Re: Savant 2N with Crestron
I have put the 2n firmware on the C4 ones. They are still missing Rava. Using a SIP server worked for what I needed.
|
Re: Samsung CCD IP Control not powering back on.
I send a WOL packet using C# bypassing the power on command in the CCD driver.? It turns the TV on and then the Samsung CCD will connect and control.? Actually works good this way.? I had the same problems with the CCD using C#.
|
|
|
This isn't something that bothers me but for those that want to
create a perfect copy of the standard ELK keypad in crestron I
believe, if memory serves me correctly, that there are a few
things you can't implement in a way that exactly matches the
keypad.? For example, I don't believe the chime and bypass keys
are included in the modules but they exist on the keypads.? I also
don't think the * and # keys on the keypad have equivalents in the
modules.?
There is certainly the ability to bypass zones in the modules but
it is implemented differently on a keypad.?
So, I believe the functionality you need is all included in the
modules.? But if you are trying for perfect emulation of a keypad
it isn't quite the same.
Jay
On 1/24/2024 7:59 AM, ckangis wrote:
toggle quoted message
Show quoted text
OLD modules are DEFINITELY BETTER!!!...:)? ?(and not just because
I'm old!!)
It's good to hear that ELK is still a good option...? What issue
have you had with KPD emulation?
|
Anyone out there controlling ST 2110 Nmos routing from a crestron processor?
Josh
|
Re: weather conditions trigger
Snowing No, Raining Yes.? The rain sensor on the tempest is
haptic so it can't detect the sound of snow hitting it.? The only
snow sensors I'm aware of are those that are sold with
driveway/pathway ice melt systems.? They consist of a moisture
sensor and a heating element.? The heating element melts the snow
and the moisture sensor can then detect it.? You need to couple
this with an outdoor temperature sensor to differentiate whether
the moisture detected is from rain or snow.
Hope this helps
Jay
On 1/24/2024 1:43 PM, ckangis wrote:
toggle quoted message
Show quoted text
Jay, Does the WF unit/modules give local weather triggering, like
'its snowing'??
Also, does it provide any predictive info??? (I'm thinking not on
this one...)
|
Re: Savant 2N with Crestron
Has anyone actually tried it ie getting the firmware link off the 2n website and uploading it to the hardware ?
I came across the Control4 variant recently. I too was told by Axis support that you cannot reflash it to get back to the "standard" version which includes the Crestron RAVA stuff. I don't believe there's any special "Crestron" version. OP
|
Re: weather conditions trigger
Jay, Does the WF unit/modules give local weather triggering, like 'its snowing'??
Also, does it provide any predictive info??? (I'm thinking not on this one...)
|
Re: Savant 2N with Crestron
I came across the Control4 variant recently. I too was told by Axis support that you cannot reflash it to get back to the "standard" version which includes the Crestron RAVA stuff. I don't believe there's any special "Crestron" version. OP
|
i have the same problem, the IP-TABLE erase after device reboot
|
Re: weather conditions trigger
If you want hyper local weather conditions l highly recommend the weatherflow tempest smart weather system. There are free modules on my GitHub?
Hope this helps?
Jay
[Edited Message Follows]
Use the Creston Weather module, in the touchpanel interface module, either use the text string out or the current icon mode out to drive your logic.?
Crestron Weather Module
|
Re: weather conditions trigger
Use the Creston Weather module, in the touchpanel interface module, either use the text string out or the current icon mode out to drive your logic.?
Crestron Weather Module
https://support.crestron.com/ci/fattach/get/3620848/0/filename/Crestron+Weather+Application+Replacement+for+TSW-750+v2.0.0.zip
|
weather conditions trigger
I have a client that wants to trigger roof heaters based on weather conditions.? Basically, if it is snowing.? I'm not necessarily looking for a free handout, but am curious if someone has done this and can point me in the direction of how you did it.
Thanks!
|
OLD modules are DEFINITELY BETTER!!!...:)? ?(and not just because I'm old!!)
It's good to hear that ELK is still a good option...? What issue have you had with KPD emulation?
|
Re: Xpanel web conversion tool
Load the SG XPanel Web project to the processor from VTProE or Toolbox first.
This will issue the , WEBINIT cmds behind the scenes.
This informs the 4Ser that a user project is loaded and to handle URL redirects appropriately.
Then run with Source & Destination both set to Control System.
(While you can run XCT with Source=Local, Destination=ControlSystem there are undocumented steps needed to make that work. At the end of the day it's just easier to follow the workflow I described above.)
|
That's good news, assuming the new modules are at least as robust as the old ones - and they're not "Crestron Home only" :-)
toggle quoted message
Show quoted text
--- On Wednesday, January 24, 2024 at 9:06 AM, Jason LeMay wrote:
Just spoke with Elk last week about the new EZ panel/system. They are actively
working on integration modules and they should be released right around the
time the panel ships.
On Jan 24, 2024, at 8:40?AM, johnh wrote: ?>
CK I was recently evaluating an Elk M1 Gold as a replacement for our
security installs. Once I got past the few initial hurdles integrating
it with Crestron it seemed to work flawlwssly for me. Yea the modules
are as old as dirt, but sometimes its better that way- simple and it
works. The new EZ alarm panel theres no integration for it yet that
I know of.
|
Re: Savant 2N with Crestron
Well, they are restricted - that?s the reason why they are cheaper. You get what you pay for. ? Cheers, Thorsten ? ? ? Not possible. We had this same situation this past year as our sales guys ordered them thru Savant because they were a bit cheaper. Well after many calls with tech support I was told you cannot flash them to the Crestron firmware they are stuck on Savant. Of course it seems like BS as we all know it really shoulld be possible, but support says they dont offer a way to do it.?
|
My programmer Gary Miller is more familiar with the issue. He should see this and respond.?
|
Just spoke with Elk last week about the new EZ panel/system. They are actively working on integration modules and they should be released right around the time the panel ships.?
toggle quoted message
Show quoted text
On Jan 24, 2024, at 8:40?AM, johnh via groups.io <johnh@...> wrote:
?CK I was recently evaluating an Elk M1 Gold as a replacement for our security installs. Once I got past the few initial hurdles integrating it with Crestron it seemed to work flawlwssly for me. Yea the modules are as old as dirt, but sometimes its better that way- simple and it works.? The new EZ alarm panel theres no integration for it yet that I know of.?
|
CK I was recently evaluating an Elk M1 Gold as a replacement for our security installs. Once I got past the few initial hurdles integrating it with Crestron it seemed to work flawlwssly for me. Yea the modules are as old as dirt, but sometimes its better that way- simple and it works.? The new EZ alarm panel theres no integration for it yet that I know of.?
|
Gumppy66
Dave H - Crestron True Blue Tech Support Engineer Since 2014