Group series uses the same api for calendar info.

Thanks for the info. How do you get to the service menu in these?

Contact polycom. They have a module for the hdx, but not the group series.

Has anyone been able to make this work? Do you trigger the zones to turn on and switch to the doorbell by hitting the "Doorbell Enable On"? The when doorbell wav file is done, hit the "Doorbell Enable Off" to return to previous source?
Any help is appreciated.

开云体育

Thanks Chip, figured it out. Found the Q24 api and modeled after that, what a pain! I cant believe you did that all in SIMP+ ... thank god for SIMPL#!

Thank You. I wasn't aware of that.

Does anyone happen to know of an LG rs232 module that has a working volume feedback for the current crop of LCD panels. The various modules available all work for control and basic feedback, but the volume fb ramp just sits at 0d. I checked the modules posted on the group and those didn't work for volume fb either. Anyone come across a module where this works? We are using the MB-P10 keypads in some rooms with these and actual volume fb would be nice for the ramp graphic above the knob. There isn't a way I know of to directly set volume on the tv at startup so I could make a simulated feedback, or to read current volume level in any format I know of. Curious if anyone found one that works. For reference the model we are using is an LG 55lw340c

-Ilya

开云体育

So, UPDATE, for anyone else trying to get these to work. There is apparently a service menu on the particular display I am working with that includes a setting for 'auto off' when no video is present. It's set at a ridiculous delay of like 2-3 seconds by default.

The setting overrides any 'eco' settings in the regular menu, so basically in a nutshell... Try the settings in the regular menu all you want for the obnoxious instant shutoff, nothing will work until you set it in the hidden menu.

Also, tile commands will not work when the set is off, so I would turn the set on, issue commands, and then go to issue a second set of commands, only to find the set would refuse them. Working remotely, I couldn't get the full picture of what was actually happening.

Once I got that rectified everything worked fine.

This has been fixed in Smart Graphics 2.12.12.3 FYI and was released 2/22/17

Have you found a solution to this?

I've heard that MS is very strict on the UI for S4B, that is the reason that RL2 has to "flip" between S4B control and room control. ?I haven't been very impressed on the S4B UI in RL2 myself, has some things that just don't work like they should. ?I have interfaced room camera systems with the RL2 using Vaddio AV Bridge to convert the HDMI and Audio to USB. ?

I have my own module I've been using for the dozens of Sharps I've done, and until recently that's pretty much all we've used. I have an "enable polling" digital I almost never use, with a pacing parameter defaulted to 6s. I've never had an issue on any model but the 661, with IP or serial. The only polling I do no matter what is a single delayed power poll to confirm true FB after a power on/off.

Thanks for the suggestion and I'll take a look at the timing, but the pair I got called about today have been fine for the last year and a half or so, and now every time you turn them back on you get No Signal until you cycle power.

I wish they hadn't sold off and just kept making the 745 or whatever it was. We've been having good luck with Samsung DM even though setting up Roomview Connected is kinda clunky and the pictures on a pair of them don't even remotely match out of the box.

I don't believe in luck but apparently I jinxed myself. Two more went down today, but at least they're only (both) in a private executive conference room...