Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
- Crestron
- Messages
Search
|
Re: Graphs
To my knowledge there is not a way to plot graphs on a touch panel with simpl+ like you would in another language. I think that's where you are going with this, correct me if I'm wrong. You will need to build the graphics in VTPro and drive them with your analogs. You might have to do some math to get it to look right but you can definitely make something that looks good. For example at my old company we were working with some energy management software and we were able to parse a data stream from them and show real-time data for energy consumption. We used VTPro bar-graphs and gauges to show all the information after we did a little conversion.
toggle quoted message
Show quoted text
--- In Crestron@..., "solentelectricalservices" <pgrahamsley@...> wrote:
|
|
Re: Graphs
Google Charts API is one option. Otherwise you're into custom Core3
control territory. On Wed, May 8, 2013 at 11:18 AM, solentelectricalservices < pgrahamsley@...> wrote: Has anyone written or would know how to write a module or software -- Jeremy Weatherford |
|
Re: Revisiting IDOCs and lightning
Seth Olle
Makes all the difference. Airplay works amazing with a solid WIFI infrastructure. You can roam throughout the house etc.
toggle quoted message
Show quoted text
From: weddellkw <weddellkw@...<mailto:weddellkw@...>> Reply-To: "Crestron@...<mailto:Crestron@...>" <Crestron@...<mailto:Crestron@...>> Date: Wednesday, May 8, 2013 11:39 AM To: "Crestron@...<mailto:Crestron@...>" <Crestron@...<mailto:Crestron@...>> Subject: [Crestron] Re: Revisiting IDOCs and lightning I'm wondering how many of the AirPlay problems I see (random disconnect, disconnect while roaming, AirPlay 'sink' not appearing in the list) are related to the small-biz class and lower network hardware most of our jobs are using...and if so, can I convince somebody to listen to me and sell/buy a better solution (probably not). Was hopeful for the Unifi/EdgeMax stuff because it's at a comparable price-point to what customers seem to expect/be willing to stomach around here. --- In Crestron@...<mailto:Crestron%40yahoogroups.com>, "fabiodaubermann" <fdaubermann@...> wrote:
|
|
Re: Revisiting IDOCs and lightning
I'm wondering how many of the AirPlay problems I see (random disconnect, disconnect while roaming, AirPlay 'sink' not appearing in the list) are related to the small-biz class and lower network hardware most of our jobs are using...and if so, can I convince somebody to listen to me and sell/buy a better solution (probably not).
toggle quoted message
Show quoted text
Was hopeful for the Unifi/EdgeMax stuff because it's at a comparable price-point to what customers seem to expect/be willing to stomach around here. --- In Crestron@..., "fabiodaubermann" <fdaubermann@...> wrote:
|
|
Graphs
Has anyone written or would know how to write a module or software combination for producing nice graphs on a touch panel/xpanel etc? I have various data points through bacnet/Modbus which took a while to master but have the data in analogue format, I am using edatalogger and was hoping to simply export to excel but it looks crap! I know the new fusion software does this but I don't have a server or the time to even think about playing with that at this stage. Any help would be really appreciated and paid for.
thank you |
|
Re: Quick Q. RMC-SCALER and TX-201-C
And actually something I was completely blissfully unaware of until recently -- the DM-MD6x6 and DM-MDx4 provide PoDM without any external hardware.
toggle quoted message
Show quoted text
But also note that neither a DM-RMC-SCALER-C nor a DM-RMC-200-C can be powered via PoDM -- both require more power than can be supplied over the 8G cable and thus require local power supplies under all circumstances. Lincoln -- Lincoln King-Cliby, CTS Sr. Systems Architect | Crestron Certified Master Programmer (Silver) ControlWorks Consulting, LLC V: 440.449.1100 x1107 | F: 440.449.1106 | I: Crestron Services Provider -----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of Phil Bridges Sent: Wednesday, May 08, 2013 10:47 AM To: Crestron@... Subject: Re: [Crestron] Quick Q. RMC-SCALER and TX-201-C Yes. Only a DM frame will inject power (assuming you have a POE injector) On Wed, May 8, 2013 at 10:37 AM, cyberbri24 <cyberbri24@...> wrote: ** [Non-text portions of this message have been removed] ------------------------------------ Check out the Files area for useful modules, documents, and drivers. A contact list of Crestron dealers and programmers can be found in the Database area. Yahoo! Groups Links |
|
Re: Quick Q. RMC-SCALER and TX-201-C
To clarify, ?A TX -201 can be powered by POE using the injector at the DM or DMPS or locally. ? A scaler can only be powered locally and not POE.
________________________________ From: cyberbri24 <cyberbri24@...> To: Crestron@... Sent: Wednesday, May 8, 2013 10:37 AM Subject: [Crestron] Quick Q. RMC-SCALER and TX-201-C If I power up the SCALER behind the monitor and run the 8G cable direct to the 201-C, do I need to power up from both ends? Havn;t tried yet as was hoping to not have to use the PS on the TX side. Thanks, cyberbri ------------------------------------ Check out the Files area for useful modules, documents, and drivers. A contact list of Crestron dealers and programmers can be found in the Database area. Yahoo! Groups Links [Non-text portions of this message have been removed] |
|
Re: OT: need a new hobby?
Went to an event last week where they delivered product to local Kickstarter backers. The system actually is very impressive - it appears to be solid, and the UI is the best I've seen yet for configuration and interaction with a zigbee/zwave ecosystem.
toggle quoted message
Show quoted text
--- In Crestron@..., "Etienne" <etienne@...> wrote:
|
|
Re: Quick Q. RMC-SCALER and TX-201-C
cyberbri24
Thank you!
toggle quoted message
Show quoted text
--- In Crestron@..., Phil Bridges <gravityhammer@...> wrote:
|
|
Re: Core3 formatted text in VTPro-e (Release Software)
Doh! I hate it when I do things like that.
toggle quoted message
Show quoted text
--- In Crestron@..., "richard_leek" <leek.richard@...> wrote:
|
|
Re: Quick Q. RMC-SCALER and TX-201-C
Yes. Only a DM frame will inject power (assuming you have a POE injector)
toggle quoted message
Show quoted text
On Wed, May 8, 2013 at 10:37 AM, cyberbri24 <cyberbri24@...> wrote:
** |
|
rm-200-c Relay
gsusmood
Had to pull out from a DM-6x6 this box. We replaced a RM-100 so the customer can open a Garage Door. ever since we installed the switched lockup in a matter of minutes and or Hours. we called TB a lot. stretch up all trouble shooting possible. at the moment we swap for another RM-100 the switch wont lock up. so we had an spare cable and run that relay to the AES. At the moment TB don't know what maybe causing this, but when we put the same RM-200-C in my boss DM it works like nothing happens.
|
|
Re: Quick Q. RMC-SCALER and TX-201-C
Yes you need to provide power to both unit.
{Paf} 2013/5/8 cyberbri24 <cyberbri24@...> ** [Non-text portions of this message have been removed] |
|
Re: RoomView Room Sheduling
There's a demo program with simpl and vtpro files in the roomview install directory after the complete setup.
toggle quoted message
Show quoted text
--- In Crestron@..., "Crestron Noob" <crestronoob@...> wrote:
|
|
Re: Wifi Recommendation
Or did moving the WAPs to another room actually help the Ruckus, since it was then able to use beamforming to focus the radio energy in one general direction, towards all the devices, without worrying about 360 degree performance?
toggle quoted message
Show quoted text
The video was interesting, but there is no way it wasn't biased. Ruckus WAPs were the only ones featured for product close-ups, and there was a huge Ruckus logo on the screen at the end. I'm a Ruckus fan, but there was definitely some sort of sponsorship involved in that video. --- In Crestron@..., Nathan Hesson <nhesson@...> wrote:
|
|
Re: RoomView Room Sheduling
Have not gotten around to testing it, but there is a "roomview complete demo" program on crestron website. It appears to contain the modules needed to do scheduling, but iirc it did not include UI
toggle quoted message
Show quoted text
--- In Crestron@..., "toni geagea" <toni.geagea@...> wrote:
|
|
Re: OT - HDBaseT alternatives
Look into Kanexpro. ?They have a new modular switcher series. ?I use their other gadgets and they seem to work really good. ?No problems.
________________________________ From: Etienne <etienne@...> To: Crestron@... Sent: Wednesday, May 8, 2013 2:12 AM Subject: [Crestron] OT - HDBaseT alternatives What are the alternative to Crestron for full HD distribution, when the budget is tight? 4x4, 8x8 or 16x16 tx ------------------------------------ Check out the Files area for useful modules, documents, and drivers. A contact list of Crestron dealers and programmers can be found in the Database area. Yahoo! Groups Links [Non-text portions of this message have been removed] |
|
Re: DMPS 300 output
I see 2 likely issues:
1: Projector does not like 1600x1200. The projector is simply not capable of this. The manual will state the projectors capabilities. 2: Marginal wire. You have a wire that is barely good enough to pass 1080p, but not good enough to pass 1600x1200. Believe it or not, 1600x1200 requires much more bandwidth than 1080p and therefore is much more sensitive to cable quality. |
|
Re: DMPS 300 output
Does the projector state it can scan that high of a resolution? If not,you would need to use a scaling receiver like the scaler-c and set it to the projectors native resolution.
toggle quoted message
Show quoted text
--- In Crestron@..., "mudzone2000" <mudzone2000@...> wrote:
|
Rapha?l
to navigate to use esc to dismiss