¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Messages
Expanded Topics Messages Polls
Date
Re: Uploading CH5

 

I set username and pass word in the TP and used -p? that? forces to ask for username and password but I still get the same error.
I tied restore also but the same result.
I'll keep trying, any idea will be welcomed.

Thanks

??
VTPro resolution for premium/high end phones? #crestron #android #app

 

Title pretty much says it all, what's the recommended resolution for developing a VTPro project for an IPhone X/11 or SAMSUNG S10/S20?

Thanks guys.
Re: Nest TStat Integration

 

Yeah Nest is pretty much done for.

Ecobee is a nice alternative. Here's the driver for it:?
Re: Uploading CH5

 

Isn't a -p needed after the -h ?
Re: Nest TStat Integration

 

That's what I thought, but had to inquire.? Thank-you,
Re: Nest TStat Integration

 

¿ªÔÆÌåÓý

Doubt you will find any modules to control Nest that work.? Google purposely eliminate 3rd party control of Nest Thermostats and encrypted the interface to keep people for hacking it.? At least that is what I read some time ago.? I am sure others will chime in if I am wrong.


On 6/25/20 1:06 PM, jholmes_crestron via groups.io wrote:

As best as I can tell this doesn't work any longer?? Specifically the one in the application market???

Any other modules out there that do work?

Jonathan

Nest TStat Integration

 

As best as I can tell this doesn't work any longer?? Specifically the one in the application market???

Any other modules out there that do work?

Jonathan
Re: NVX and DANTE on Cisco 2960-x Switches

 

Are you assigning IPs statically or using DHCP? If you're doing static, make sure the gateway defined in Dante Controller for the 352s matches what's defined in the NVX UI (I've tried doing the 0.0.0.0 that another colleague recommended but have never seen it actually work). Are any setting populating when you pull up the endpoints in Dante Controller?
Re: How to get video and audio from a new touch panel to and old IVDS and IADS

 

Unfortunately, there is no option currently to upgrade all the flats, so going all digital might not work.

There are three flats each one has it own Crestron system which communicates to the communal intercom system via inter-system communication.

The audio and video for the intercom are routed from the communal system direct to each touch panel.

Our sales guy is going to put the idea to them of upgrading the communal system, but he is anticipating push back.
Re: How to get video and audio from a new touch panel to and old IVDS and IADS

 

The short answer is Barix Annuncicom.

However, if all of the touchpanels are being replaced it might be more cost-effective (and reliable) to abandon the analog components and go all-digital. More details about the existing setup, and exactly what you're trying to accomplish, will help determine the best route.

--- On Thursday, June 25, 2020 at 11:01 AM, Simon Perks wrote:

I have been asked to update an old system, and this property has a separate
communal Crestron door entry system the communicates with each property via
intersystem communication.

The door entry system is made up of the following,
IVDS, IADS, C2N and a C2N-IIF.
The current touchpanels at the property are TPS-2000's.

What is the simplest way to get analogue audio and video to the IVDS and IADS
from the new touchpanels?
Re: Bond Bridge Pro - module

 


Thanks waffles and Michael Braithwaite!

As soon as we flush out a few issues we're having with the ceiling fan control I'll email you a copy of a small example program that includes all the modules along with some directions on getting this working.??

I greatly appreciate your offers to help with this.

The modules currently only support control.? There isn't any feedback.? According to AVMaster, who was an original beta tester of the Bond Bridge, the control portion of the API is not very reliable.? It is currently documented in the API documentation as being in beta testing.? It involves opening up a UDP connection with the bond bridge and sending a message to the Bridge every minute to keep the connection open.? Then the bridge will use this connection to send status update messages.??

Once all the control portions of the modules are working properly, if I have time I may take a shot at this.? Or, since this is just going to be a freebee posted on my Github with all the source code I may leave that up to someone else.

Thanks again.

Jay

------ Original Message ------
From: "waffles" <ad6@...>
Sent: 6/25/2020 6:15:32 AM
Subject: Re: [crestron] Bond Bridge Pro - module

Jay;

I have been using a Bond bridge with a SIT Proflame remote for my Mendota fireplace. Thus far it has been mainly basic functionality with on/off voice control via Alexa.

Please let me know how I can help.

How to get video and audio from a new touch panel to and old IVDS and IADS

 

I have been asked to update an old system, and this property has a separate communal Crestron door entry system the communicates with each property via intersystem communication.
?
The door entry system is made up of the following,
IVDS, IADS, C2N and a C2N-IIF.
The current touchpanels at the property are TPS-2000's.
?
What is the simplest way to get analogue audio and video to the IVDS and IADS from the new touchpanels?
Re: Sonos S2

 

Just to clarify what others are saying I will post below what was said in the webinar regarding each type of Sonos system.

S1 System - Will work with Simpl module and Media Player object. Will be supported by the Sonos App on the 60 series panels
S2 System - Will work with Simpl module and Media Player object. Will NOT be supported by the Sonos App on the 60 series panels
S1 & S2 mixed System - Will NOT work with Simpl module and Media Player object. Will NOT be supported by the Sonos App on the 60 series panels
Re: Sonos S2

 

Media Player integration will continue to work as-is. The built in TSW Sonos app however will no longer be able to be used once you move your players to S2, and there will be no updates to it. So you will have to rely on your mobile devices for browsing and other non-media player features.?

They hinted that the next TSW series panels will have S2 app capability so we shall see.?
Re: Bond Bridge Pro - module

 

Jay;

I have been using a Bond bridge with a SIT Proflame remote for my Mendota fireplace. Thus far it has been mainly basic functionality with on/off voice control via Alexa.

Please let me know how I can help.

Re: Trace signal in simpl

 

The "User Event Logger" symbol provides a way to log events from Simpl.?
Trace signal in simpl

 

How can trace a signal in simpl windows and log it for some time?
--
Thanks,
Alnems.
Re: Bond Bridge Pro - module

 

Hi Jay,

We would like to test this with our RTS shades and Screens that we sell at Screen Innovations.? I would love to test the module when ready.? Thanks for your work on this.
?
-Michael
Re: Bond Bridge Pro - module

 

Awesome! Jay emailed me. My project is only end of the year/beginning 2021. I need to control lots of Somfy RTS shutters throughout the house so it will be multiple Bond Bridge (4 or more) units. All the guys on the C4 forum loved it using this driver (module) =?
Re: Bond Bridge Pro - module

 

It will be available as a free download as part of an article for Residential Tech Today we're working on.? Right now we only have ceiling fans to test with.? I'd love to find someone with a bond bridge or pro bridge connected to fireplaces and somfy shades to test that functionality.??

Jay

------ Original Message ------
From: "AVMaster" <home@...>
Sent: 6/24/2020 8:11:28 PM
Subject: Re: [crestron] Bond Bridge Pro - module

Its coming. ?99% Jay and 1% myself are testing it now. ?I will defer to him on how it might be obtained once it¡¯s ready for prime time.

20621 - 20640 of 256428