开云体育

Thanks all

Lucky.? I've got integrators who have been waiting for months.? This is not an easy part to find and unfortunately when they go bad..... you know.

Hi Dave,
That'd be great! I'll take it if its still available...
Please reach out to me directly at:
chris at eicustom dot com

TIA!

I have a Pro2 that's in good shape.? I thought someone on ebay would want it, but after 3 weeks there hasn't been any interest.

Is it of use to anyone here?? It has the ethernet card and a good CF card.? Cover shipping and it's yours.? Seems better than throwing it out.? If no one wants it, it's off to the recyclers.
?- Dave

The 'U' versions are current, so I'd expect that you'll get them...

FYI, I found a friend who had one and was nice enough to help me with it, so I'm good on this one (Phew!!!!)

?Does anyone know if these are even getting shipped? My order update says i am supposed to get some within a month. However I wonder if they even are making them. Thanks

I would also recommend setting up a dedicated SSID for the TSRs at just the 2.4g freq.?
In larger systems with multiple APs, I would also have unique SSIDs on each AP and tie the TSRs to the closest AP to each of them.
They are not designed to be roaming devices...

I agree that this is not excellent in its design...

No, if this is the one included with the UC kit it's intended as a dedicated connection for the included touchscreen, and can't be modified to work on another network. (IIRC)

Is there a way to keep the address of the USB adapter from changing back to "169.254.0.1"?

Mitch,

Thanks for the input. the FW is up to date and I do check that on a regular basis.? Signal strength is OK and I also performed a "Health Check" of the remote (in question) and that test indicated that it was healthy?
That said, the signal is definitely weaker.? I am presently not utilizing a dedicated WAP.? Previously, I had a TP Link Wall-Wart Extender located in the Fam Rm and it literally sucked the battery dry very quickly so I removed it.? I am presently relying on the main Router, which is a Linksys MR 9600 Wi-Fi 6 AND Mesh compliant Giddy-Up.? I have not deployed any Mesh Extenders, yet.

I did forget to mention that I am also experiencing frequent "System Crashes.? The APP asks what was or did happen and the answer is I don't know becasue I receive the message upon opening the APP.? Cleary, it is a great puzzlement!? I did ask the question as to exactly what a "system Crash" indicates.? Is it a momentary interruption in the "Force"...Wi-Fi or Ethernet connectivity to the WAN, possibly, or some other yet to be determined cause?? If it is a Wi-Fi signal concern, I can easily add a MESH Extender to that zone.
However, the CP4-R is connected via Ethernet to my Luxul 26/24 Port PoE E-Switch and that has always been very robust and relaible.? Mr. Cornfused

Is the firmware on both the TSR-310 and CP4-R up to date? The past few TSR-310 releases specifically address some connection and favorite issues.

What access points are you using and how is signal strength in the room? If you suspect wifi issues you could try to lock it to the closest AP or certain band.

My system is comprised of a CP4-R and two TSR-310 remotes.? I am controlling the local Family Room DTV Sat Receiver via IP. The Family Rm audio is deployed as Zone 3 on a Denon AVR-X8500 receiver and it too is being controlled?
via IP.? TV is an LG C2 OLED 42".

Issues:
TSR is continuously disconnecting from the Processor and then reconnects.? Almost daily, I have to perform a hard reboot of the processor to make the FAV Channels function again.? Once the reboot is completed, they work perfectly until the next episode...again nearly a daily requirement.? Often, the Family Rm System will initialize but the Sat will fail to fire-up and require utilizing the DTV Remote to turn on the SAT Rec'r.? This is not as frequent as the FAV CH issue nor the constant remote disconnect/reconnect dance.? ? ?

Someone posted a possible approach and or remedy with a link but I apparently deleted that post.? any and all insights are greatly appreciated.? In closing, I am capable of dealing with this nagging issue but if it were deployed in a customer's home, the?
discussions would quickly become unbearable and possibly involve legal ramifications?

Thaks again for everyones insights.

Mike Moran
?

"He asked, expecting the answer no..."

Does anyone have either a CLX-2DIMU8 or CLX-1DIMU4-HP that they'd be willing to part with??
TIA!...:)

It should be in the vacinity of 50k IIRC.

Ha! I guess that's another built in "feature." I don't feel like it's 100% consistent though. This morning I was trying to recreate the "helpful" behavior your describing that got me yesterday, but this morning it wasn't moving them - just creating duplicates in a new folder.

I like the workflow though! Thanks for sharing!

I generally do:
1) Duplicate Device Programming
2) Delete "Smart Graphics Modules" folder
3) Copy/rename logic folder

If you use duplicate on a device that already has connected modules, it "helpfully" moves all of your modules into the new folder...