Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
- Crestron
- Messages
Search
|
I don't know if this will help, but some of the USB devices that I repair will change their USB identity or disconnect during booting or doing firmware upgrades.? That may be screwing up the NVX or the NVX is too slow to do the handshake when the computer boots.? You might try putting a USB hub between the computer and the NVX to maintain at least some type of connection to the NVX while the computer boots.? Or you might try using a 3rd party USB/Ethernet adapter instead and see if the works.
|
|
Re: crestron.com online help issue
¿ªÔÆÌåÓýHm, works for me¡ ? Cheers, Thorsten ? ? Von: [email protected] <[email protected]> Im Auftrag von Slip Cougan ? Well it's broken again today and unfortunately Robert's trick didn't work today. |
|
Lutron Quantum Login
I am working with a Lutron Quantum system for the first time. I am sending the phantom keypad commands via SIO but it is asking for (login:) from the RX$. I tried sending admin\x0D\x0A but that does not work. Not sur if anyone knows how to send the login information it is asking for but wanted to try. Any help would be appreciated.?
Thanks, Rohan |
|
We are using NVX with layer 2 switching with the computer USB running through NVX.? Everything seems to work fine except accessing the BIOS or boot options.? Currently, we have to move the keyboard directly into the computer's USB port to access these two options.? Has anybody encountered this or have a solution?
Thanks Steven-The University of Alabama |
|
Re: Home appliances integration with Crestron?
#crestron
"I can't help but think of our local volunteer FD that went on a run a couple of decades ago while the coffee machine was on only to return to a burned down fire station."
There's an irony there - just not quite seeing it :) -s |
|
Re: Home appliances integration with Crestron?
#crestron
I can't help but think of our local volunteer FD that went on a run a couple of decades ago while the coffee machine was on only to return to a burned down fire station.
|
|
Topics in Home Automation - New Article in Residential Tech Today
My latest article, "Smart Cooking with the Multo by CookingPal¡± is being published by the good folks at Residential Tech Today Magazine on their web site.
No everyone is a great cook.? Some people are too busy with their careers to learn the skills.? Others are just going out on their own and haven't yet had a chance to learn.? The Multo by cooking pal is an all-in-one smart cooking appliance that can have anyone producing meals worthy of a professional chef. You can find the article here: For those interested in earlier articles that I've written, you can find those here: ?Finally, for those that want to see even more content I've written about smart home technology you can find that here: Thanks |
|
Re: NVX switch recommendations
#nvx
Sorry for the delayed response. I am not getting notifications when someone is responding.?
I was looking for a single switch that could do a mix of copper and fiber. Extreme has the 5520 series of switches that has 24 sfp ports. I could do a mix of fiber and copper using this switch. My plan was to have 14 fiber connections and the rest be copper. I appreciate everyone's help. B?? ? |
|
Re: Finally Certified
They make the test hard just for the sake of being hard, never in real world will you have to do something similar, where one's goal is to simplify and find the most efficient way to get things to work, the certification exam is exactly the opposite.Exactly my impression, too. But I really love that kind of challenges because I think that's the way I learn the most. Without that crazy task I would never have learned some tricks =D |
|
Re: Finally Certified
Congratulations!!!? I have heard what an heroic effort it takes in recent years!!!? It is quite an achievement...
And I'm 99% residential for the last 36 years!? I can tell you that the real challenges aren't the programming details as much as it is dealing with 'Last Mile' consumer gear that makes all the robust pro gear look bad! ...And then there's the dealing with individual home-owner/clients and their 24/7 needs!!? Trust me you Comm guys, your clients are easy by comparison!!...:):):) |
|
Re: Finally Certified
Congrats On the cert!!! Joshua B Zimmerman The beginning of knowledge is the discovery of something we do not understand. ? - Frank Herbert This message, including any attachments, may include privileged, confidential and/or inside information. Any distribution or use of this communication by anyone other than the intended recipient(s?? The information contained in this e-mail and any attached documents may be privileged, confidential and protected from disclosure. If you are not the intended recipient you may not read, copy, distribute or use this information. If you have received this communication in error, please notify the sender immediately by replying to this message and then delete it from your system.? ? This email may contain confidential and privileged material for the sole use of the intended recipient. Any review or distribution by others is strictly prohibited.? If you are not the intended recipient please contact the sender and delete all copies. On Wed, Jun 9, 2021 at 7:12 AM Olivier Royer via <oroyer=[email protected]> wrote:
|
|
Re: Finally Certified
Congratulations!
I wish I could have the ability for my brain to shutdown and actually complete that certification, but the last two times I requested the test and I saw how convoluted and utterly unnecessary complicated the SOW was, I just was unable to force myself to that exercise. They make the test hard just for the sake of being hard, never in real world will you have to do something similar, where one's goal is to simplify and find the most efficient way to get things to work, the certification exam is exactly the opposite. I guess my brain refuses it. My colleague also made it, kudos to all of youI |
|
Re: Finally Certified
Congratulations!
toggle quoted message
Show quoted text
--- On Wednesday, June 9, 2021 at 5:15 AM, Joda wrote: |
|
Re: Controlling powerpoint presentation from Crestron
¿ªÔÆÌåÓýJust remembering from a discussion we had a couple of weeks ago: That might do the trick. ? Cheers, Thorsten ? Von: [email protected] <[email protected]> Im Auftrag von arildegeland71@... ? Hi |
|
Controlling powerpoint presentation from Crestron
Hi
I was wondering if anybody knows how to control a powerpoint presentation on a computer with a touchpanel. To get the slades in the presentation into the panel as small pictures and the possibility to chose slides. I am using MCU to control the pc from Crestron |
|
CP4 versiports "locking up"
¿ªÔÆÌåÓýHi, ? i?ve got an installation with a CP4 and a couple of sensors (CO?, temperature, humidity) connected to the versiports. Values are reported utilizing a 0-10V range, sensors are driven via a dedicated 24V power supply. ? In general, this works fine and reliable, i?ve got the same sensors in my own home installation connected to a CP3 and never had a problem with it. However, with the CP4 install, the sensor reporting just stops after some time (from couple of days to couple of weeks. The value freezes at it?s latest state and doesn?t change anymore. A control processor reboot fixes the issue. ? Any idea where/what to look for? ? Cheers, Thorsten ? |
PD
to navigate to use esc to dismiss