Re: Tricky Problem with maybe Crosspoints

Heather Baiman

开云体育

By backup, you mean there was a copy of compiled code on the old CP3? ?I can only assume, because how else could you know they are using crosspoints.

It is possible that the program was talking to a text file on the old processor that you didn’t retrieve. Or maybe there were programs in multiple slots and you are missing the code for the other slots. Or the code you extracted was an old version that just didn’t work.?

Not sent from my flip phone

On Aug 1, 2018, at 5:36 AM, piffko@... [Crestron] <Crestron@...> wrote:

Show quoted text

Hey All,

I got a costumer who lost his source Code files, some guys programmed the system years ago and now they are lost.

Now the CP3 got Hardware issues and i had to replace it iwth a new one.?

So if i took a backup from the old cp3 and bring it to the new one, some parts of the programming seems not to work with the new processor.

in debugger it seems like they used Crosspoints for Switching the Room Controlls. It looks like the Crosspoint does not work with the new cp3.?

Any Ideas why the crosspoint programming does not work with a diffrent cp3?

Re: Tricky Problem with maybe Crosspoints

[email protected]

#228313

If you took the code from the old CP3 and loaded it to the new one then in theory it should work the same.

A couple of things you can check:

* Firmware - see if you can load the same firmware version installed in the old cp3 to the new one. Probably a long shot but there have been issues with some of the later cp3 firmware

* IP Table - I suspect this is more likely a cause for some of your issues, check that both processor IP tables are the same

Tricky Problem with maybe Crosspoints

[email protected]

#228309

Hey All,

I got a costumer who lost his source Code files, some guys programmed the system years ago and now they are lost.

Now the CP3 got Hardware issues and i had to replace it iwth a new one.?

So if i took a backup from the old cp3 and bring it to the new one, some parts of the programming seems not to work with the new processor.

in debugger it seems like they used Crosspoints for Switching the Room Controlls. It looks like the Crosspoint does not work with the new cp3.?

Any Ideas why the crosspoint programming does not work with a diffrent cp3?

Re: Toolbox Device Discovery Update

#228308

They've had this in Console (using the device to report device discovery), is this inside the device discovery tool?

Toolbox Device Discovery Update

[email protected]

#228307

Hey all, looking through the release notes on the software updates released today...

They added a pretty sweet feature to device discovery where you can discover device remotely through a control processor. ?So connect to a processor on a different VLAN than your computer and you can then discover all the devices on that VLAN. ?

Very useful. I just connected to a Pro3 at a different campus and everything on its network came right up. ?

--KG

Re: Hue Lighting Integration

[email protected]

#228306

I use Hue in my personal setup. There's a Simpl# module out there, but I have a 2-series so that wasn't an option. I just use a TCP Client to access the hue's native API to set scenes as necessary, but there's no reason you couldn't go farther with it.

That's the Hue API docs, if you have any JSON experience, it'll be super easy.

Re: Hue Lighting Integration

#228305

开云体育

Right, never suggested it should be anything like a complete lighting system. Merely curious if anybody is seeing end users put this stuff into homes where they may already have a Crestron control system and then asking for it to be integrated into the Crestron system, be it a game room or whatever.

Re: Hue Lighting Integration

#228304

"Lighting is an essential service in any building. Philips hue is an IoT diy toy. I would not even consider them.

I'd consider using them as decorative lighting in say a theater room or Outdoor area etc but certainly not as complete lighting solution"

Good thing the original post didn't say...anything...about it being a complete lighting solution.? Lol...

? - Chip

Re: MLX-3 - some questions

[email protected]

#228303

To each his or her own (opinion) or the corollary…no accounting for taste.

That said, despite the rather peculiar programming methodology, it is a good remote and it works well.

Best regards,

Tel:  561.391.1843

P.O. Box 273406 : Boca Raton, FL 33427

 <>

From: Crestron@... <Crestron@...>
Sent: Monday, July 30, 2018 4:09 PM
To: Crestron@...
Subject: [Crestron] Re: MLX-3 - some questions

"best remote Crestron has ever made", is this sarcasm?

[Non-text portions of this message have been removed]

Re: sonos line in Module V1.0

#228302

That would be great, Chap.  I unfortunately don't have access to a Playbar now, but have done a couple of systems in the past that could've really used a "TV Input" command.  I'm sure it's just a matter of time, before it comes up again :-)

Thanks!

Show quoted text

--- Monday, July 30, 2018 at 6:20 PM, Chap wrote:

Tony,

His module is a nice encapsulated html login to the sonos, it is exactly what
wireshark shows when I select line in on my pc's sonos app.  pretty slick! I
cant get mine to work, but my lab setup has stacked switches which is a big
SONOS nono.
I am going to get my boss to loan me a playbar and capture the packets.
Then send em to peter.

regards,

Chap

Re: MLX-3 - some questions

[email protected]

#228301

A bit tounge-in-cheek Dustin,

I like the weight and as a family everyone likes the way it works

We only have one in the TV room and for our purposes it does provide everything we need.

I'd much rather have an RTi though.

Re: sonos line in Module V1.0

[email protected]

#228300

Peter, seems like you really cant select line in unless live audio is present, yes?

chap

Re: sonos line in Module V1.0

[email protected]

#228299

Tony,

His module is a nice encapsulated html login to the sonos, it is exactly what wireshark shows when I select line in on my pc's sonos app.? pretty slick! I cant get mine to work, but my lab setup has stacked switches which is a big SONOS nono.

I am going to get my boss to loan me a playbar and capture the packets.

Then send em to peter.

regards,

Chap

Re: Hue Lighting Integration

#228298

Lighting is an essential service in any building.  Philips hue is an IoT diy toy.  I would not even consider them.

I'd consider using them as decorative lighting in say a theater room or Outdoor area etc but certainly not as complete lighting solution.

Re: MLX-3 - some questions

#228297

"best remote Crestron has ever made", is this sarcasm?

Re: sonos line in Module V1.0

#228296

开云体育

Probably yes, but I don't have Playbar for testing. If someone sends me a wireshark captured communication between Sonos Desktop Controller and Playbar (just right after TV input selection), I can probably make a module. The communication goes on TCP port 1400.. My email is eccovia at eccovia dot sk.

On 30.7.2018 1:06, 'Tony Golden' mrgolden@... [Crestron] wrote:

Show quoted text

?

While we're on this topic, can this module be modified to select the "TV" input on a Sonos Playbar?

Thanks!

> --- On Sunday, July 29, 2018 at 3:40 PM, Peter Jablonicky wrote:
>
> No problem with Sonos App running.
> I can take a look at Your program if You want. Just send me the archive along
> with MAC addresses and IPs of Sonos Players.
>
>
> > On 29.7.2018 20:25, chap@... wrote:
> >
> > Thanks!
> >
> > I have tried it on my test setup and it wont switch.
> > I have a sonos app running on my pc at the same time, will that screw it up?

Hue Lighting Integration

#228295

Curious if anybody is doing or seeing many requests to integrate Hue lighting systems into Crestron control systems. Anybody seeing much action in this area? Are you seeing high end homes using Hue lighting at all?

Re: Crestron Sonos

[email protected]

#228294

Subject:?Re: Crestron Sonos

The latest firmware and modules exposes an underlined "sonos" text next tot the logo. This is a URL schema ?jump to full sonos app on the ?Tsw. Then there is a return path also. Crestron App works, too this way.

…

--?

Re: sonos line in Module V1.0

[email protected]

#228292

No its in our Yahoo group files. Peter j. developed it.

Re: MLX-3 - some questions

[email protected]

#228291

Unfortunately, I find them to be rather pokey these days.  Could be modifications to recent FW initiatives?

Best regards,

Tel:  561.391.1843

P.O. Box 273406 : Boca Raton, FL 33427

 <>

From: Crestron@... <Crestron@...>
Sent: Monday, July 30, 2018 8:51 AM
To: Crestron@...
Subject: [Crestron] Re: MLX-3 - some questions

Thanks, I am loading via USB at the moment.

I don't recall the gateway uploads being particularly slow in the past. I used to do this on boats where we would have a load of MLX's.

Just need a refresher on what step I am missing.