¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
Date

Re: SIMPL Compilation error

 

This may sound a bit strange but have you installed Studio?
I un-installed it a while ago and Simpl started throwing errors when compiling, re-install studio and it started working again


Re: OT: MS OneDrive

 

I have been using it since February and it has been working great for me. The only reason I ever pause syncing is if I am tethered to my phone. Have not had any weird compile issues. I use it to sync my laptop and 2 desktops.?


Re: 3 Series Multiple Programs - Tips, Tricks and Issues

 

Wow, I didn't know they went back to the Amiga. ?In v11, they put in something I'd been wanting for a long time - a separate navigation bar for each lister rather than a common one. ?I was thinking if a script could be written maybe using power shell and that SDK Crestron released to FTP a file over and then do the progload command.


Avielo optix SuperWide 235 Barco/ProjectionDesign

 

Dear all,


Does anyone have the RS-232 or TCP/IP crestron driver for the Avielo Optix SuperWide 235 Barco/ProjectionDesign projector? Or can I use a similar driver that would work?


Many thanks for your help.


Dan

?


Re: SIMPL Compilation error

 

Thanks for that. I think I must have every file in every folder now and still no joy. Anyone else have any bright ideas?


Re: New DSP

 

I agree with all of the above posters regarding the Tesira Line. One thing to keep in mind if you are planning on creating a room standard is that Biamp is planning on phasing out the Nexia line very soon, atleast this is what I was told during Infocomm14 at the Biamp booth. Tesira line will be replacing it. Great product.

Brett Heroux


Re: QSYS 500i (manufacturer supplied modules)

 

It's in the Qsys help file...? Search for external control protocol

On Fri, Sep 26, 2014 at 2:08 PM, trayschaeffer@... [Crestron] <Crestron@...> wrote:
?

I am working on a Qsys system also. Where did you find the protocol?

Some things aren't clear from ripping apart the factory modules...

?

Tray



Re: QSYS 500i (manufacturer supplied modules)

 

I am working on a Qsys system also. Where did you find the protocol?

Some things aren't clear from ripping apart the factory modules...

?

Tray


Re: New DSP

Andrew Welker
 

One nice feature of the TesiraFORTE line is the USB I/O. You can connect it up to a computer that is running Skype or Lync and then use that application to do your conferencing, using the far superior AEC and processing available in the TesiraFORTE instead of the processing in the PC. You can run up to 8 channels of audio through the USB connector in either direction.

On Fri, Sep 26, 2014 at 3:05 PM, Bob Smith sbob1123@... [Crestron] <Crestron@...> wrote:
?

We work with both systems and the Biamp is by far superior.? We are currently installing The Biamp Tesira line and it is far superior in AEC convergence for ACS and VCS applications, it is also far superior when it comes to feedback suppression for voice lift scenarios.? Clearone is also out to lunch in there costing right now.? AVB provides super flexibility for large systems or for application where you need to install external mods in a teaching podium for example.? Crestron integration is a breeze!!


On Friday, September 26, 2014 12:24 PM, "kellyhman@... [Crestron]" <Crestron@...> wrote:


?
We are looking at voice and program plus the Crestron app. ? VTC would be another application also.





--
In Him,
Andrew Welker



Re: New DSP

Bob Smith
 

We work with both systems and the Biamp is by far superior.? We are currently installing The Biamp Tesira line and it is far superior in AEC convergence for ACS and VCS applications, it is also far superior when it comes to feedback suppression for voice lift scenarios.? Clearone is also out to lunch in there costing right now.? AVB provides super flexibility for large systems or for application where you need to install external mods in a teaching podium for example.? Crestron integration is a breeze!!


On Friday, September 26, 2014 12:24 PM, "kellyhman@... [Crestron]" wrote:


?
We are looking at voice and program plus the Crestron app. ? VTC would be another application also.



Re: Prowl for Crestron 3 Series is posted!

 

I am very interested in this module and how prowl works.
I am looking at the website and am trying to understand it all.
If you have the programming in....do you then install prowl app on the iphone and or mac for the notifications?

Could you send and or post your module.


Re: Logic Question

 

Thanks for the help guys, never knew the press-n-hold could work for this. ?


Re: New DSP

 

We are looking at voice and program plus the Crestron app. ? VTC would be another application also.


Re: New DSP

 

+1 for TesiraFORTE.? So much less headache controlling them from Crestron as they allow for subscription feeback.

On Fri, Sep 26, 2014 at 10:05 AM, sound.scan@... [Crestron] <Crestron@...> wrote:
?

We've started using the TesiraFORTE AI and VI (both the AVB and non-AVB versions) for a variety of projects. A nice little DSP swiss army knife. The AVB version allows for a lot more flexibility. Rock solid so far--which has consistently been the case with Biamp for us. They are 3-4X as powerful as the older Nexia line we were using on almost every project. That said, the Nexias still work great as well--depending on the project requirements.



Re: New DSP

 

We've started using the TesiraFORTE AI and VI (both the AVB and non-AVB versions) for a variety of projects. A nice little DSP swiss army knife. The AVB version allows for a lot more flexibility. Rock solid so far--which has consistently been the case with Biamp for us. They are 3-4X as powerful as the older Nexia line we were using on almost every project. That said, the Nexias still work great as well--depending on the project requirements.


Re: URC MX850

Heath Volmer
 

¿ªÔÆÌåÓý

Thanks!

On Sep 26, 2014, at 9:58 AM, Jared Ross jaredlross@... [Crestron] <Crestron@...> wrote:


Sent

On Fri, Sep 26, 2014 at 11:21 AM, Heath Volmer?hvolmer@...?[Crestron]?<Crestron@...>wrote:
?

Can anyone send me the 850 software/template?? My URC account is not letting me in, and I'm on crunch-time with another job.? Guy is heading to the site in a while and he might get bit by the main page problem. ? I would be very grateful!

hvolmer at ddsys dot CO (no m)



On Sep 26, 2014, at 8:57 AM, Jeff walkinshaw?jeffwalkinshaw@...?[Crestron] <Crestron@...> wrote:


Send the template file first in the mx-850 editors then the the vtp file. This will make the main buttons work


On Sep 26, 2014, at 9:20 AM, Neil Dorin?neildorin@...?[Crestron] <Crestron@...> wrote:

?

IIRC the issue with the main pages not working has to do with the default behaviour on the MX-850 being press and hold to execute commands on the first page, while a quick press just page flips to the device control page.? It was a way for users to jump between devices without having to wait for a macro to finish of the system was already in the state they wanted (say switching from DVD to lighting and back).?

I can't recall if there is a menu option to suppress the press and hold time on the 850?


On Sep 26, 2014, at 7:43 AM,?ted_brincka@...?[Crestron] <Crestron@...> wrote:

?

I tried this years ago. The method I heard of was to plug in an ML600, let Toolbox recognize it and then swap out the MX850 before you load it. If I remember correctly, everything worked except the MAIN pages. They would not send any presses out. I have heard of others getting it working but don't know the method they used.








--?
?
Jared Ross
914-906-0061
?



Re: URC MX850

 

Sent

On Fri, Sep 26, 2014 at 11:21 AM, Heath Volmer hvolmer@... [Crestron] <Crestron@...> wrote:
?

Can anyone send me the 850 software/template?? My URC account is not letting me in, and I'm on crunch-time with another job.? Guy is heading to the site in a while and he might get bit by the main page problem. ? I would be very grateful!

hvolmer at ddsys dot CO (no m)



On Sep 26, 2014, at 8:57 AM, Jeff walkinshaw jeffwalkinshaw@... [Crestron] <Crestron@...> wrote:


Send the template file first in the mx-850 editors then the the vtp file. This will make the main buttons work


On Sep 26, 2014, at 9:20 AM, Neil Dorin?neildorin@...?[Crestron] <Crestron@...> wrote:

?

IIRC the issue with the main pages not working has to do with the default behaviour on the MX-850 being press and hold to execute commands on the first page, while a quick press just page flips to the device control page.? It was a way for users to jump between devices without having to wait for a macro to finish of the system was already in the state they wanted (say switching from DVD to lighting and back).?

I can't recall if there is a menu option to suppress the press and hold time on the 850?


On Sep 26, 2014, at 7:43 AM,?ted_brincka@...?[Crestron] <Crestron@...> wrote:

?

I tried this years ago. The method I heard of was to plug in an ML600, let Toolbox recognize it and then swap out the MX850 before you load it. If I remember correctly, everything worked except the MAIN pages. They would not send any presses out. I have heard of others getting it working but don't know the method they used.







--
?
Jared Ross
914-906-0061
?


Re: New DSP

 

I've had good experience with the BiAmp.? If you go that direction I'd start by looking at the Nexias.? They have several variations depending on what you're doing.

Are you just looking for program audio + voice reinforcement + Crestron Control or are you looking to have a remote learning and/or video conferencing component in them as well??


Vizio XRT510 or M series IR Codes Needed

 

Hey guys and gals!!! ?Would anyone happen to have an ir driver for the vizio "M" series tv's?? Thaks in advance!!!


Re: Logic Question

 

"Press and hold is a pulse on held output..."

Pulse is only on the "Not Held" output.? The held output follows the input state after the appropriate delay.

Looks like it fits the OPs need, and without S+...

? - Chip