Hi Jay, ? the client purchased a Sensibo device (Air) and is successfully controlling his IR-AC using the Sensibo app. I?ve also successfully integrated the Sensibo Air into the Crestron program running at the client?s CP4. Your module reports a successful connection and i?m receiving feedback (e.g. target temperature). I?m able to control the AC, setting it into cooling mode and off mode. However, after sending just a few (three) commands, the whole program shuts down and a reboot is required. In the console window, it say Program 1 stopping¡ ? Any ideas what the issue might be here? ? Thanks, Thorsten ? ? ? ? Hi Thorsten, Sensibo and Ambi Climate have products that will control an AC unit.? A few years ago I wrote drivers for them.? I haven't touched them since but I believe they are both still workable drivers.? Also, I just saw an announcement that Sensibo has added some interesting new features to their product.? Hope this helps Jay
toggle quoted message
Show quoted text
On 6/13/2023 11:37 AM, Thorsten K?hler wrote:Hi Jason, ? main driver is actually the Netatmo ¡°Smart AC Controller¡±. The client has an AC unit that i?m having issues getting into Crestron as it is remote controlled by a specific remote control unit (with display). The client came across the Netatmo device and had the idea to use that as some sort of gateway between Crestron and the AC unit. ? But for that, I need to able to communicate with Netatmo in the first place. Doesn?t sound if there?s something readily available¡ ? Thanks, Thorsten ? ? ? I looked at writing a Netatmo integration driver a few years ago.? They use full OAUTH2 authentication protocol which makes integration with a Crestron processor problematic.? If you are looking for a weather station to integrate with I would highly recommend the WeatherFlow Tempest.? Very well designed weather station and I have just made some significant updates to the free driver on my GitHub.?
Hope this helps Jay On 6/12/2023 11:03 AM, Thorsten K?hler wrote: Hi, ? anyone already doing integration of the Netatmo system into Crestron? ? Thanks, Thorsten
|
Yes, for whatever reason Crestron never created the SSP class for the C2N-DB12. The CNX seems to work fine.
|
It¡¯s still there.
?
Caleb Radecky |
Manager, Online Products & Services
Crestron Silver Certified Programmer | DMC-D-4K | DMC-E-4K
ControlWorks Consulting, LLC | Crestron Services Provider | 8228 Mayfield Rd. #6B Rear Cleveland OH 44026
D. 440.771.4809 | O.440.449.1100 X1109 | F.440.449.1106 |
?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of
MSTC
Sent: Thursday, July 13, 2023 18:03
To: [email protected]
Subject: Re: [crestron] Recover programs
?
What ever happened to Spin-Rite . . . .
?
I'm not sure what you mean by an accident.? Did you delete them, or did you run the drive over with a car?? There are free undelete programs out there and other services.? Is this a mechanical drive that won't spin up?? Put it in the freezer
for a few hours, I've done that many times and recovered gigabytes of data.? There are lots of methods, depending on the scenario.? Recuva and PhotoRec are good tools.? PhotoRec will work on corrupted drives.??
|
What ever happened to Spin-Rite . . . . ? I'm not sure what you mean by an accident.? Did you delete them, or did you run the drive over with a car?? There are free undelete programs out there and other services.? Is this a mechanical drive that won't spin up?? Put it in the freezer for a few hours, I've done that many times and recovered gigabytes of data.? There are lots of methods, depending on the scenario.? Recuva and PhotoRec are good tools.? PhotoRec will work on corrupted drives.??
|
Re: iPhone 13, VPN and Crestron GO app
You might want to check what type of Encryption you are using for your VPN.?
When I updated the OS on my laptop, all my VPNs stopped working.? Turns out the newer OS's will no longer allow AES256-CBC. You can add some lines to your .ovpn file to allow the older AES256-CBC encryption.? But the better method is to use AES256-GCM encryption -- that is what newer OS's want to see.
|
Does anyone have the URL for the Hunter Douglas Powerview shade app to be called up from the Crestron Go APP?
Thanks
|
Re: Epson Projector Crestron Connected
Thanks to everyone for your suggestions.?
I tried all of them with no success. Even Epson tech support was stumped.?
I ended up switching to PJLink and they connected up right away.
|
iPhone 13, VPN and Crestron GO app
Hi All,
I have a client with the GO app and a VPN for use when he is away from the house. With his iPhone 11 (10?) everything worked fine.
Now that he updated to the 13, the GO app does not even negotiate with the processor.
He has a couple other Apps (Camera and irrigation) and both of those work thru the VPN so we know that the connectivity is working.
It would seem that it is something specifically between the new iPhone 13 and the Crestron GO app.
We tried turning off 'Private WiFi Address' in the iOS setting but that didn't seem to help...
The GO app does work locally and we don't have an 'Address 2' set up in the app. he just uses the local connection whether at home or thru the VPN.
Anyone have any ideas??
TIA!!
|
Re: Factory Defaut TS-1070
Got it to work. Pull POE, wait for Crestron logo with scrolling dots (3rd screen in boot up for me). Once saw this screen pulled POE and reapplied. Same sequence 10 more times for total of 11. Confusing part was I had to let it go past the scrolling dot screen after 11th reboot. I suspected the first screen would be factory restore but it was not.
|
Re: Factory Defaut TS-1070
Do I need to wait for the Crestron logo that has the "dots" or can I reset on the first logo I see? I did this for almost 15 minutes yesterday before just giving up. Possibly the biggest waste of time on a touch panel ever, and that's saying something.
|
Re: Factory Defaut TS-1070
It could be like Extron too, one is a reboot, two is clear project, three is whatever.? Do a press and then click five times for factory reset or something like that.? It's pretty stupid the way it is now.
|
Re: Factory Defaut TS-1070
Just did this yesterday with a tech.? Press the reset button in the pin hole on the back until the screen goes black, release.? Once you see a Crestron logo on boot, repeat 10 more times for 11 total.? Wait for it to boot and it will go into a recovery screen with a button to factory reset.? It took him a couple of tries to get it right.? Note to Crestron, this is absurdly complicated.? A 30 second hold on the reset button like every other device made is adequate.??
|
I'm not sure what you mean by an accident.? Did you delete them, or did you run the drive over with a car?? There are free undelete programs out there and other services.? Is this a mechanical drive that won't spin up?? Put it in the freezer for a few hours, I've done that many times and recovered gigabytes of data.? There are lots of methods, depending on the scenario.? Recuva and PhotoRec are good tools.? PhotoRec will work on corrupted drives.??
|
Re: CTI-P201 Entrance Exam part 1
*..if they are wrong in the first try.¡± NFH
toggle quoted message
Show quoted text
On 12 Jul 2023, at 13:59, nicofreda via groups.io <cdandcontrol@...> wrote:
? With p301 you have just a second chance to send corrections if they are on the first try. If that second try is not good, you need to wait 3 months to retake it. Not sure if its the same with 201, but I would asume that.? Nico NFH On 12 Jul 2023, at 13:47, Robert Shackelford <rshackelford76@...> wrote:
? I believe you get 2 tries to take it. Then you have to contact them to take it again. At least that's the way it was years ago when I took it. Hi there, this is my first post here.? I took CTI-P101 almost a year ago but only in the last couple of months or so have I had extended periods of time to look at and modify programs, and I think I'm starting to get the hang of this.? I was looking into the 201 course, but it looks like the first step is a 1 hour multiple choice exam.? I was thinking of taking it just to see if I'm anywhere near ready, but are there some sort of parameters to it?? Like if you take it once you have to wait X days to try again, or does it reflect poorly on you if you take it and get a terrible score?? I'm just curious what happens after you click "Begin Exam".? I'm not looking for answers, but details on the process.
Thanks.
|
Re: CTI-P201 Entrance Exam part 1
With p301 you have just a second chance to send corrections if they are on the first try. If that second try is not good, you need to wait 3 months to retake it. Not sure if its the same with 201, but I would asume that.?
toggle quoted message
Show quoted text
On 12 Jul 2023, at 13:47, Robert Shackelford <rshackelford76@...> wrote:
? I believe you get 2 tries to take it. Then you have to contact them to take it again. At least that's the way it was years ago when I took it. Hi there, this is my first post here.? I took CTI-P101 almost a year ago but only in the last couple of months or so have I had extended periods of time to look at and modify programs, and I think I'm starting to get the hang of this.? I was looking into the 201 course, but it looks like the first step is a 1 hour multiple choice exam.? I was thinking of taking it just to see if I'm anywhere near ready, but are there some sort of parameters to it?? Like if you take it once you have to wait X days to try again, or does it reflect poorly on you if you take it and get a terrible score?? I'm just curious what happens after you click "Begin Exam".? I'm not looking for answers, but details on the process.
Thanks.
|
Re: CTI-P201 Entrance Exam part 1
I believe you get 2 tries to take it. Then you have to contact them to take it again. At least that's the way it was years ago when I took it.
Hi there, this is my first post here.? I took CTI-P101 almost a year ago but only in the last couple of months or so have I had extended periods of time to look at and modify programs, and I think I'm starting to get the hang of this.? I was looking into the 201 course, but it looks like the first step is a 1 hour multiple choice exam.? I was thinking of taking it just to see if I'm anywhere near ready, but are there some sort of parameters to it?? Like if you take it once you have to wait X days to try again, or does it reflect poorly on you if you take it and get a terrible score?? I'm just curious what happens after you click "Begin Exam".? I'm not looking for answers, but details on the process.
Thanks.
|
CTI-P201 Entrance Exam part 1
Hi there, this is my first post here.? I took CTI-P101 almost a year ago but only in the last couple of months or so have I had extended periods of time to look at and modify programs, and I think I'm starting to get the hang of this.? I was looking into the 201 course, but it looks like the first step is a 1 hour multiple choice exam.? I was thinking of taking it just to see if I'm anywhere near ready, but are there some sort of parameters to it?? Like if you take it once you have to wait X days to try again, or does it reflect poorly on you if you take it and get a terrible score?? I'm just curious what happens after you click "Begin Exam".? I'm not looking for answers, but details on the process.
Thanks.
|
Re: Factory Defaut TS-1070
Found it at?Answer ID:?1001577, in case anyone is curious. Thanks.
|
Re: Factory Defaut TS-1070
Has it decreased to 10 resets?? I thought it was 11.? Unfortunately this is the only way.? Good luck - I've had panels that still refused to factory reset this way.
Does anyone know the manual method for defaulting these panels?
Touchpanel no longer accepting credentials even though I am certain they are correct. Now I need to factory default it manually but not clear on how to do it. A google search mentioned pulling power on the panel 10 times in a row, once the Crestron screen gets to the cycling dot portion.
I think that will take me about 20 minutes at the rate it boots and have to think there is another way. TIA
|
Does anyone know the manual method for defaulting these panels?
Touchpanel no longer accepting credentials even though I am certain they are correct. Now I need to factory default it manually but not clear on how to do it. A google search mentioned pulling power on the panel 10 times in a row, once the Crestron screen gets to the cycling dot portion.
I think that will take me about 20 minutes at the rate it boots and have to think there is another way. TIA
|
nicofreda