开云体育

Hi Chip,

Thanks for responding.

I removed ALL the ethernet devices and removed the networktime sync and it still does it. Exactly once a minute.

Really annoying.

Maybe its time to ask trueblue cuz i have no way of knowing what this error means or what to diagnose.

Why in the world something on crestron would need to disable the Nagle algorithm and then what would cause it to not be able to is just a mystery.

Im now wondering if something from the outside is causing this error, maybe something on the network is sneding something to its IP address and causing this ?

--- In Crestron@..., "Chip" <cfm@> wrote:

What devices do you have configured in your program on the Ethernet interface?

- Chip


--- In Crestron@..., "xymox1357" <public2@> wrote:

Im seeing these once a minute in the log and im not sure whats causing them

--- In Crestron@..., "xymox1357" <public2@> wrote:

I am seeing a lot of these errors in my log. What does this mean ? They seem to occur about once a minute. Very annoying.

Error: CConsoleListenSocket::AcceptConnection: unable to disable Nagle algorithm for Console Sockets.

OK I initialized and reset the Pro 2. I then loaded a blank Pro2 program.

I still get the errors..

I have uploaded a SystemInfo dump of the system with the errors and a blank Pro2 program.



--- In Crestron@..., "xymox1357" <public2@> wrote:

Hmmmm.....

Even more confuzing... I deleted ALL my ethernet devices and the error continued.




--- In Crestron@..., "xymox1357" <public2@> wrote:

Hmmmmmmm....

According to the Series 2 reference guide page 108
,d.dmQ&cad=rja

"Internal system error. Contact Crestron."

Whats weird is I was using a CP2E and it had this error and I switched to a pro2 and it has this error.



--- In Crestron@..., "xymox1357" <public2@> wrote:

Hi Chip,

Thanks for responding.

I removed ALL the ethernet devices and removed the networktime sync and it still does it. Exactly once a minute.

Really annoying.

Maybe its time to ask trueblue cuz i have no way of knowing what this error means or what to diagnose.

Why in the world something on crestron would need to disable the Nagle algorithm and then what would cause it to not be able to is just a mystery.

Im now wondering if something from the outside is causing this error, maybe something on the network is sneding something to its IP address and causing this ?

--- In Crestron@..., "Chip" <cfm@> wrote:

What devices do you have configured in your program on the Ethernet interface?

- Chip


--- In Crestron@..., "xymox1357" <public2@> wrote:

Im seeing these once a minute in the log and im not sure whats causing them

--- In Crestron@..., "xymox1357" <public2@> wrote:

I am seeing a lot of these errors in my log. What does this mean ? They seem to occur about once a minute. Very annoying.

Error: CConsoleListenSocket::AcceptConnection: unable to disable Nagle algorithm for Console Sockets.

Hmmmm.....

Even more confuzing... I deleted ALL my ethernet devices and the error continued.




--- In Crestron@..., "xymox1357" <public2@> wrote:

Hmmmmmmm....

According to the Series 2 reference guide page 108
,d.dmQ&cad=rja

"Internal system error. Contact Crestron."

Whats weird is I was using a CP2E and it had this error and I switched to a pro2 and it has this error.



--- In Crestron@..., "xymox1357" <public2@> wrote:

Hi Chip,

Thanks for responding.

I removed ALL the ethernet devices and removed the networktime sync and it still does it. Exactly once a minute.

Really annoying.

Maybe its time to ask trueblue cuz i have no way of knowing what this error means or what to diagnose.

Why in the world something on crestron would need to disable the Nagle algorithm and then what would cause it to not be able to is just a mystery.

Im now wondering if something from the outside is causing this error, maybe something on the network is sneding something to its IP address and causing this ?

--- In Crestron@..., "Chip" <cfm@> wrote:

What devices do you have configured in your program on the Ethernet interface?

- Chip


--- In Crestron@..., "xymox1357" <public2@> wrote:

Im seeing these once a minute in the log and im not sure whats causing them

--- In Crestron@..., "xymox1357" <public2@> wrote:

I am seeing a lot of these errors in my log. What does this mean ? They seem to occur about once a minute. Very annoying.

Error: CConsoleListenSocket::AcceptConnection: unable to disable Nagle algorithm for Console Sockets.

PRO2


On Mon, Jun 10, 2013 at 12:58 PM, Oliver <oliver@...> wrote:

Jeremy

Was that at 3 series job?

--- In Crestron@..., Jeremy Weatherford <jweather@> wrote:

FYI, we ran across a TV last week (UN46ES7500F) that would only respond

to

"off" commands from a 1-way 232 port, not from a full COM port. Maybe
EX-Link expects TTL levels and gets overdriven by standard 232? No idea,
this is the first time I've seen this, but then we usually have these on
1-way 232 ports anyway...

------------------------------------




Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.
Yahoo!
Groups Links

--
Jeremy Weatherford


[Non-text portions of this message have been removed]

Hmmmmmmm....

According to the Series 2 reference guide page 108
,d.dmQ&cad=rja

"Internal system error. Contact Crestron."

Whats weird is I was using a CP2E and it had this error and I switched to a pro2 and it has this error.



--- In Crestron@..., "xymox1357" <public2@> wrote:

Hi Chip,

Thanks for responding.

I removed ALL the ethernet devices and removed the networktime sync and it still does it. Exactly once a minute.

Really annoying.

Maybe its time to ask trueblue cuz i have no way of knowing what this error means or what to diagnose.

Why in the world something on crestron would need to disable the Nagle algorithm and then what would cause it to not be able to is just a mystery.

Im now wondering if something from the outside is causing this error, maybe something on the network is sneding something to its IP address and causing this ?

--- In Crestron@..., "Chip" <cfm@> wrote:

What devices do you have configured in your program on the Ethernet interface?

- Chip


--- In Crestron@..., "xymox1357" <public2@> wrote:

Im seeing these once a minute in the log and im not sure whats causing them

--- In Crestron@..., "xymox1357" <public2@> wrote:

I am seeing a lot of these errors in my log. What does this mean ? They seem to occur about once a minute. Very annoying.

Error: CConsoleListenSocket::AcceptConnection: unable to disable Nagle algorithm for Console Sockets.

Hi Chip,

Thanks for responding.

I removed ALL the ethernet devices and removed the networktime sync and it still does it. Exactly once a minute.

Really annoying.

Maybe its time to ask trueblue cuz i have no way of knowing what this error means or what to diagnose.

Why in the world something on crestron would need to disable the Nagle algorithm and then what would cause it to not be able to is just a mystery.

Im now wondering if something from the outside is causing this error, maybe something on the network is sneding something to its IP address and causing this ?

--- In Crestron@..., "Chip" <cfm@> wrote:

What devices do you have configured in your program on the Ethernet interface?

- Chip


--- In Crestron@..., "xymox1357" <public2@> wrote:

Im seeing these once a minute in the log and im not sure whats causing them

--- In Crestron@..., "xymox1357" <public2@> wrote:

I am seeing a lot of these errors in my log. What does this mean ? They seem to occur about once a minute. Very annoying.

Error: CConsoleListenSocket::AcceptConnection: unable to disable Nagle algorithm for Console Sockets.

What devices do you have configured in your program on the Ethernet interface?

- Chip


--- In Crestron@..., "xymox1357" <public2@> wrote:

Im seeing these once a minute in the log and im not sure whats causing them

--- In Crestron@..., "xymox1357" <public2@> wrote:

I am seeing a lot of these errors in my log. What does this mean ? They seem to occur about once a minute. Very annoying.

Error: CConsoleListenSocket::AcceptConnection: unable to disable Nagle algorithm for Console Sockets.

4.003.0015 is not the latest firmware for the 2-series.

Most programs don't need to upgrade beyond this version unless you're doing stuff with Smart Graphics I think.
________________________________________
From: Crestron@... [Crestron@...] on behalf of Sebastian [s.marszalek11@...]
Sent: Monday, June 10, 2013 7:36 PM
To: Crestron@...
Subject: [Crestron] Device Firmware

Hey All,

I keep getting this message when I upload a program to a processor.

" The device firmware does not meet the minimum requirements of the File.

Device:4.003.0015(Oct 04 2010)
File:4.006"

This is the latest firmware for the device, anyone know why it's asking that?

Thank you,



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links

Im seeing these once a minute in the log and im not sure whats causing them

--- In Crestron@..., "xymox1357" <public2@> wrote:

I am seeing a lot of these errors in my log. What does this mean ? They seem to occur about once a minute. Very annoying.

Error: CConsoleListenSocket::AcceptConnection: unable to disable Nagle algorithm for Console Sockets.

Where are people purchasing vs 2008 pro from. I'm finding nothing but shady looking resources (old software). I'm not seeing it on Microsoft. I've been told that vs 2012 pro would include down grade rites?

-----Original Message-----
From: "Neil Dorin" <neildorin@...>
Sent: 芒鈧���6/芒鈧���10/芒鈧���2013 6:55 PM
To: "Crestron@..." <Crestron@...>
Subject: Re: [Crestron] c# development


You need to check on creatronlabs.com

Full c# programming is very much in beta still

Sent from my iPhone

On 2013-06-10, at 4:45 PM, Bradley Seman <el_perro_azul@...> wrote:

I did a search for c# in the Crestron group and it returned no results. Maybe i'm doing it wrong, but i'm new here.

We are trying to write a program in c# and part of the functionality needed to for it to be able to connect to a DMPS or MC2E and upload a new program for it and it's connected touch panel.

Our attempts at connecting to a device on the local network have not been successful.

The code we have been using is this (this is just test code, the actual code will use variable names instead of hard coded info):

VptSessionset = newVptSession();

private void btn_Load_Click(object sender, EventArgs e)
{
DialogResult result;
Form LoadForm = new LoadForm(listboxLoadList,
txtControlPanel.Text, txtTPProgram.Text, txtWebInterface.Text,
txtControlFirmware.Text, txtTPFirmware.Text);
result = LoadForm.ShowDialog();
if (result == System.Windows.Forms.DialogResult.OK)
{
//Here is
where we load the list
Console.WriteLine("New VtpSession created!");
set.OpenSession("tcp
10.25.146.126", "C# test");
Console.WriteLine("Session opened!");
int TransID = 0;
String program = ;//fill in your own path/file here
set.AsyncActivateStr(0, program, 10000, TransID, 0, 0);
Console.WriteLine("Session program send!");
}
else if (result ==
System.Windows.Forms.DialogResult.Cancel)
{
// Don't load the list
;
}
}
The program string is blank since you guys will have a different file and directory to use.

after this function is called the set_OnActivateStrComplete function is called:
private void set_OnActivateStrComplete(int nTransactionID, int nAbilityCode, byte bSuccess, string pszOutputs, int nUserPassBack)
{
Console.WriteLine("Inside
of the complete!");
Console.WriteLine(bSuccess);
Console.WriteLine(pszOutputs);
}

when bSuccess is output to the Console, a zero is printed, indicating failure.
does anyone have any suggestions?

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]

I did a search for c# in the Crestron group and it returned no results. Maybe i'm doing it wrong, but i'm new here.

We are trying to write a program in c# and part of the functionality needed to for it to be able to connect to a DMPS or MC2E and upload a new program for it and it's connected touch panel.

Our attempts at connecting to a device on the local network have not been successful.

The code we have been using is this (this is just test code, the actual code will use variable names instead of hard coded info):

VptSessionset = newVptSession();

private void btn_Load_Click(object sender, EventArgs e)
{
DialogResult result;
Form LoadForm = new LoadForm(listboxLoadList,
txtControlPanel.Text, txtTPProgram.Text, txtWebInterface.Text,
txtControlFirmware.Text, txtTPFirmware.Text);
result = LoadForm.ShowDialog();
if (result == System.Windows.Forms.DialogResult.OK)
{
//Here is
where we load the list
Console.WriteLine("New VtpSession created!");
set.OpenSession("tcp
10.25.146.126", "C# test");
Console.WriteLine("Session opened!");
int TransID = 0;
String program = ;//fill in your own path/file here
set.AsyncActivateStr(0, program, 10000, TransID, 0, 0);
Console.WriteLine("Session program send!");
}
else if (result ==
System.Windows.Forms.DialogResult.Cancel)
{
// Don't load the list
;
}
}
The program string is blank since you guys will have a different file and directory to use.

after this function is called the set_OnActivateStrComplete function is called:
private void set_OnActivateStrComplete(int nTransactionID, int nAbilityCode, byte bSuccess, string pszOutputs, int nUserPassBack)
{
Console.WriteLine("Inside
of the complete!");
Console.WriteLine(bSuccess);
Console.WriteLine(pszOutputs);
}

when bSuccess is output to the Console, a zero is printed, indicating failure.
does anyone have any suggestions?

[Non-text portions of this message have been removed]

I am seeing a lot of these errors in my log. What does this mean ? They seem to occur about once a minute. Very annoying.

Error: CConsoleListenSocket::AcceptConnection: unable to disable Nagle algorithm for Console Sockets.

4.003.0015 is not the latest firmware for the 2-series.

Most programs don't need to upgrade beyond this version unless you're doing stuff with Smart Graphics I think.
________________________________________
From: Crestron@... [Crestron@...] on behalf of Sebastian [s.marszalek11@...]
Sent: Monday, June 10, 2013 7:36 PM
To: Crestron@...
Subject: [Crestron] Device Firmware

Hey All,

I keep getting this message when I upload a program to a processor.

" The device firmware does not meet the minimum requirements of the File.

Device:4.003.0015(Oct 04 2010)
File:4.006"

This is the latest firmware for the device, anyone know why it's asking that?

Thank you,



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links