¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Messages
Expanded Topics Messages Polls
Date
Re: Crestron Go help needed

 

When you placed the iPhone files in the HTML folder, make sure that you you are transfering two separate files, not the one folder.
Re: What is everyone using for IR with VC4? #vc4

 

I'm trying Lincoln's solution mentioned above, since I'm not having the luck that others apparently have with the Global Cache devices.? ?However, despite being set up how I feel is properly (same subnet, IP table pointing at the VC4's IP, etc) the RMC Scaler C that I've chosen for the task isn't coming online with its IP Table.? I'd had the same issue with the NVX devices that are also in the system, until I enabled the authenticated connection in their setup, and then they came online, but the RMC offers no such option.? I did go as far as to point the default router of the RMC to the processor's IP, just to see if it made any difference (it didn't).? I'm fairly certain there's something I'm missing, and I would imagine it has to do with the level of security that the VC4 is looking for, but so far I haven't had luck figuring it out.? Can anyone shed some light???

Thanks.

Nate
BACNet - register as foreign device

 

Hello,
?
have any of you ever used the BACNETRegasfd (register as foreign device) command from the processor console?
?
I want to communicate with a bacnet controller that is on a different VLAN (I can ping it from the processor), but registering as a foreign device does nothing.
?
Today I started testing those bacnet commands at home (with wireshark open) and - what puzzles me the most - when I send the BACNETDEVICediscovery command from the processor console I could see it in the wireshark (who-is query, BACNet APDU protocol), while when sending the BACNETRegasfd?command, nothing appeared in wireshark...
?
Then I checked "register as foreign device" option with YABE and pushing register button caused... the query (who-is, BVLC protocol) actually appeared in wireshark.
?
Could it be some bug in the software then? Has anyone ever managed to use this command and actually register processor as a foreign device?

I am using RMC3, ver v1.8001.4814.24421 for testing purposes.
?
Thanks in advance for your help!
Re: TSW-1070 Virtual Buttons

 

¿ªÔÆÌåÓý

If you are looking for the buttons to show feedback then that is not a feature.?
If you are just looking for button presses then, I just tested this on a TS-1070 using latest firmware without an issues.?

?Nate


On Apr 15, 2023, at 3:45 PM, wartyhogus <wh888@...> wrote:

?? How do I activate these ? I tried using the default Slot One in Simpl, my Signal works through Debugger (close App). However the button does not. I also tried VTPRO reserve Close APP and that does not work either. Previously I tried other command Volume , Lights etc. Never get response on the Virtual buttons. I feel like I am missing something very simple. Thanks

TSW-1070 Virtual Buttons

 

? How do I activate these ? I tried using the default Slot One in Simpl, my Signal works through Debugger (close App). However the button does not. I also tried VTPRO reserve Close APP and that does not work either. Previously I tried other command Volume , Lights etc. Never get response on the Virtual buttons. I feel like I am missing something very simple. Thanks
CLEI DIMUEX Phase

 
Edited

How do you force the dimming phase on a Clwi dimuex? ?Auto is causing flashing and I can see how to get reporting but not change the phase from auto to reverse to forward to see if a fixed setting help. ?Thanks
Re: Crestron Go help needed

 

What Justyn Said.
Also, in the Go app on your phone, make sure that you 'Enable SSL' and add the UN/PW of the processor (main or user account if set up)...

Other than that it may be an issue with your router rules between subnets like Dobias mentioned
Re: Consistent Warning on Pro3

 

also type "ENABLEFEATURE" in text console. ?You may want to disable some of those services as well.

Michael
Re: Crestron Go help needed

 

¿ªÔÆÌåÓý

Hi Thorsten

In the Crestron Go settings there is an option to allow access to the local network. This can randomly be turned off by default, but not in all cases weirdly.

Good luck.

Justyn

On 15 Apr 2023, at 12:01, Thorsten K?hler <thorsten.koehler@...> wrote:

?

Hi,

?

i need to get a project up and running using the Crestron Go app.

Some help on the basic steps are much appreciated.

?

What I did so far:
1) Loaded the Go app onto an iPhone (IOS 16)

2) Created a VTP project with ¡°Crestron app¡± as panel (just one page). Projectname matches project file name.

3) Added Crestron Go app to the SIMPL program. Projectname ¡°Crestron Go Project Name¡± matches the VTP name.

4) uploaded SIMPL program and uploaded the VTP-project to the processor.

5) added a user with ¡°connect¡± rights to the processor, authentication is enabled.

6) configured the user above into the Crestron app incl. the other information (processor IP etc.)

7) clicking on the processor in the app shows ¡°Connecting to System¡± and that?s it.

?

iPhone and processor are on different subnets, but ping between processor and iphone works (vice versa).

I?m also having trouble connecting via Toolbox to the Go-app (which should be possible I understand).

?

Any ideas?

?

Thanks,

Thorsten

?
Re: Crestron Go help needed

 

Thorsten,

if you¡¯re able to send me the SIMPL and VTPro files I¡¯ll load onto my test area and take a look for you. ?We have many CP3 processors and iPad Go apps connecting.

steve?
Re: Crestron Go help needed

 

¿ªÔÆÌåÓý

Are there firewall rules blocking traffic??

Verstuurd vanaf mijn iPhone

Op 15 apr. 2023 om 12:57 heeft Thorsten K?hler <thorsten.koehler@...> het volgende geschreven:

?

Hi,

?

i need to get a project up and running using the Crestron Go app.

Some help on the basic steps are much appreciated.

?

What I did so far:
1) Loaded the Go app onto an iPhone (IOS 16)

2) Created a VTP project with ¡°Crestron app¡± as panel (just one page). Projectname matches project file name.

3) Added Crestron Go app to the SIMPL program. Projectname ¡°Crestron Go Project Name¡± matches the VTP name.

4) uploaded SIMPL program and uploaded the VTP-project to the processor.

5) added a user with ¡°connect¡± rights to the processor, authentication is enabled.

6) configured the user above into the Crestron app incl. the other information (processor IP etc.)

7) clicking on the processor in the app shows ¡°Connecting to System¡± and that?s it.

?

iPhone and processor are on different subnets, but ping between processor and iphone works (vice versa).

I?m also having trouble connecting via Toolbox to the Go-app (which should be possible I understand).

?

Any ideas?

?

Thanks,

Thorsten

?
Crestron Go help needed

 

¿ªÔÆÌåÓý

Hi,

?

i need to get a project up and running using the Crestron Go app.

Some help on the basic steps are much appreciated.

?

What I did so far:
1) Loaded the Go app onto an iPhone (IOS 16)

2) Created a VTP project with ¡°Crestron app¡± as panel (just one page). Projectname matches project file name.

3) Added Crestron Go app to the SIMPL program. Projectname ¡°Crestron Go Project Name¡± matches the VTP name.

4) uploaded SIMPL program and uploaded the VTP-project to the processor.

5) added a user with ¡°connect¡± rights to the processor, authentication is enabled.

6) configured the user above into the Crestron app incl. the other information (processor IP etc.)

7) clicking on the processor in the app shows ¡°Connecting to System¡± and that?s it.

?

iPhone and processor are on different subnets, but ping between processor and iphone works (vice versa).

I?m also having trouble connecting via Toolbox to the Go-app (which should be possible I understand).

?

Any ideas?

?

Thanks,

Thorsten

?
Reverse Proxy VC-4

 

Hi all,

I'm trying to reverse-proxy my personnal VirtualControl Server with nginx without success.

Has someone managed to make it run?

Regards,
Re: IP Camera in Crestron App

 

It doesn¡¯t, easiest way is via Crestron Go on an iPad. ?
VC-4-PC-3 with On-Prem Fusion #Fusion #vc4

 

Has anyone set up a VC-4-PC-3 with on-prem Fusion? Can't find much documentation on it and waiting for an email from Fusion Support Group.?

Thanks!
Re: Consistent Warning on Pro3

 

As others have said, that message is related to XiO Cloud functionality.
I don't recall offhand if newer 3-Ser FW suppressed that particular message or not, but you should either:
1) Disable XiO features from Toolbox or console command if the processor won't have internet access.
2) Check processor's settings related to XiO Connection - Internet access (DEFR, DNS, etc.), TIMEDATE/TIMEZONE/SNTP (time discrepancies can prevent auth), HYDROGENSTATUS, etc.
Re: Strange SRL behavior

 

Sending formatted text to a SRL indirect text object should work ok. I've used it before, in the format:

<P><FONT size="16" face="Arial Unicode MS" color="#000000">Some Label</FONT></P>
Re: Strange SRL behavior

 

I'm using a bunch of SRLs, both horizontal and vertical in my VTPro projects, and I have run into weirdness occasionally where if one object is sent some text which overflows its intended boundaries, the SRL seems to shift the text on every other button to try to account for this. Are you using the indirect text serial join to send text or are you defining a serial join for the text inside the label itself on the button? In my experience, I have never gotten the indirect text serial join to respond to formatting coming from the control program, but a serial join defined in the label would.
Re: Strange SRL behavior

 

I should add the only thing on the subpage is an advanced button.
We are working around the issue by deleting the button text and adding a simple label, which displays correctly, A formatted text object also had the same issues.
Re: Strange SRL behavior

 

I'm using a bunch of vertical SRL in my current project and haven't seen that behaviour.? I'm running whatever the latest is available through master installer.

Do you happen to have both the indirect text join AND also defined embedded within the text editor on the SRL subpage?
6921 - 6940 of 256349