My programming template on github includes a swamp for the house audio system. ?That may be useful as a programming example.
Jay
------ Original Message ------
Sent: 2/22/2017 7:47:56 PM
Subject: [Crestron] Re: SWAMP-24X8
?
I know it is simple, and I read the brochure already. It is not like I am being lazy, I am working in a really complex system, in which I was supposed to spend like two weeks of programming, but I only have 2 more days, I am not eating, not sleeping, and english is not my main language as you can see, that's why I asked, because you guys are so nice every time I need some help, so I thought someone would already have this program, and could help me by sharing it.
|
I know it is simple, and I read the brochure already. It is not like I am being lazy, I am working in a really complex system, in which I was supposed to spend like two weeks of programming, but I only have 2 more days, I am not eating, not sleeping, and english is not my main language as you can see, that's why I asked, because you guys are so nice every time I need some help, so I thought someone would already have this program, and could help me by sharing it.
|
Just out of curiousity, when your streaming cameras externally, is there a way to use the controller as a proxy so you do not need to open ports to each camera?
On Wed, Feb 22, 2017 at 5:19 PM, steve@... [Crestron] <Crestron@...> wrote:
?
I don't know if you've looked in the help section of Crestrons website yet but, if you search for "streaming" it should bring up some documents that show the best rtsp/mjpeg settings to use for specific brands/models. I'm not sure if hikvisiin is in there, but it would be worth a look for sure
IMO, though, you are better off using mjpeg with the Crestron app. I have 8 cams in my system and the 7 that don't support rtsp take about a second or two to start streaming. The one that uses rtsp used to take about 5-6 seconds to load but has been taking a good 12-15 seconds to load lately.
|
had to troubleshoot a swamp system the other day for the first time... and yes... reading the help file is best way to learn it.
|
Re: Sharp LC60LE661U volume ramp issue.
Just a heads up, be prepared to do a power cycle every once in a while to bring the monitor back from the dead. FW updates, service menu resets, nothing works but pulling the power out of the wall and plugging it back in.
It's disappointing since this is the last usable non-PNL Sharp but it's happened to every one we installed and nothing has fixed any of them, including RMA replacement. I hope you have better luck, but we've stopped using Sharp for anything but interactives.
|
Re: setup view of this forum
Slack could be a handy platform. Different than yahoo by a large stroke, but free and scales --?
Shane Springer President Red Team Research Group
|
Re: setup view of this forum
If you didn't already know, I?took over the /r/Crestron subreddit about 8 months ago and cleaned the place up a bit. The userbase there has been steadily growing. (as of now, 800 subscribers and around 14,500 pageviews last month) Being Reddit, I understand it's probably in a lot of corporate filters as being a bad website, but it's another possible resource for us programmers. Obviously not a place to discuss Labs stuff, or anything that should be kept out of full public view.
Also last month I started a second subreddit called /r/AVAutomation for a more platform agnostic discussion. I've been on recently and it is dead, seriously dead, which is a fairly decent loss to us AMX guys (or at least those who still haunt the place). I'm throwing this out here so that if you're an AMX programmer or Extron programmer or Control4 or whatever you do that doesn't necessarily fall under the Crestron umbrella, there's a place to discuss that and ask questions of other industry professionals. /r/AMX is a deserted wasteland and /r/Extron equally so. /r/Control4 seems to be marginally active. Unless there's somewhere else I don't know about, there's not much place for non-Crestron discussion.
This is just more places to be able to reach other programmers. And technically not a forum...so, yeah.
On Wed, Feb 22, 2017 at 5:46 PM, Joe Vossen jkvossen@... [Crestron] <Crestron@...> wrote: Slack is a nice/usable platform, but like you said,? moving the existing content would be painful.
Time to set my clock.....
> On Feb 22, 2017, at 8:33 PM, steve@... [Crestron] <Crestron@...> wrote:
>
> It'll never move, until it ceases to exist, because there's no real way to move the content that is here.? If the day comes then the only real solution (IMO) would be to build a new forum from scratch which would require hosting services, board software, and a (preferably) it's own domain.? All of which requires time and money.? Or Crestron could be generous and create a "public" section of Labs for this to migrate to...yeah, that will never happen ?
>
> ------------------------------------
> Posted by: steve@...
> ------------------------------------
>
>
>
> Check out the Files area for useful modules, documents, and drivers.
>
> A contact list of Crestron dealers and programmers can be found in the Database area.
>
> ------------------------------------
>
> Yahoo Groups Links
>
>
>
------------------------------------
Posted by: Joe Vossen <jkvossen@...>
------------------------------ ------
Check out the Files area for useful modules, documents, and drivers.
A contact list of Crestron dealers and programmers can be found in the Database area.
------------------------------ ------
Yahoo Groups Links
<*> To visit your group on the web, go to:
? ?
<*> Your email settings:
? ? Individual Email | Traditional
<*> To change settings online go to:
? ?
? ? (Yahoo! ID required)
<*> To change settings via email:
? ? Crestron-digest@yahoogroups.com
? ? Crestron-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
? ? Crestron-unsubscribe@yahoogroups.com
<*> Your use of Yahoo Groups is subject to:
? ?
|
Re: setup view of this forum
Slack is a nice/usable platform, but like you said, moving the existing content would be painful.
Time to set my clock.....
toggle quoted message
Show quoted text
On Feb 22, 2017, at 8:33 PM, steve@... [Crestron] <Crestron@...> wrote:
It'll never move, until it ceases to exist, because there's no real way to move the content that is here. If the day comes then the only real solution (IMO) would be to build a new forum from scratch which would require hosting services, board software, and a (preferably) it's own domain. All of which requires time and money. Or Crestron could be generous and create a "public" section of Labs for this to migrate to...yeah, that will never happen ?
------------------------------------
Posted by: steve@...
------------------------------------
Check out the Files area for useful modules, documents, and drivers.
A contact list of Crestron dealers and programmers can be found in the Database area.
------------------------------------
Yahoo Groups Links
|
Re: setup view of this forum
It'll never move, until it ceases to exist, because there's no real way to move the content that is here. If the day comes then the only real solution (IMO) would be to build a new forum from scratch which would require hosting services, board software, and a (preferably) it's own domain. All of which requires time and money. Or Crestron could be generous and create a "public" section of Labs for this to migrate to...yeah, that will never happen ?
|
Re: setup view of this forum
Ugh. I hate the Facebook format.
?
The thing I love about this group is every email comes
directly to my inbox, so there's I lot I've learned over the years just "Next
unread message" even if its a thread I wouldn't have paid attention to if I had
to go into it. Plus I can just hit "Reply" and type. On the facebook groups that
I am a member of it's clumsy, easy to miss responses, etc., etc.
--
Lincoln King-Cliby, CTS,
DMC-E-4K/T/D
Commercial Market Director
Sr. Systems Architect | Crestron Certified Master Programmer (Gold)
Crestron Services Provider | Biamp Audia Certified | Extron Control
Professional
?
toggle quoted message
Show quoted text
Not
changeable that I know of, and yes it bugs me too.? I personally hate the
format of Yahoo groups.? Yes this is the only reason that I have a yahoo
account still active after all these years. With that said, why don't YOU
suggest to the group to move to a different platform.? ;)? (or you can
wait until daylight savings starts so we can synchronize our clocks once and be
done with it). Who knows, down the road, we may be forced to change
platforms since Yahoo is in the process of being bought out, and don't know if
groups will continue down the road with new owners.? If that happens, as
long as the consensus isn't to move over to some Facebook group where you need a
facebook account to access, I'll be happy. -jason
|
Re: setup view of this forum
Not changeable that I know of, and yes it bugs me too.? I personally hate the format of Yahoo groups.? Yes this is the only reason that I have a yahoo account still active after all these years.
With that said, why don't YOU suggest to the group to move to a different platform.? ;)? (or you can wait until daylight savings starts so we can synchronize our clocks once and be done with it).
Who knows, down the road, we may be forced to change platforms since Yahoo is in the process of being bought out, and don't know if groups will continue down the road with new owners.? If that happens, as long as the consensus isn't to move over to some Facebook group where you need a facebook account to access, I'll be happy.
-jason
|
I don't know if you've looked in the help section of Crestrons website yet but, if you search for "streaming" it should bring up some documents that show the best rtsp/mjpeg settings to use for specific brands/models. I'm not sure if hikvisiin is in there, but it would be worth a look for sure
IMO, though, you are better off using mjpeg with the Crestron app. I have 8 cams in my system and the 7 that don't support rtsp take about a second or two to start streaming. The one that uses rtsp used to take about 5-6 seconds to load but has been taking a good 12-15 seconds to load lately.
|
Controlling the SWAMP24x8 is pretty self explanatory. Have you looked at the help file for it in Simpl?
I hate to be "that guy" who tells you to read the help file, but I feel like a lot of the "example program" requests we see here are more or less people being lazy looking for code to copy and paste rather than learning how and why things are done. I'm not accusing you of doing this, I've just noticed a lot of requests from people for example programs for things that would take less time to figure out just by reading the help file for the device.
|
https://youtu.be/gm0mJ2wpA38
https://youtu.be/F6MbW9ZX9D4
On Feb 22, 2017 11:19 AM, "cyberbri24@... [Crestron]" <Crestron@...> wrote:
?
Hi all!
Been doing mostly commercial work for a the past 8 years, but have a resi job that the client wishes for TV to be ceiling mounted over a kitchen sink counter with the ability to swivel around to the kitchen table area. The client also wishes the back of the TV to be covered in way to hide the back of the display, wiring, RMC black box, etc. Looking for something around 28-32" in screen size but not having very good luck finding product out there. Has anyone worked with any custom brand they might want to recommend please??
Thanks, Cyberbri
|
toggle quoted message
Show quoted text
On Feb 22, 2017 11:19 AM, "cyberbri24@... [Crestron]" <Crestron@...> wrote:
?
Hi all!
Been doing mostly commercial work for a the past 8 years, but have a resi job that the client wishes for TV to be ceiling mounted over a kitchen sink counter with the ability to swivel around to the kitchen table area. The client also wishes the back of the TV to be covered in way to hide the back of the display, wiring, RMC black box, etc. Looking for something around 28-32" in screen size but not having very good luck finding product out there. Has anyone worked with any custom brand they might want to recommend please??
Thanks, Cyberbri
|
Topics in Home Automation - New Blog Entry
Just a quick note to let you know that I've added a new blog entry to my blog, Topics in Home Automation. ??
Making your Automation System Guest Friendly
Here is a summary of the topics I've covered in my blog 2/15/17 ? ? ?- Risky Automation 2/8/17 ? ? ? ?- Finding the Right Partners 2/1/17 ? ? ? ?- Tricks and Hacks 1/25/17 ? ? ?- Water Management and Automation 1/18/17 ? ? ?- Improving Security with Automation 1/13/17 ? ? ?- Cutting the Chord Update 1/11/17 ? ? ?- Networking and IoT Device Integration 1/4/17 ? ? ? ?- ?Automating Shades, and Drapes 12/27/16 ? ?- ?Notifications - Getting Informed When Events Occur in Your Home 12/20/16 ? ?- ?Cutting the Chord 12/12/16 ? ?- ?Lighting Control and Automation 12/7/16 ? ? ? -?Working With IFTTT - If-This-Then-That 11/30/16 ? ?- Controlling Your Automation System 11/16/16 ? ?-?Heating, Ventilation, and Air Conditioning Automation (Example Crestron code can be found at?) 11/9/16 ? ? ?- How do Traditional Automation System Dealers Transition to IoT 11/2/16 ? ? ?- ?Integrating the Internet of Things into your Automation System 10/26/16 ? ?- Saving Energy Through Automation 10/19/16 ? ?- Choosing an Automation Processor / Hub 10/12/16 ? ?- Making Your Home Safer 10/5/16 ? ? ?- Developing an Automation System through Use Cases 9/27/16 ? ? ?- Is the House Occupied or Not 9/25/16 ? ? ?- Podcast 9/21/16 ? ? ?- Act Like a Pro - document your code and your systems (code, network, automation, security hardware) 9/14/16 ? ? ?- Automation vs. Control 9/7/16 ? ? ? ?- Introduction
I hope you find the information useful
Thanks
Jay
|
Hi guys,?
I am programming a SWAMP-24x8 for the first time. Does someone has an example code of how to program it?
Thanks
|
what rtsp cameras work well with crestron app?? we use hikvision and openeye and it takes 20 to 30 seconds to get an image remotely.? extremely ridiculous and embarrassing, and brands tips and settings would be most helpful.
|
To add to that, you can also use the word 'show' at the start of most commands to query the current state of the switcher.
Example:
show input 1 name Returned string: event input 1 name PC
Example:
show output 1 route Returned string:?event output 1 route 1
- Sam
|
Re: Crestron Mobile App not working
Thanks again,
I will check tonight when I get home to see about the port configuration. ?I will post screenshots tomorrow if I still can't get it going.
I really appreciate you taking the time to help me with this,
Brian
|
Steve McNally