¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Messages
Expanded Topics Messages Polls
Date
Re: Lexicon MC-10

 

LOL.? Could you even get all the XLRs on a 1U.
Re: Lexicon MC-10

 

There are MC-10 modules available. Got them from their site.? There is both an RS232 module and an IP module.? I installed one about 3 months ago.? FYI you can not simultaneously have the ethernet port available and control via RS232.? It is one or the other.? So if you plan on controlling via RS232 you will need to do the CAL before changing the control option.? I just switched the client to RS232 because the PRO2 stop controlling via IP for some reason.
Re: Interlogix alternative

 

SB2000AM is required for Concord series.? There is a module in the DB.? The problem is getting one.? GE stopped manufacturing in December and Distys have not had GE/ITI parts since then.? There are 3rd party wireless peripherals available and they are just OK.? We have moved on to DSC Power series with the IT100 and it has been solid.? Not as quick to setup a system as GE, but not much more involved.? I hoping that without the goto of GE that Crestron would have more drive to integrate the NEO, but nothing yet.
Re: Samsung QE series & Samsung IP Display v1.3 driver #samsung

 

No, but I haven¡¯t had a chance yet to go back and try using port 1516 as has been suggested, although, considering this driver is specifically listed as for this ¡°The Frame¡± model, I don¡¯t see why it would be connecting to the wrong port by default.

Have you tried using 1516?
Re: Samsung QE series & Samsung IP Display v1.3 driver #samsung

 

Good morning Rick,

Have you had any luck with this driver?? I am getting the same thing.? Very frustrating...Thanks.
--
Matt Grisafe
AV Programming Associates

760-632-6996
Re: Setting a Simpl# Array Size based on a constant in Simpl+?

 

¿ªÔÆÌåÓý

But why....

Limitations of the S+/S# mechanism prevent you from doing this easily as S+ automatically instantiates the S# class using the default constructor and you don¡¯t have control over when.?

Just use a collection type like List rather than Array and it grows as necessary to match whatever data you feed it from S+.?

There¡¯s no need to use an Array in S# just to match the Array in S+.?


On Oct 28, 2020, at 9:12 AM, aecohn0210@... wrote:

?

[Edited Message Follows]

I'm looking to create an array in Simpl# whose size is dependent on a constant in Simpl+.

With Simpl+, I can just have the constant be 10, for example, and then point inputs/outputs/arrays to that constant size, and recompile whenever I'd like to expand or contract the module.

But attempting the same with Simpl#, I get errors. I tried to pass the value into the new array in the constructor, via function Main, but it didn't take.

Is there a best practice for achieving this?

Thank you

Re: Interlogix alternative

 

I am looking through this old thread and wondering about Interlogix SuperBus 2000 Automation module. Would that help in integrating to older GE systems and is there a Crestron module out there for it?
Topics in Home Automation - New Article in Residential Tech Today

 

My latest article, "How to Know When Events Take Place in a Smart Home¡± is being published by the good folks at Residential Tech Today Magazine on their web site.? It is very important for a homeowner to be informed when their smart home processor / hub detects events taking place in their home.? This article looks at a number of smartphone?notification apps that can be integrated with various smart home systems.????


You can find the article here:



For those interested in earlier articles that I've written, you can find those here:

?

Finally, for those that want to see even more content I've written about smart home technology you can find that here:

?

?

Thanks

?
Setting a Simpl# Array Size based on a constant in Simpl+?

 
Edited

I'm looking to create an array in Simpl# whose size is dependent on a constant in Simpl+.

With Simpl+, I can just have the constant be 10, for example, and then point inputs/outputs/arrays to that constant size, and recompile whenever I'd like to expand or contract the module.

But attempting the same with Simpl#, I get errors. I tried to pass the value into the new array in the constructor, via function Main, but it didn't take.

Is there a best practice for achieving this?

Thank you
Re: Biamp Control Subnet

 

Yes, forwarding Port 61415.

However, this only works if you have a single DSP on the subnet. If you've got multiple?FORTEs or a SERVER and a FORTE, etc., the software will complain that it can't connect to all units and you won't be able to do anything.

I asked Biamp about this a few months ago and the response I got at the time was that there was no way around this. We ended up replacing the pair of FORTEs with a single SERVER-IO at that site for this reason.

On Wed, Oct 28, 2020 at 8:19 AM <gmonticello@...> wrote:
Has anyone successfully routed a biamp tesira through the Control Subnet and able to connect with Tesira Software? If so, what ports did you use?

Thanks

Biamp Control Subnet

 

Has anyone successfully routed a biamp tesira through the Control Subnet and able to connect with Tesira Software? If so, what ports did you use?

Thanks
CP4 v2.4508.00035 Errors when stoping/restarting programm

 

Everytime when i Restart my Programms (3 Slots in total)

i get tons of those Messages in the errorlog

?Error: CIPCommandProcessor # 2020-10-28 12:45:10 # SendMessageToTLDM. Error on send. Error Code 0x0
?Error: CIPCommandProcessor # 2020-10-28 12:45:10 # SendCresnetPacketToTLDMFromESA fails for 3

Does anybody know how to resolve this, Crestron True Blue spport has no idea
Re: Launch other Apps from Crestron App

 

Thanks.? Seems like that should have shown up in a Google search.? I had no idea it was so simple.


On Wed, Oct 21, 2020 at 4:35 PM mike via <mike=[email protected]> wrote:
Just in case you need these:

Zoom Rooms is ZoomRooms://
Zoom is zoomus://

I don't think capitalization matters.? I've test the Zoom Room Open URL function with that exact string and it works.

Michael
Re: New Processor FW v1.603.0113

 

Eric,
Is it only with NVX Directors with NVX's nested? or also with individual NVX's directly on the IP slot??

I personally find the director to be useless, except for nesting IP-IDs....
Re: Issues with Sonos & Crestron

 

Yes they are ticking timebombs!!? They have been for 2-3 years actually...
It does suck that there's no good way forward, But I would contact your RSM to see what kind of upgrade deals he/she can work out...
DMPS3-4K-350 Web UI Not Responding

 

DMPS3-4K-350-C, f/w1.603.4257.16448. WebUI only populates with 'status' & 'settings' tabs. Allow xpanel connection is turned on. I downloaded 'Download xpanel DMPS setup' and 'install xpanel' from the Actions pull down. Installing/running xpanel only shows xpanel with a blue background with the dreaded 'System Is Loading' message. Any ideas on how to get to the configuration pages??
Re: Processor not recognising unchanged IP table.

 

In my recent experience with that message popping up, it is typically when you are dealing with their "ethernet control" devices like the NVX Director or CEN-IO-IR4, those kinds of devices.? It looks like they are the ones that the IP table is mapping to the sequential end of list.? i.e. If you have it at IP ID 35 it shows up after F0.

I haven't really bothered looking into corrections for it, its just a click for OK, but it does remove that security layer of loading a different project into a processor.? :eeps:
--
Ryan Baldwin
CEO | XS Design Studios
rbaldwin@...
760.712.2240
Re: Issues with Sonos & Crestron

 

Sorry to keep beating a dead horse...
But is that it? ?Sonos just no longer works on an MC3? ?The thread has had no activity since the ¡®fix¡¯ was released.
We¡¯ve literally done dozens of resi setups with an MC3 and Sonos. ? Are they all just ticking time bombs ready to blow up one at a time one a magic and unknown number of favorites is exceeded? ?Is Crestron going to put on their home page a big ¡®just kidding¡¯ banner for all the folks that bought into this? ?If its just me by all means let me know and I¡¯ll shut up but this really stinks in my book.
Re: New Processor FW v1.603.0113

 

It's interesting that there's no mention of NVX in any of those
release notes about if you try to use an NVX director in the previous
1.603 firmware it screws up the IP table. I contacted tech support and
they almost immediately told me to roll back to 1.601 because of a bug
in the 1.603 firmware related to NVX directors and ip tables. Wonder
if it's fixed.

On Tue, Oct 27, 2020 at 11:48 AM Phil Bridges <gravityhammer@...> wrote:

That's not a bug - it's a feature.

On Tue, Oct 27, 2020 at 2:45 PM <payne.william@...> wrote:

/setup page stops working
Re: XPanel port 42872 workaround

 

In VT Pro, use the arrow next to the play button and "Run As"
The settings you do there are saved as part of the vtz and will be used when you next run it
18601 - 18620 of 256402