Re: Factory Defaut TS-1070
Do I need to wait for the Crestron logo that has the "dots" or can I reset on the first logo I see? I did this for almost 15 minutes yesterday before just giving up. Possibly the biggest waste of time on a touch panel ever, and that's saying something.
|
Re: Factory Defaut TS-1070
It could be like Extron too, one is a reboot, two is clear project, three is whatever.? Do a press and then click five times for factory reset or something like that.? It's pretty stupid the way it is now.
|
Re: Factory Defaut TS-1070
Just did this yesterday with a tech.? Press the reset button in the pin hole on the back until the screen goes black, release.? Once you see a Crestron logo on boot, repeat 10 more times for 11 total.? Wait for it to boot and it will go into a recovery screen with a button to factory reset.? It took him a couple of tries to get it right.? Note to Crestron, this is absurdly complicated.? A 30 second hold on the reset button like every other device made is adequate.??
|
I'm not sure what you mean by an accident.? Did you delete them, or did you run the drive over with a car?? There are free undelete programs out there and other services.? Is this a mechanical drive that won't spin up?? Put it in the freezer for a few hours, I've done that many times and recovered gigabytes of data.? There are lots of methods, depending on the scenario.? Recuva and PhotoRec are good tools.? PhotoRec will work on corrupted drives.??
|
Re: CTI-P201 Entrance Exam part 1
*..if they are wrong in the first try.¡± NFH
toggle quoted message
Show quoted text
On 12 Jul 2023, at 13:59, nicofreda via groups.io <cdandcontrol@...> wrote:
? With p301 you have just a second chance to send corrections if they are on the first try. If that second try is not good, you need to wait 3 months to retake it. Not sure if its the same with 201, but I would asume that.? Nico NFH On 12 Jul 2023, at 13:47, Robert Shackelford <rshackelford76@...> wrote:
? I believe you get 2 tries to take it. Then you have to contact them to take it again. At least that's the way it was years ago when I took it. Hi there, this is my first post here.? I took CTI-P101 almost a year ago but only in the last couple of months or so have I had extended periods of time to look at and modify programs, and I think I'm starting to get the hang of this.? I was looking into the 201 course, but it looks like the first step is a 1 hour multiple choice exam.? I was thinking of taking it just to see if I'm anywhere near ready, but are there some sort of parameters to it?? Like if you take it once you have to wait X days to try again, or does it reflect poorly on you if you take it and get a terrible score?? I'm just curious what happens after you click "Begin Exam".? I'm not looking for answers, but details on the process.
Thanks.
|
Re: CTI-P201 Entrance Exam part 1
With p301 you have just a second chance to send corrections if they are on the first try. If that second try is not good, you need to wait 3 months to retake it. Not sure if its the same with 201, but I would asume that.?
toggle quoted message
Show quoted text
On 12 Jul 2023, at 13:47, Robert Shackelford <rshackelford76@...> wrote:
? I believe you get 2 tries to take it. Then you have to contact them to take it again. At least that's the way it was years ago when I took it. Hi there, this is my first post here.? I took CTI-P101 almost a year ago but only in the last couple of months or so have I had extended periods of time to look at and modify programs, and I think I'm starting to get the hang of this.? I was looking into the 201 course, but it looks like the first step is a 1 hour multiple choice exam.? I was thinking of taking it just to see if I'm anywhere near ready, but are there some sort of parameters to it?? Like if you take it once you have to wait X days to try again, or does it reflect poorly on you if you take it and get a terrible score?? I'm just curious what happens after you click "Begin Exam".? I'm not looking for answers, but details on the process.
Thanks.
|
Re: CTI-P201 Entrance Exam part 1
I believe you get 2 tries to take it. Then you have to contact them to take it again. At least that's the way it was years ago when I took it.
Hi there, this is my first post here.? I took CTI-P101 almost a year ago but only in the last couple of months or so have I had extended periods of time to look at and modify programs, and I think I'm starting to get the hang of this.? I was looking into the 201 course, but it looks like the first step is a 1 hour multiple choice exam.? I was thinking of taking it just to see if I'm anywhere near ready, but are there some sort of parameters to it?? Like if you take it once you have to wait X days to try again, or does it reflect poorly on you if you take it and get a terrible score?? I'm just curious what happens after you click "Begin Exam".? I'm not looking for answers, but details on the process.
Thanks.
|
CTI-P201 Entrance Exam part 1
Hi there, this is my first post here.? I took CTI-P101 almost a year ago but only in the last couple of months or so have I had extended periods of time to look at and modify programs, and I think I'm starting to get the hang of this.? I was looking into the 201 course, but it looks like the first step is a 1 hour multiple choice exam.? I was thinking of taking it just to see if I'm anywhere near ready, but are there some sort of parameters to it?? Like if you take it once you have to wait X days to try again, or does it reflect poorly on you if you take it and get a terrible score?? I'm just curious what happens after you click "Begin Exam".? I'm not looking for answers, but details on the process.
Thanks.
|
Re: Factory Defaut TS-1070
Found it at?Answer ID:?1001577, in case anyone is curious. Thanks.
|
Re: Factory Defaut TS-1070
Has it decreased to 10 resets?? I thought it was 11.? Unfortunately this is the only way.? Good luck - I've had panels that still refused to factory reset this way.
Does anyone know the manual method for defaulting these panels?
Touchpanel no longer accepting credentials even though I am certain they are correct. Now I need to factory default it manually but not clear on how to do it. A google search mentioned pulling power on the panel 10 times in a row, once the Crestron screen gets to the cycling dot portion.
I think that will take me about 20 minutes at the rate it boots and have to think there is another way. TIA
|
Does anyone know the manual method for defaulting these panels?
Touchpanel no longer accepting credentials even though I am certain they are correct. Now I need to factory default it manually but not clear on how to do it. A google search mentioned pulling power on the panel 10 times in a row, once the Crestron screen gets to the cycling dot portion.
I think that will take me about 20 minutes at the rate it boots and have to think there is another way. TIA
|
Maybe. If the programs are for 3 (and maybe 4, never looked) series you can recover the .lpz program from the processor. Then, if you're really lucky, when you compiled it you had simpl set to add the program's archived zip to the .lpz at compile time. At that point you can open the recovered .lpz with 7-Zip and extract the archive and you're back in business.
|
Not unless it¡¯s stored on the processor if it¡¯s only the compiled files then your out of luck. Check the files using the file viewer in Toolbox.?
Hello all,
I had an accident with one of my backups, and I lost a lot of programs in those disk. Is there any chance I can get them directly from the processor actually those programs are running?
Any help will be appreciated.
Thank you.
|
If you have "Create archive and embed into compiled program" set in SIMPL, then you can for 3 and 4 series. It will be on the processor in the App** dir as a zip file.
If that's not set, there's now way to recover it from the processor.
|
Only if you were putting the archive on the processor.
It's a setting in Simpl that needs to be enabled to auto archive the program to the processor when you load a program.
Sorry for your loss!
|
Hello all,
I had an accident with one of my backups, and I lost a lot of programs in those disk. Is there any chance I can get them directly from the processor actually those programs are running?
Any help will be appreciated.
Thank you.
|
Re: Global Cache / Poly Eagle Eye IV
I got this resolved, but I also noticed that the web interface parity setting for the iTach does not match the telnet interface setting.
On Tue, Jul 11, 2023 at 1:48?PM Phil Bridges via <gravityhammer= [email protected]> wrote: Has anybody used Poly Eagle Eye IV cameras with Global Cache iTach serial ports?? I have two EE4 cameras here that let me power them on and off from my VC-4 instance, but will not P, T, or Z.? They work fine when plugged directly into the codec.
Yes, I've set the iTachs to 9600/8/E/1.
|
Global Cache / Poly Eagle Eye IV
Has anybody used Poly Eagle Eye IV cameras with Global Cache iTach serial ports?? I have two EE4 cameras here that let me power them on and off from my VC-4 instance, but will not P, T, or Z.? They work fine when plugged directly into the codec.
Yes, I've set the iTachs to 9600/8/E/1.
|
No problem. NVX can even run on Cat5e so you have more than enough...
I had a grounding issue with using unshielded Cat6 and a POE switch (Injector/power supply) early on. Had to ground the remote units locally - PITA
So unless you need the 8G cable for something else, use that if you plan to power them from a POE+ switch
If you need to reterminate the 8G, I HIGHLY recommend looking at the Belden REVconnect system.
Its the only thing we use for all RJ terminations now and with shielded, Its even a bigger advantage...unless you really enjoy terminating the Crestron Cat7A connectors...HaHa!
Here's the STP termination process:
Here's the easiest source to buy the REV product:
|
My current DM system is now starting to show it's age.
My house is currently wired with CAT6 & DM-8G cable.
I'm planning on using the 8G infra-structure for NVX as re-wiring is simply not an option in my 110yr old house.
Anyone done this already?
Anyone see any potential issues?
Thanks?
slip
|
nicofreda