope this works for you.

Thanks

Jay

Jay, thanks for your quick reply.

I saw in some other topic that there was v1_5 of this module. Am I right?

In this link sent, there is v1_4
Do you think I can use this version 1_4 or would it be better to use v1_5? (if this version actually exists)

开云体育

You might be able to control the Sensibo Sky using the module I wrote for the Sensibo Air.? In any case the full source code is included so you could modify it to accommodate and differences you run into between the two Sensibo products.

Hope this helps

Jay

开云体育

Does anyone know or have a Simpl Windows module for SENSIBO SKY?

I'm currently at a site with several TSW-1070s, and the Weather Widget and Smart Object works on all of them.

Still more sites complaining about failed Weather App function...? All TSWs don't work (x52, x60, x70) but the Crestron App/GO still work.
Could the TSWs use a different server for Weather Info???? ?its weird to me that just the panels just all stopped about 1.5-2 weeks ago...

Mmmm... we didn't need that for the VMS4100 and IPC4100 units

Set the Analog values (VideoOut-x and AudioOut-x) for the route you want - 0d to 8d - 0d is no route, 1-8d is inputs 1-8
Use an AOS on the analogs to trigger the VideoEnter and AudioEnter to send (Take) the routes. that's it...

Assuming you don't need to separate video and audio, and thus AudioBreakAway is low or undefined, all you need to do is have the VideoOut analogs set, the audio will naturally follow.
Use (2) AOS's and OR their outputs into the VideoEnter

HTH

So I was just looking to see if they fixed this and I found they finally released an IR receiver for these boxes.?

Thanks Eric!
I reached out to them to see if they have anything for SMW. I think I've reached out to them before about other items and they're just HOME developers, but we'll see...

I'm hoping to use one of these in my sons apartment but having a little trouble wrapping my brain around setting it up.? First question is, is there any benefit to connecting via Ethernet over cresnet?? If I use cresnet, i only need a 10 inch long cable direct to the processor.? There will only be 4 sources accessed by 2 TV's. (Living room and bed room). I don't need audio breakaway.? I'm missing something here.? Looking at it in program mode, I'm not seeing what initiates the input and which output you want to send it to.

We've had a big issue with ghost presses and unresponsive areas of the screen on our x70 series panels. It seems to be caused by our custodians using cleaning products on the panels. The panels will start freaking out and the only way to fix them is a power cycle. Crestron's response was to only clean them with water which makes sense but that's hard to control with hundreds of panels out there.

Doesn't fully help, but there is an extension available from CPLLC.net for Crestron home.?? perhaps, they may be able to help???

Is anyone having issues with the new x70 series like edge light bleeding and calibration issues???

I have 8 touch screens but unfortunately one of them is acting weird, the lower part of the screen doesn't respond to touch and it makes the keyboard unusable.?

There is no option to calibrate the panel as far as I can tell. Tried initialize, FW update and hard reset but nothing seems to work.?

Below is a demonstration :?

Wasn't that the 'AnyDVD' OS?