Re: LG 43UR640S IP Control
Hi Gary,
Have you set PM to Network Ready?
Also, does the Display have Crestron Connected? I vaguely remember using that for a similar model.
|
Has anyone managed to get an?LG 43UR640S to wake on LAN? I have tried everything suggested in? /g/crestron/message/246127?to no avail.? The menu structure is different from other LG displays I have worked with but to access the advanced menu you hold the settings button and type 1105 then OK. One in there, I have set "WOL(Magic Packet)" to "Power On" and have turned "LG Connect" to "On". I have tried UDP ports 9 and 12287 with no joy, a port scan shows a UDP port on 161 which I have also tried. All power saving options have also been turned off. Any help would be greatly appreciated. Thanks in advance, Gary.
|
Re: AUTH and SSL on 3 Series
John, agreed with your situation as that was how our CP3N was as well. ?It had been nursed along from update to update never having AUTH nor SSL turned on. ?Once an INIT/RESTORE was performed on the replacement unit there was no going back. ?1.8x FW without AUTH/SSL then INIT/RESTORE then forced AUTH. No rolling back or combination of nonsense ¡®fixed¡¯ it. ?Dave H was able to repeat and confirm this on the bench. ?I sent him the support ticket number and RMA in response to his input to this thread but never heard back.
|
Re: CP4 with TPS-4L on Windows 11
Never heard anything like that. I just did some updates on 4Ls for a site a couple months ago with no issues.?
|
Re: AUTH and SSL on 3 Series
We have a takeover job where we just started to get the system ready for new programming, and it has a CP3 and a PRO3 running 1.501 fw. So I was curious to see if I would run into the same issues when I bumped them both up to the latest 1.8. Auth was not enabled before and after the updates it still was not enabled (although I did enable it later on). Which seems similar to other sites of ours that we have updated.?
Must be something in that N version that caused this. Sucks that they can't help you out on this though. Its getting pretty rough and they are killing us with these BS stock issues.?
|
CP4 with TPS-4L on Windows 11
Good morning guys,
I'm upgrading an old AV2 install to a CP4, and the client wants to keep the old TPS-4Ls in place until the house is decorated in the next year.
I can see the TPS-4Ls drop into the project, so I'm happy there. I've heard a rumour that you can't upload to a TPS-4L with the current VT-ProE.
Does anyone have any experience with TPS-4Ls on a 4-series system? Is there anything I should be aware of for this install?
|
Re: AUTH and SSL on 3 Series
I don't know if it's already been mentioned, but couldn't you add an old PRO2 or AV2 for only the Mobile Pro symbols, then EISC them over to the 3-series program?
toggle quoted message
Show quoted text
--- On Tuesday, October 18, 2022 at 9:27 PM, AVMaster wrote:
It is a CP3N and as luck would have it I have that exact memory card on the way
from Mouser. I unfortunately don¡¯t have any other CP3N processors to get the
image from. Mouser apparently has 1900+ of these in stock and ready to ship so
I can¡¯t imagine how Crestron ¡®wouldn¡¯t¡¯ have access to them. The FW/AUTH
issues arise from the fact that for years Crestron has touted that the 3 Series
hardware was able to be maintained in a way that provided compatibility with
existing systems. That just simply isn¡¯t true. I have quite a few very large
AV systems in the wild that will be unrepairable in the event a processor goes
down and a similar legacy device cannot be sourced. The rhetoric was always
just ¡®roll back the FW¡¯ and good to go¡especially given the current situation
where new processors haven¡¯t been shipping for over a year. Crestron just
keeps piling on reasons for clients to look elsewhere. All we needed to make
this system 100% perfect again¡100% functional was a processor that was in the
same state as the one removed. I am now stuck with an angry client, an
expensive system and a roulette wheel of price gouging eBay sellers. Our rep
is no help, Crestron apparently can¡¯t or won¡¯t fix it and I can¡¯t afford to
just willy-nilly buy more overpriced processors and hope that they have never
had AUTH/SSL turned on. I mean gimme a break here Crestron.
|
Re: AUTH and SSL on 3 Series
It is a CP3N and as luck would have it I have that exact memory card on the way from Mouser. ?I unfortunately don¡¯t have any other CP3N processors to get the image from. ?Mouser apparently has 1900+ of these in stock and ready to ship so I can¡¯t imagine how Crestron ¡®wouldn¡¯t¡¯ have access to them. ?The FW/AUTH issues arise from the fact that for years Crestron has touted that the 3 Series hardware was able to be maintained in a way that provided compatibility with existing systems. ?That just simply isn¡¯t true. ?I have quite a few very large AV systems in the wild that will be unrepairable in the event a processor goes down and a similar legacy device cannot be sourced. ?The rhetoric was always just ¡®roll back the FW¡¯ and good to go¡especially given the current situation where new processors haven¡¯t been shipping for over a year. ?Crestron just keeps piling on reasons for clients to look elsewhere. ?All we needed to make this system 100% perfect again¡100% functional was a processor that was in the same state as the one removed. ?I am now stuck with an angry client, an expensive system and a roulette wheel of price gouging eBay sellers. ?Our rep is no help, Crestron apparently can¡¯t or won¡¯t fix it and I can¡¯t afford to just willy-nilly buy more overpriced processors and hope that they have never had AUTH/SSL turned on. ?I mean gimme a break here Crestron.?
|
Re: where do programmer's go
The higher ed market is a pretty sizable chunk of AVIXA's?membership. There are a bunch of us at universities that wear the programmer hat pretty regularly. It'd probably take?a pretty sizeable institution to keep you busy 100% of the time with Crestron programming, but programmers also fix most wiring problems :D so chances are that you also have technician and design skills that would be useful to the AV/IT teams at a school.?
Integrators, manufacturers, schools, embedded support, etc. There are a lot of opportunities, but I agree with you that a lot of leads from recruiters and placement agencies aren't directly irrelevant.?
Good luck!?
Jim?
On Mon, Oct 10, 2022 at 12:28 PM Cory < cory@...> wrote: I am a programmer, and have always had regular salary jobs.? Just do a Google search for AV integrators in the area you live/want to live and look at their job postings or give them a call. it always worked for me.
On Mon, Oct 10, 2022 at 12:07 PM Wyatt J < wyatt@...> wrote: Just curious where programmers go when they are looking for a regular salary job?? I really don't think Indeed is as good as their advertisements.? Recruiters are just salesmen; they would sell muffler bearings if they could.? It seems like there has to be a forum somewhere where those with good jobs can find those who want to work.??
-- Jim Spencer, ,?Mendoza IT, Educational Technologies University of Notre Dame
|
Re: AUTH and SSL on 3 Series
So just to follow up¡
After repeated attempts with tech support to ¡®roll back¡¯ the FW on this unit it finally threw its hands up in the air and gave up. Crestron issued an RMA and we sent it back. ?They are now telling me that the unit is unrepairable due to it being out of warranty and unavailable parts. ?This smells like total BS. ?Can someone please enlighten me as to how a failed FW update can cause an otherwise perfect processor to become unrepairable? ?Current situation in Crestron land is no new processors and out of warranty ones cannot be fixed? ?Please¡someone throw me a bone here.
|
Re: OT: Presentation projector
Are you sure 4K is required for the planned application? Going below 4K could drive cost significantly down. ? Cheers, Thorsten ? ? Hi All,
We're working on a church project and need a couple *reasonably priced* 4K projectors that have 8-10,000 lumens.
Any suggestions?
TIA!!
|
Re: OT: Presentation projector
Chris,
I've used DPI projectors in several commercial projects over the years, and they've been extremely reliable.
I don't even know what reasonably priced means anymore.
DPI E-Vision 11000 4K-UHD is about $28k retail - tons of lens options, liquid cooled, sealed optics, 10,500 lumens
To me, anything laser illuminated, over 10k lumens, and under $30k retail is very reasonably priced.
I'm sure that Epson has something that fits the bill at a lower price, but I haven't used them.
Good luck,
Brian
|
OT: Presentation projector
Hi All,
We're working on a church project and need a couple *reasonably priced* 4K projectors that have 8-10,000 lumens.
Any suggestions?
TIA!!
|
Re: SimplSharpOnvifInterface DLL - PTZ speed control problems
Hi,
I'm looking for the way to control PTZ Hikvision cameras.
Could you share the code which uses SimplSharpOnvifInterface.dll?
Many thanks.
|
On Mon, Oct 17, 2022 at 05:31 AM, <lo@...> wrote:
Yes you are right. The more I read about the AP4, the more I have no solution to this control subnet port mapping.?
Now I'm lost with what to do next, sigh.?
1. What is the reason that you're looking to use a Control subnet? 2. you can use a reasonably inexpensive router to set up the same configuration via VLans, one for the processor and one for the control subnet devices. If your network already has a decent router, you may be able to use that to configure the VLans (or even the switch, if its sophisticated enough). If its an 'ISP router' then you'll likely need to roll your own....
|
Is there some particular reason you have to have the control subnet?
toggle quoted message
Show quoted text
On Oct 17, 2022, at 5:31 AM, lo@... wrote:
?Yes you are right. The more I read about the AP4, the more I have no solution to this control subnet port mapping.?
Now I'm lost with what to do next, sigh.?
|
Hayward Omnilogic pool Lights integration
Hello, this is my first time setting this up, and it works great except the Lights page, for some reason it will not populate, the module is straight forward and i dont see any troubbleshooting that i can do. does anybody ran into this problem?
TIA
|
C# Programmer Needed for NYC Project
Hey everyone,
My company is in the middle of a project in NYC and need a programmer who is experienced with C#.? Can anyone point me in the right direction?? This project is very time-sensitive.? Any help would be appreciated.
Thanks!
|
Yes you are right. The more I read about the AP4, the more I have no solution to this control subnet port mapping.?
Now I'm lost with what to do next, sigh.?
|
You¡¯re going to find this tough as the DIN-AP4 processor doesn¡¯t have a Control Subnet physical interface or internal router.
I¡¯m guessing the AP4 is a substitute for a CP4N?
I think a design change may be required.
|
AVMaster
Deuterios