you have to create a user and then use that login on the app settings

OK, just noticed the same settings are greyed out on the RMC3 but that connects using the same program.

Is there something in the CP3 that blocks the connection from the Crestron App/Go?? Authentication is off.

I cannot get iPads to connect to a CP3.

In Ethernet Addressing CTP and SCTP are empty and the option to enable them is greyed out.

In CIP the port entries are included but enable is greyed out.

I cannot see how to reenable the ports.? ?I have tried resetting the CP3.

Any thoughts or is the ethernet card done for?

Have not found any way to perform a hard factory reset for the Sharp EQ1 series displays. From all of my readings - I may be able to reset the password for the web browser by resetting the Network defaults within the Menu. While not 100% sure - then the user ID/ password for admin rights would be: dispadmin / @Panasonic ?

The rumor is they are coming out with an updated API and a module that will work with the Media Player App

A factory reset of the monitor to set its credentials to default? Then you will be able to access its web interface.

Jason Mussetter, I really appreciate your suggestion to use Hercules. That program is pretty stunning. I was able to send the hex commands and it didn't append any additional characters. I also was able to strip down my program a bit just to remove any other moving parts. It's possible I added a carriage return without realizing it by hitting the enter key when putting hex codes into the prompt in debug. So, likely just user error, which undoubtedly many of you suspected :)

Slip Cougan, I've downloaded that ex-link module and I'll explore it more. It seems very powerful and could likely simplify the whole project.?

I appreciate everyone's input and help moving me forward. I've made considerable progress because of all the helpful info you've all provided. I deeply appreciate the support. This stuff isn't straightforward, but I can see how it all comes together.

开云体育

Issue is I can not access the Sharps web server to confirm any of the parameters? None of the ID/Passwords in the docs / Internet have not worked?

IPID is set correctly on the display for RoomView Connected control? With the IPID converted to decimal instead of hex?
--
Josh Winn
The LiquidPixel Group

Hello all,

I posted this in the facebook group but figured I'd try here as well.? ?I have 3 new Ipads 9s installed running the CH app in Guided access "kiosk mode".? After a few hours or less, they lose their connected to the system.? Minimizing the app and reopening fixes it.? ?I tried connecting via Hostname, IP, and cloud.? Same result? ?Ipads and Iphones that aren't permanently installed work fine.? I setup an ipad via cloud at my house and it stays connected all day.? ?Network in the house is unifi.

Any suggestions?? ?Running out of things to try.? ?TB heard something about it, but didn't have an immediate suggestion.

Thanks!
Philip

On Thu, Mar 14, 2024 at 06:51 PM, Hanfm0n wrote:

the drive states which models work with voice.

Where did you find this info? Have you found a help file? the demo program that I just downloaded didn't have any PDFs in the Zip...
The only module in the file is the (crap) CCD TV Tuner Ethernet v2.2 (cm) whose help file is generic (unless I missed something)

TIA!

Looking forward to the dets.

Xi6 and XG1v4 - the drive states which models work with voice.

What box model(s) do we need to use??
TIA!

Was called into a Library to fix a room system that was installed by others a few years ago. All of the 5 rooms have Sharp EQ1 series display (TH-65EQ1U) with 4 working fine. All were setup using Crestron Connect and the Crestron RoomView Connected Display module. It looked like the room may have never been setup - the DM Receiver had the HDMI cable coming out of the Input side going to the display and the I address of the unit was set to a static IP address, but was not on the proper LAN segment. Corrected those issues but no control from the MPC3-201. Since the IP table shows that the display off line - I assume that the displays Crestron Connect web page is not properly configured. Crestron Connect is On in the display menu and I have tried every user ID / password combination that I could find on-line to access the web server of the display, but have been unable to access it? Any thought? Thanks!

开云体育

Do I need any adapter to control via IR?

Thanks.? Is the unit they installed the dongle looking thing and it has IR then?

Thanks Jeremy.

I suspected that as well, the Chromium build on these TPs are years old. Which in the Android world doesn't necessarily mean it's a problem, but that doesn't account for TB having it work in their environment.