Keyboard Shortcuts
Likes
- Crestron
- Messages
Search
Optical to Dante and Dante to Digital
#dante
Any suggestions of what to convert Optical out of my TV to Dante and Dante to my Swamp24x8 (preferred digital input to Swamp).
|
Re: Samsung QE series & Samsung IP Display v1.3 driver
#samsung
I've just tried this driver again but this time on a Samsung Frame TV. This newer driver (Samsung_UN55LS03N SmartTV_3.0.000.0021IP) indeed wants the MAC address on UserAttribute_2. You just need to observer the Userattribute_n_Description signals to see what's wanted where:
UserAttribute_1_Description: The NU7, RU7 and RU9000 models do not support ArtMode commands and will ignore them.
?
UserAttribute_2_Description: This is required to turn the Display on. Please provide in the format of AA:BB:CC:DD:EE:FF
?
UserAttribute_3_Description: To configure for IP control, use TV remote and press Home button, navigate to Settings > General > Network > Expert Settings, turn on "Power On with Mobile" and enable "IP Remote" settings. Then follow Enable Instructions
?
UserAttribute_4_Description: To enable IP control, begin with TV powered on, then while driver is being loaded, look at TV for message to allow IP Remote control, use TV remote to select Allow, for control
?
UserAttribute_5_Description: Since this device uses Wake On LAN to power it on, the driver can have an extended warmup time where control may not be available for several tens of seconds. Please note this for this driver.
?
However, it won't connect (Connection_F is low). Has anyone got this working with a Samsung Frame TV? |
Re: Amazon Fire TV Cube IR File
¿ªÔÆÌåÓýHi, i?m using the Videostorm IRUSB to control FireTV via LAN. Perhaps that?s an option too: The Cube is on the list of supported devices. Cheers, Thorsten ? Von: [email protected] <[email protected]> Im Auftrag von Crestron_Programmer ? Does anyone have the IR file for the Fire TV Cube? |
Re: Lexicon MC-10
¿ªÔÆÌåÓýHow is the MC-10 as far as a processor? I¡¯ve never used it. This was chosen by the customer.?Thank You, Michael Benignus On Oct 16, 2020, at 3:56 PM, Gary Miller <g@...> wrote:
|
File /IR Drivers/Amazon FireTV.ir uploaded
#file-notice
[email protected] Notification
The following files have been uploaded to the Files area of the [email protected] group. By: Gary Miller Description: |
Re: Amazon Fire TV Cube IR File
Just loaded the driver to the files section, FYI it also works with?Nvidia Shield. On Fri, Oct 16, 2020 at 4:44 PM Tony Golden <mrgolden@...> wrote: The "IR Extender" that comes with the Fire TV Cube is a TRANSMITTER for controlling other devices, not a receiver. |
Re: Cresnet keypads becoming unresponsive
You really need to put a CHX-HUB or DIN-HUB in the system.? I usually put one in when the device count gets over 20.? The absolute maximum is something like 26 at which point you are exceeding the maximum fan out that the drivers are rated for.
But given that, I would use the Network Analyzer in tool box to check the keypads.? You can do that on the CP3 I believe however processors like the MC3 do not support that function.? It will catch things like a shorted or open Y or Z data line.? Better yet, if you have a digital oscilloscope with a serial decoder, trigger on the devices that are giving issues and see what the levels are like.? Common issue I have seen are loose connections on the power, ground, and data lines causing all types of issues -- many that are intermittent.? Even just using a DC volt meter and measure the voltage on power, ground, and data lines with respect to ground at the processor and comparing it to what you see at the keypad can help -- they both should read the same. |
Re: Amazon Fire TV Cube IR File
The "IR Extender" that comes with the Fire TV Cube is a TRANSMITTER for controlling other devices, not a receiver.
toggle quoted message
Show quoted text
Xbox or Windows Media Center IR codes work with the IR receiver Gary mentioned. --- Friday, October 16, 2020 at 5:19 PM, Crestron_Programmer wrote: |
Re: LiftMaster MyQ Garage Door openers
¿ªÔÆÌåÓýWe¡¯ve had a few discussions with Chamerlain over the years on having access to their service and providing module to the community. ?At this time we don¡¯t have anything, but I¡¯d like to change that. The more the community says they want something will certainly help demonstrate its value. ? It looks like Jay answered the IFTTT route. ? ? Caleb Radecky |
Manager, Online Products & Services ? From: [email protected] <[email protected]> On Behalf Of
ckangis
Sent: Friday, October 16, 2020 12:19 To: [email protected] Subject: [crestron] LiftMaster MyQ Garage Door openers ? Hi All, |
Re: Lexicon MC-10
The AudioControl Maestro module works for everything but inputs, I just ended up using IR for that. On Fri, Oct 16, 2020 at 2:50 PM Geoffrey Reynolds <greynlds@...> wrote:
|
Re: Amazon Fire TV Cube IR File
I used one of these on a job a couple of months ago, and it worked well. It worked out of the box, with a standard Xbox driver from the database.
toggle quoted message
Show quoted text
I've since heard that CEC also works with the Crestron CEC module, using device ID 8, although I haven't had a chance to try it. --- On Friday, October 16, 2020 at 2:54 PM, Gary Miller wrote: |
Re: Amazon Fire TV Cube IR File
Having a bunch of FireTV's, I can confirm that the remotes are BluTooth based.? Not sure if they also shoot out IR, but I doubt it.? Your best bet would be to test and try one of those IR to USB dongles that allow you to add IR control to otherwise non-IR controlled devices that have USB support.
-- Jason Mussetter Control Systems Designer Mussetter Programming Services |
Re: Amazon Fire TV Cube IR File
If you need it I have a driver. On Fri, Oct 16, 2020 at 3:39 PM Crestron_Programmer <s.marszalek11@...> wrote: Thanks Gary. So you bought the remotes too? Where did you the IR signals/file? |
Re: LiftMaster MyQ Garage Door openers
A couple of dealers I work with have used them successfully. Here's a link...
toggle quoted message
Show quoted text
-Module_p_13.html --- On Friday, October 16, 2020 at 3:30 PM, Bobby Gaede wrote: |