Xi6 and XG1v4 - the drive states which models work with voice.

What box model(s) do we need to use??
TIA!

Was called into a Library to fix a room system that was installed by others a few years ago. All of the 5 rooms have Sharp EQ1 series display (TH-65EQ1U) with 4 working fine. All were setup using Crestron Connect and the Crestron RoomView Connected Display module. It looked like the room may have never been setup - the DM Receiver had the HDMI cable coming out of the Input side going to the display and the I address of the unit was set to a static IP address, but was not on the proper LAN segment. Corrected those issues but no control from the MPC3-201. Since the IP table shows that the display off line - I assume that the displays Crestron Connect web page is not properly configured. Crestron Connect is On in the display menu and I have tried every user ID / password combination that I could find on-line to access the web server of the display, but have been unable to access it? Any thought? Thanks!

开云体育

Do I need any adapter to control via IR?

Thanks.? Is the unit they installed the dongle looking thing and it has IR then?

Thanks Jeremy.

I suspected that as well, the Chromium build on these TPs are years old. Which in the Android world doesn't necessarily mean it's a problem, but that doesn't account for TB having it work in their environment.

I have new boxes coming.? I will update the thread with my experience, once I have it implemented.??

The following files and folders have been uploaded to the Files area of the [email protected] group.

• /Armstrong Google Tivo.ir

By: Greg Calvimontes <gregc@...>

Description:
Armstrong Cable Android Tivo IR Files

I have a few PRO versions out there.? No control options that I have found, other then the app.? The app is clean and works well with iPhone.? I've put them into legacy systems as replacements for Escient and legacy music servers.? Definitely a good option vs Sonos for $ and operation.? Had a client install as option for guest to Airplay/Cast into there systems.

I have just finished a project with this combo. The ir codes are learned from the remote, and the cable company is Armstrong in W PA. Will upload files in 5.
There are no transport buttons, as you need to hit menu, then use the L/R buttons to chose the action.

Don’t define the userproginitcomplete signal in your program. Essentially there’s a timeout that I believe is 20 minutes. If the affected program doesn’t “see” the programs’ init flag it goes into a timeout wait period. Just remove the signal in your program, because if something happens at program start you’ll have to wait for the timeout to expire before anything can move on.

Short story is that the local cable company had cable boxes running Tivo software.? Everything was the same and I could control via IP.? Fast forward to this week.? The cable company forced a replacement of the boxes and the new boxes are android based running Tivo.? Anyone seen these and know if there is a way to control via IP or IR?? I havn't put eyes on it yet.

开云体育

The NIKO stuff you find on Crestron Website is more or less only switches/outlets etc because these were compatible with the CLWI devices from Crestron.?

If its the Niko Home Control II yout customer is haveing there seems to be an integrator and a hobby API you could use:?
Both of them seem to be based on MQTT where you can find some Crestron modules for on Github, eg:?



I must note that I don't have any experience with these modules.?

Hello Thorsten,
As far as i know there is no possibility of integrating NHC with Crestron, I've had direct contact with Niko about this.
If you do find a way to connect the 2 systems I would be very interested in knowing how.

Good luck,
Philippe

Last though, could it be due to the fact that most of the symbols are commented out in Scheduler as I am testing it? and only need the events firing for now and none of the adjustment parameters.

I have now done the following:

OK, so trying to make this work I have:

Created a new folder in the \NVRAM folder named Main using Fliezilla and transferred the Lighting.txt? text file to that folder.

Changed program tag to Main in the program, saved and recompiled.

Used?&#92;&#92;NVRAM&#92;&#92;Lighting.txt in the Serial Send and set using 1 and also manually in Debugger.

Toggled The Scheduler On and Off using panel.

It still looks like the events are not firing.