I agree with Tony. I always have a separate IP-ID for each program that is communicating with the GW.
Thus I would do this, whether in the same of different processors:

CEN-GWEXER: I
P-ID 03 -> CP3 IP Address
P-ID 04 -> CP3 IP Address

CP3 Program 1(AV): IP-ID 03 CEN-GWEXER (Shared)
CP3 Program 2(D3): IP-ID 04 CEN-GWEXER (Shared)

Even if the alternative method works, I still wouldn't use it because:
a. I don't trust it, and it frankly *shouldn't* work without issues IMHO
b. its harder to trouble-shoot things. with 2+ IP-IDs, you know in the GWEXER's IPTable, whether each program is on-line. this has been helpful. If you have just one IP-ID, which program is Online?? one, the other or both??

The "correct" method is for each program, whether on the same processor or not,
to have a unique IP ID.

--- On Wednesday, August 9, 2023 at 10:26 AM, Doug Greenhalgh wrote:

Thank you, TB was adamant that it had to be the other way, thought I was

losing

my mind.

--- On Wednesday, August 9, 2023 at 8:22 AM, Mitch Bigelow wrote:

You could probably do it both ways, but one ip table works when you're using
one processor. Here's how I have a system set up on a CP3:

CEN-GWEXER: IP-ID 03 -> CP3 IP Address

CP3 Program 1(AV): IP-ID 03 CEN-GWEXER (Shared)
CP3 Program 2(D3): IP-ID 03 CEN-GWEXER (Shared)

开云体育

Can anyone confirm proper procedure for shared gateways, i have a CP4 running an AV program in slot 1, D3 program in slot 2, i have the ipid set to 3 and 4 in both programs. Just got off the phone with TB and they are saying they definitely need to be different with multiple ip table entries on the gateway.
Is this correct? i thought that was the case when you had shared gateways between multiple processors

Thanks for the update!! Always appreciate a heads-up on these things!!

Just wanted to give this one a quick bump as we had to deal with these this week.? We ran into a bug during install on the module v1.1 which displayed this error sporadically when changing setpoints:

[ The setpoint requested violate the deadband set by the user. ]

Contacted the module creators (ControlConcepts) and Jen was quick to send us the hotfix clz file to correct it and all appears to working properly now.? She mentioned they will be updating the app market module, but until that point, I would reach out to them to get the hotfix if you run into this issue.? Thanks again Jen!

On Mon, Aug 7, 2023 at 11:42 AM, XSDS wrote:

Anything with tokens and updating is always a PITA these days.

You can say that again!...

On Sat, Aug 5, 2023 at 11:48 AM, ckangis wrote:

On Fri, Aug 4, 2023 at 10:47 AM, Pat Molettieri wrote:

Intersystems Control in Canada has a Simpl module.?

I'll give them a plug also. Great guys who provide good support for their modules...

Thirded.? They have provided great support for all their modules.? There is a little front end work you need to do to get this particular module working tip top, but the back end of the module works great.? Anything with tokens and updating is always a PITA these days.

Not sure why they don't work simultaneously but I'm suspecting it has to do with the C1M1 occupying the serial port. We were even on the phone with Elk tech support and it was never mentioned as something that might cause an issue. The security guys were giving up and disconnecting when all of a sudden things started working. I did the ol' "wait.... what'd you? just do???"?

On Mon, Aug 7, 2023 at 08:57 AM, @johnmax wrote:

How could they not make them both work at the same time...

That's a rhetorical question, right?...:)

That got me too as we are new to Elk and evaluating the product. How could they not make them both work at the same time...

On Fri, Aug 4, 2023 at 10:47 AM, Pat Molettieri wrote:

Intersystems Control in Canada has a Simpl module.?

I'll give them a plug also. Great guys who provide good support for their modules...

开云体育

I would also throw out that I believe there are other advantages to using a notification service, like PushOver.? Living in the west, we use the Do Not Disturb setting on our phones to keep from being woken up by group texts from friends on the east coast who don't think about the fact that someone on the list is several time zones away when they send an early morning text.?? PushOver, and some of the other notification services, allow you to prioritize the notifications your processor sends with different priorities.? So, some can have a low priority that obeys the do not disturb setting but others can have a high priority that includes a sound even in the middle of the night.?

Finally, PushOver and Vybit include the ability to use different sounds for different notifications.? My wife and I do a great deal of mountain biking during the summer.? I send out notifications through PushOver whenever our WeatherFlow Tempest weather station detects lightning.? These have a custom sound so we don't have to look at our phone while riding to know that there is a thunderstorm approaching and it is time to head home.?

Hope this helps

Jay

The problem with using the email to text gateways from the cell phone providers is they have recently started putting all kinds of antispam filters on the gateways that block any sort of suspicious messages and you can't count on them working all the time. I'd been sending texts from my Crestron system for years through those email gateways but they just got too unreliable so I looked for another way. My alternative is to have an old Android phone on a $8/month account with US Cellular. Using an Android program called Automagic I can send a simple HTTP Get request from the Crestron system to that phone and it will trigger an event that sends me texts on the cellular network directly. This has been working well for a while, though it's a total cludge.

I would also send those same messages via email at the same time, but that got snarky as the email providers put up stronger measures to stop the spammers from using their SMTP networks. The Cestron emails don't seem to have all the authentication data that Comcast, Gmail and others want to see to accept and send emails. I set up a free Sendgrid SMTP account and that's been working well for a long time.

They figured it out.... Apparently you can't use the security RP software AND Crestron control at the same time.

I have an Elk M1G that I'm trying to control IP in SIMPL through a C1M1 module. I am getting all proper feedback and status updates but for some reason I can't arm/disarm. I'm working with the security contractor and they've set the G29-G42 sections to checked for keypad, zones and output changes. I don't know of any other setup or configuration that's required. Anybody have any advice or recommendations on what I might try?

I figured it out. Just had to use the module for GainMute control and name appropriately. Default names of the demo program mixed me up.

I am using the Clearone ConvergePro2 v1.2 IP demo project to control a ClearOne Converge Pro2 128VT.

I have control of the unit but I am unclear on how to control the "ProcBloc" entities which were configured by the DSP contractor.?

Control of the MicLine in and Outs works fine. If anyone can point me in the right direction that would be helpful. Thanks.

开云体育

开云体育