¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Messages
Expanded Topics Messages Polls
Date
Re: Debugger digital signal indicators

 

"shame we just couldn't have an option to switch between the familiar and the 'progressive'"

Sadly that would require a software dev team that thought...progressively...? :)

? - Chip
Re: Fusion room

 

Is your Fusion server licensed?? It will only work for 5 rooms (selected at random apparently) until it's licensed.

On Sat, Jan 14, 2017 at 3:25 PM, mervatsaid33@... [Crestron] <Crestron@...> wrote:
?

Hi guys,
1- I have system using. Dmps 300-c (more than 10)
2- I make program have fusion room and room view
3- 5 out of 10 not work right with fusion only
4- work good with room view
5- dmps remaining is work good with fusion
Problem is
No data send from fusion
Feedback is ok
Only in some dmps

Any one can help me to solve this problem



Re: Crestron - SmartThings Integration Code is Now on Github

 

Really looking forward to testing this :-)
Re: PTZ cameras via IP (FlexWATCH)

Matias Alcocer
 

I have dealt with flexwatch cameras before. I'm out of the country right now but send me an email to malcocer at macautomated dot com to remind me and I will send you the commands for PTZ and presets.

Matias




On Saturday, December 17, 2016, 10:19 PM, jwinn@... [Crestron] wrote:

?

Anybody ever dealt with FlexWATCH cameras?


I've got some strings that we've captured using the browser interface of the cameras, but can't seem to get them to work via SIMPL (or Debugger).


For example - this string works if I paste it into a browser and hit enter.



Nothing loads into the browser, but the camera moves (the "107" happens to be the UP command).


The same string sent via Debugger, with an added "\n" generates a "400 page not found" error, but does not move the camera.


I've got my TCP symbol set to the same (10.0.4.130) address, and port 80. The connect_fb is high. I've tried adding a :80 into the string. I've tried removing the IP info and starting with /goform... I've tried sending commands when my browser is not also connected to the camera. I've tried 700 other variations too.


The browser interface for these cameras requires an ActiveX plugin, but I've successfully sent direct commands by pasting them into Chrome as well.


The preset recall commands require an admin login, which pops up in my browser and then the command does work. The PTZ commands do not require a login and just work in a browser (tried it in multiple browsers which were definitely not already logged in).


My problem may be that I'm misunderstanding TCP control of a device that's only meant to be controlled by its own web interface. Any ideas?


Josh Winn

The LiquidPixel Group
Re: Latest version of Samsung EXlink protocol

 

¿ªÔÆÌåÓý

Thank you.? That's what I was hoping to hear.? It wouldn't have been a problem to edit the commands.? My worries were if they were different and not available.? Plus it's nice to just swap it out and have it just work.
?
In a message dated 1/15/2017 5:34:24 P.M. Eastern Standard Time, Crestron@... writes:

?

As recently as this summer I¡¯ve used the ¡°original¡± EX-Link commands on both consumer and hospitality displays that have EX-Link ports on them. If there have been changes the core functions (power, input select, volume) have not changed.

--

Lincoln King-Cliby, CTS, DMC-E-4K/T/D

Commercial Market Director

Sr. Systems Architect | Crestron Certified Master Programmer (Gold)

ControlWorks Consulting, LLC

Crestron Services Provider | Biamp Audia Certified | Extron Control Professional

From: Crestron@... [mailto:Crestron@...]
Sent: Sunday, January 15, 2017 3:39 PM
To: Crestron@...
Subject: Re: [Crestron] Re: Latest version of Samsung EXlink protocol




That is what I am currently using for the old panel.? I hope it did not change.? I guess plug and play is the only way to know for sure.? It will suck to buy the tv and find out later that protocol has changed and no one has it.? Thanks,

Chip

In a message dated 1/15/2017 2:22:22 P.M. Eastern Standard Time, Crestron@... writes:

?

Try these:

Power Off??? 08 22 00 00 00 01 D5
Power On??? 08 22 00 00 00 02 D4
Re: Latest version of Samsung EXlink protocol

 

¿ªÔÆÌåÓý

As recently as this summer I¡¯ve used the ¡°original¡± EX-Link commands on both consumer and hospitality displays that have EX-Link ports on them. If there have been changes the core functions (power, input select, volume) have not changed.

?

--

Lincoln King-Cliby, CTS, DMC-E-4K/T/D

Commercial Market Director

Sr. Systems Architect | Crestron Certified Master Programmer (Gold)

ControlWorks Consulting, LLC

Crestron Services Provider | Biamp Audia Certified | Extron Control Professional

?

From: Crestron@... [mailto:Crestron@...]
Sent: Sunday, January 15, 2017 3:39 PM
To: Crestron@...
Subject: Re: [Crestron] Re: Latest version of Samsung EXlink protocol

?




That is what I am currently using for the old panel.? I hope it did not change.? I guess plug and play is the only way to know for sure.? It will suck to buy the tv and find out later that protocol has changed and no one has it.? Thanks,

Chip

?

In a message dated 1/15/2017 2:22:22 P.M. Eastern Standard Time, Crestron@... writes:

?

Try these:

Power Off??? 08 22 00 00 00 01 D5
Power On??? 08 22 00 00 00 02 D4
Re: Crestron Today issues

 

Hey Matt,



I hear you, happens to me all the time too! You¡¯re welcome.



I didn¡¯t see you mention this in your first post, so please check for the watch, make sure you have right-clicked on the Crestron App IP-ID in program view, to insert the ¡°Crestron App Watch Functions¡± extender. Same signals as the Crestron App Notifications that appear automatically in Slot-2 of the IP-ID you have dropped the Crestron App on to. They can use the same Analogs and Serials, but you will get an error if you match names for the Digitals signals.



Thank you,

Trey Chamrad - Texas Audio Video Integration

3217 Ranch Road 620 N. | Austin, TX 78734

1965 Post Road #502 | New Braunfels, TX 78130

855.55.TUNES <tel:%28855-558-8637> (855-558-8637)

512.771.9183 cell

"control your home & business."





From: Crestron@... [mailto:Crestron@...]
Sent: Sunday, January 15, 2017 6:01 AM
To: Crestron@...
Subject: [Crestron] Re: Crestron Today issues





Hi Trey

Haha, knew it would be something simple! I've never even been all the way to the bottom of the app!! Thanks for the heads up

Works well now on the phone in the notification view window, but just shows "connected" on the watch with ten blue buttons - none of which show any text, icons, or push joins to the processor.

Will try some more Googling and testing, at least i am 50% there now..
Re: Latest version of Samsung EXlink protocol

 

I would be surprised if it has changed.?

On Jan 15, 2017 3:39 PM, "stefuel@... [Crestron]" <Crestron@...> wrote:
?

That is what I am currently using for the old panel.? I hope it did not change.? I guess plug and play is the only way to know for sure.? It will suck to buy the tv and find out later that protocol has changed and no one has it.? Thanks,
Chip
?
In a message dated 1/15/2017 2:22:22 P.M. Eastern Standard Time, Crestron@... writes:
?

Try these:

Power Off??? 08 22 00 00 00 01 D5
Power On??? 08 22 00 00 00 02 D4
Re: Latest version of Samsung EXlink protocol

 

¿ªÔÆÌåÓý

That is what I am currently using for the old panel.? I hope it did not change.? I guess plug and play is the only way to know for sure.? It will suck to buy the tv and find out later that protocol has changed and no one has it.? Thanks,
Chip
?
In a message dated 1/15/2017 2:22:22 P.M. Eastern Standard Time, Crestron@... writes:

?

Try these:

Power Off??? 08 22 00 00 00 01 D5
Power On??? 08 22 00 00 00 02 D4
Re: Latest version of Samsung EXlink protocol

 

Try these:

Power Off??? 08 22 00 00 00 01 D5
Power On??? 08 22 00 00 00 02 D4
Latest version of Samsung EXlink protocol

 

What I have is 5 years old. ?I have to replace a UN60ES7500 with a new UN65KS9800. ?Tried contacting Samsung tech support which resembled talking to a wall. ?All I got out of the conversation was the protocol had changed since 2012. ?They said they would initiate a request for that information and forward it to me via email. ?Checked my email and after waiting three days, they sent me a password reset. ?Anyone have the latest version. ?Actually, I only need on and off to work. everything else is handled elsewhere. ?Thanks, ?Chip
Re: Alternative to Atlona?

 

Hi!

For more info about Absolute products, please, send an email to Horst Wallwitz h.wallwitz@...?
He is the Sales Chief Engineer and is based in Miami.

Best Regards!

Em domingo, 15 de janeiro de 2017, grankin@... [Crestron] <Crestron@...> escreveu:

?

Is there an MSRP on either the Absolute Acoustics NDS-UHM88 or the Pulse Eight neo:Modular 8x8 w/HDBaseT Pro?



--
Leandro Fernandes
Skype: Lefernandesrj
Tel.: (11) 94821-1114
How to launch an application from within iPad GUI?

 

Hello All,


could you explain how to launch an App on iPad from my GUI?


Client wants to run application for Karaoke and then go back into GUI.


Thanks.

Dmitry
Re: Alternative to Atlona?

[email protected]
 

Is there an MSRP on either the Absolute Acoustics NDS-UHM88 or the Pulse Eight neo:Modular 8x8 w/HDBaseT Pro?
Domoticz

[email protected]
 

Hi,?


i am new to crestron,


for my house i am now using domoticz for using zwave.


Somebody who is also using domoticz and crestron together?


Thanks
Re: Crestron Today issues

 

Hi Trey

Haha, knew it would be something simple! I've never even been all the way to the bottom of the app!! Thanks for the heads up

Works well now on the phone in the notification view window, but just shows "connected" on the watch with ten blue buttons - none of which show any text, icons, or push joins to the processor.

Will try some more Googling and testing, at least i am 50% there now..
Re: Filezilla to a TP

 

WinSCP is much better than FileZilla. You can set up PuTTY with it, so you can use WinSCP to FTP the file to the panel and then SSH into it and load the project.

On Fri, Jan 13, 2017 at 7:40 AM, Joseph Vossen jkvossen@... [Crestron] <Crestron@...> wrote:
leave it to Chip to bring me back to earth¡­...


> On Jan 13, 2017, at 9:07 AM, chipmoody@... [Crestron] <Crestron@...> wrote:
>
>
> "you can put an entry in your address book:
>? ? ? ?? ? ? ? ? auto <LAN addr of proc>; pat auto,,port"
>
> Everyone is missing where the OP was asking about NON-Toolbox apps...? :)
>
>? ?- Chip
>
>



------------------------------------
Posted by: Joseph Vossen <jkvossen@...>
------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.

------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
? ?

<*> Your email settings:
? ? Individual Email | Traditional

<*> To change settings online go to:
? ?
? ? (Yahoo! ID required)

<*> To change settings via email:
? ? Crestron-digest@yahoogroups.com
? ? Crestron-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
? ? Crestron-unsubscribe@yahoogroups.com

<*> Your use of Yahoo Groups is subject to:
? ?


Crestron - Logitech Harmony Hub Integration

 

Does anyone know of any drivers for integrating a Crestron system with a Logitech Harmony Hub? ?Currently I'm doing this through IFTTT but a direction connection would be a little cleaner/faster. ?I've done a google search but haven't come up with anything. ?I thought I would ask the group in case there is something I missed.

Thanks

Jay
Re: Move to Pyng?

 

Thanks. ?I realize it was referencing pyng but it also asked for better ways of handling opening/closing of shades based on time of year and as pyng is a closed environment I figured a suggestion that incorporated code running on a separate processor that could be linked into pyng would be a welcome suggestion.

Jay

------ Original Message ------
From: "bryn@... [Crestron]" <Crestron@...>
Sent: 1/14/2017 5:58:01 PM
Subject: Re: [Crestron] Re: Move to Pyng?

?

That post was referencing Pyng, which won't work with that, but it's pretty cool nonetheless!
Re: Move to Pyng?

 

That post was referencing Pyng, which won't work with that, but it's pretty cool nonetheless!
37301 - 37320 of 256428