Keyboard Shortcuts
Likes
- Crestron
- Messages
Search
|
Re: Quiet fans for DM-PSU-8
In case anyone was interested, I have opened the PSU and there s a PC looking low profile power supply I noted middle with a loud 40mmx20mm 12v 2pin fan.
I have ordered a Noctua silent fan and will install in a few days when it arrives. Should do the trick. ill let you guys know. Pretty straight forward swap just a couple dozen screws to remove and replace. |
|
Re: CP3 issues uploading program and CTP errors
Not sure what toolbox but I’ll have a look. I tried usb, tcp connection and ftp via FileZilla.?
|
|
Re: CP3 issues uploading program and CTP errors
The only time I've seen something like that, I had a SD card in the processor with a program on it.? When I loaded, it was loading to internal memory, but the program on the SD card would keep loading up after the code push.? Once I realized what was happening, I popped the SD card out and rebooted and it booted the program I expected on internal memory.? Something to check at least....
-- Jason Mussetter Control Systems Designer Mussetter Programming Services |
|
Re: CP3 issues uploading program and CTP errors
Have you tried loading via ftp?? What version of Toolbox are you running? On Tue, Jan 12, 2021 at 11:57 AM Audvizer <Audvizer@...> wrote:
|
|
Crestron's presence in the EU?
#crestron
Hello guys, I hope you're keeping safe during these tough times.
So I'm thinking about the possibilty of relocating to the EU. What's Crestron's presence over there? is it widely used? or does it somewhat play a secondary role to other technologies? such as KNX and its derivatives? Any information I can get would be greatly appreciated. Thanks! |
|
CP3 issues uploading program and CTP errors
Hi,
Sig file box was ticked before sending.?
|
|
Quiet fans for DM-PSU-8
I just got a DM-PSU-8-PLUS and it cycles some very Louis fans every few minutes. I only have two Poe connections at the moment and it runs quiet than really loud then back to quiet.
I am not worried about warranty; anyone made one quiet? This is in my hall rack outside my bedroom amd will drive me nuts if I can’t silence it (need it to be much quieter). I found a YouTube video to do quiet fans in my Hikvision camera NVR and that worked great for that noisy beast. |
|
Re: Please Help with IR Emitter output Pro 2 completely stumped and frustrated :)
You need to experiment with the flashers.? Some devices can be blinded by the output level of the flasher.? I would hold the flasher a few inches away from the front of the PVR and repeatedly hit something like an arrow key while you move the flasher around to see if it respond.
But another issue (and more likely) could be the IR driver you are using is flaky in some way.? So it is on the borderline of working.? You may have to relearn the IR code or use something like VERT to convert the Crestron IR file to hex format.? Then go in and manually clean up the hex file and then import it back in.? Having a oscilloscope with an IR sensor adapter can be invaluable it checking the quality of the IR code.? You try you IR driver and than compare it to the IR from the original remote.? Not sure if you can still buy scope IR sensors but you have easily? make one with a IR photo diode. One final thing is this remote may be a muticode remote whereas the driver you are using is just sending one of the multicode.? That will cause all types of intermittent issues as a lot of devices won't respond correctly if you aren't alternating between the different multicodes. |
|
Sonos Line-in Module S2.
Many thanks to Peter Jablonicky?
for posting the "Sonos Line-in control" modules in the File section.? I would have never guess it would be possible to control a Sonos via SIMPL or SIMPL+.? Found it works great with the Sonos Connect S1 that I use to downgrade S2 systems to S1 systems when the need arrives.The big question is does anyone knows if it will works with a Sonos S2 system or even better the Sonos Arc in particular?? Have a project coming up when I need to send a client's Bel Canto streamer to a Sonos Arc.? There is a Sonos port in the rack that I plan to connect the Bel Canto streamer output to. Thanks, Steve |
|
Re: Occupancy/motion sensor
开云体育Thanks all.? The Faradite unit looks really nice, size wise, and I also figured out’ there is a Crestron unit GLS-OICLCL-C-CN that for some reason I didn’t find the first time around but it is a bit small at 1.5” diameter.? I am going to give them a try and see if I can fab up a nice bezel out of stainless or aluminum so they fit properly. ? From: <[email protected]> on behalf of <david@...> ? Have a look at this |
|
Re: Occupancy/motion sensor
开云体育Thanks Lincoln ? From: <[email protected]> on behalf of Lincoln King-Cliby <lincoln@...> ? How big a sensing area, what type of connectivity, and how important are aesthetics? ? You could put a GLS-ODT-C-CN in a surface pancake box using Cresnet if that’s an option and aesthetics aren’t critical. ? I’ve used Visonic SPY-series PIRs around my house for really unobtrusive detection (exposed bit is about the size of a quarter) and mount it on a piece of polycarbonate or even wood cut to match the hole. 12VDC power and dry contact output (or you can tie one side of the dry contact to 12V and get a 12V wet output requiring only 3 conductors. ? Beware with the SPY they really don’t like over voltage… ? -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D ? From: [email protected] <[email protected]> On Behalf Of MSTC
Sent: Friday, January 8, 2021 11:41 AM To: [email protected] Subject: [crestron] Occupancy/motion sensor ? I am trying to replace a ceiling mounted BEG automation PD11-KNX-FLAT bus occupancy sensor with something compatible with Crestron. ?Problem is it fits into a roughly 2" diameter hole in a concrete ceiling (no modification to structure allowed). ?I am having no luck finding something that would fit. ?Any reference to a compatible product would be greatly appreciated. |
|
Re: Occupancy/motion sensor
开云体育Thanks Nathan ? From: <[email protected]> on behalf of Nathan Durfee <nathan@...> ? look into the basalte auro (?not sure of hte size, but i know its very small. Also designed for residential, so not sure how your application is. Does work with crestron? |
AVMaster
Michael Block