开云体育

Just a follow-up...
Because of other 'unrelated' issues we were having with the TSW-1052's, the other day I factory-defaulted the TSWs and reset them up. since then I've not seen this error(s) or issues...
so this may have been the issue...

Thru further testing, I found that my 'PulseIR' version of the driver did not have the pulse ir filter properly applied - could be that I didn't click SAVE hard enough, or something stupid like that...
Once I fixed this, the driver started only pulsing for 1/2 sec. like it should.

I still concur that this is some sort of bug with the LG drivers and the RMCs, but this is good enough for the application...

Thanks for everyone's input...!

As far as I know there is no separate API for the DMPS line, so you would need to write a program for the DMPS3-200-C that accepts custom commands over TCP from your QSC processor and then selects the appropriate routing in the DMPS for what you need based on the command that you send.

If you draw a TexEntry object in VTPro on the screen, there is a check box that shows "Launch Keyboard". As far as I know though that always launches on the Crestron App ( it states that in the context help when you highlight the setting ). I believe you can assign the "Set Focus On Digital Join" and pulse that signal on the touchpanel symbol to force focus to the TextEntry and that should display the keyboard. If you don't want to use the TextEntry field you would need to create your own keyboard on the UI and handle the key presses in Simpl.

Anyone know how you make the keyboard visible ready for code input from simpl?
The requirement is 4 Save Preset buttons.
When pressed - pop up the keyboard with a text entry field so the user can enter a preset name.
Enter (join 152) Saves
Esc (join 153) cancel
Thanks

I am using Virtual controller and looking to control LG screens and iiyama screen.

In VC-4

it is....

http[s]://<vc4_ip_address>/VirtualControl/Rooms/<room_ID>/cws

Hi Jeff,

thanks for confirming.

In a typical appliance box the URL would be:?

I tried a few combinations with inserting the instance name but none of it worked... can you give me an example on how the URL works on a VC4?

thanks!

Hello guys. I work as a Qsys freelance programmer. I have this one project where QSC control nano is being used as a control processor and dmps3-200-c simply as a switcher with 2 HDMI inputs and 1 DM input

The control will provided on a QSC touchpanel. Is there a way I can communicate to dmps when a source is selected on touchpanel to trigger switching for video and audio in dmps?

Thanks in advance.

We have this working… what url are trying to use? The VC-4 path is different than processors. They include the instance name, so they are unique for each program.

we have a free set of modules that expose CWS. Search for “cRestful” in Google. These should work as a test.

While this doesn’t help, my experience with TST-902s has been absolutely terrible. I have three current projects that have a decent amount going through a lot of issues. The first had 4 and all 4 were replaced. Crestron swore that there were no known issues. Crestron ended up replacing all 4 with TSWs. The second has 6, we’ve replaced 11 so far… yup more than the total sold were replaced. The third project has 5 and is just starting to use them on a regular basis, issues have been drastically increasing.

Each of these projects have experienced:
- Communication dropping, if this happens during a ramping event the processor never receives a release event causing the analog to ramp to either extreme
- RF settings being wiped out
- Black screen, only recoverable by resetting the panel
- Battery swelling under a year
- Never ending loading firmware loop, not recoverable (this is the issue that has to be sent back to Crestron), usually “repaired” these days and return exactly the same

Crestron refuses to acknowledge any of these issues are known even though they’ve literally replaced some with TSWs. Each time we have a lot of issues it’s like pulling teeth to have them do anything, let alone the right thing and replace the product.

Maybe because serial is more widely used to control LG's vs IR? Perhaps the OP could use serial vs IR with better results.

Pretty much sums up my experience with them.? Replace with ipads and put it down to a lesson learned. :)?

I'm having a hard time getting a VC-4 to host some HTTP data using CWS.
The same code works fine from an appliance... but on VC-4 I keep getting a 404-Error Not Found.

Anybody out there *successfully* using CWS with a VC-4?

?

We have decent experience with the TST-902's.? All of them from systems we take overs because we would never spec them in.? One client had 9 of them across their building and we experienced the same thing.? All of them will drop communication periodically, not update feedback, screen goes blank, etc.? Wifi seemed to be slightly more reliable then the GWEXER however they both sucked.? In the end the only reliable solution we could find for the customer was replacing them with iPads or hardwired TSW panels.? Which in the end was crazy with the client that had 9 of the TST's and each in a wall dock.? When we took the system over they never even realized the panels can be removed from the dock.? They thought they were permanently fixed in the walls.? So, replacing those with in wall TSW panels was a good solution for them.? Crestron telling you they don't know what is going on or haven't seen this issue before is BS.? The issues you're experiencing has appeared on every single one I've ever worked on.??

Thanks for the reply! I'll start a new thread on this and continue my education!! :)?

CP3 with the latest -?v1.8001.0214

I don't think that the issue is the IR driver, per se, as I've tried a version with the Pulse IR filter applied.
We did some more testing and multiple LG files behaved basically the same way, BUT the tried and true Samsung UN series driver worked fine.
It appears to be something about the LG drivers being processed thru the RMC IR output...
Granted, I haven't dealt with LG at all more than 2-3 times in the last 5-7 years, but its weird to me that no one seems to have see this issue. there has to be at least 10% of the DM installs that have LG TVs on their RMCs, wouldn't you think??

Have seen these errors throughout the awesome Sonos "integration" years, and I know they disappeared with newer firmware. What FX are you running on this system??