¿ªÔÆÌåÓý

--- In Crestron@..., "richard_leek" <leek.richard@...> wrote:

I am working on a Core3 Xpanel where I need some indirect text on several buttons or text labels.

The text is not being displayed on the Xpanel. I can see that the text 'should' be there in Debugger.

Here is copy of what is in the HTML label field:

<cips><FONT size="18" color="#ffffff">S$1?</FONT></cips>

I have also tried this:

<P align="center"><FONT size="12" color="#000000"><cips>S$1?</cips></FONT>?</P>

Neither of these produce any results. I have tried deleting the object and creating a new one and still no good.

Does anyone have experience with this issue? Can you offer any solutions?

Thanks,
Richard

-----Original Message-----
From: "Heath Volmer" <hvolmer@...>
Sent: ?5/?3/?2013 3:30 PM
To: "Crestron@..." <Crestron@...>
Subject: Re: [Crestron] Re: Wifi Recommendation

Can I clarify something when using controllers?

Right now, I'm romaing around this big house between the access points. I keep pressing a button and seeing the fb come into my CF project. At some point, when I drop one WAP and hit another (same SSID, no controller), I lose feedback for a couple of seconds but it seems to be reliably coming back without causing the connection to really break between CF and the processor. If I have a controller-managed WAPs, and good coverage, that couple-second hiccup should be eliminated, correct? The controller sees that one WAP has a better signal strength to the iPad than another and seamlessly hands them off?


Thanks, Heath



On May 3, 2013, at 1:22 PM, "floyd1212" <floyd1212@...> wrote:

+1 for Ruckus

The Pakedge Virtual Cell system appears to be a re-branded Meru system. You may look into pricing a Meru system directly, and compare it to the price of the Pakedge.

Side note: Not that I'm recommending it to anyone, but Ubiquiti is claiming "seamless hand-off" capabilities in the next firmware release for their WAPs, and it doesn't require a controller to manage them. Might be something to keep an eye on, since it will be at a significantly lower price-point than other managed wireless systems.

--- In Crestron@..., Eric Williams <ewilliams0305@...> wrote:

Pakedge wap-w5n with CTL-W5N controller. If price matters you can go down to their macro cell version. Built with IOS in mind and works great. We did a 34k square foot home and 4 covers the whole property without any disconnects



Sent from my pocket robot!

-----Original Message-----
From: "Heath Volmer" <hvolmer@...>
Sent: ?€?5/?€?3/?€?2013 11:37 AM
To: "Crestron@... com" <Crestron@...>
Subject: [Crestron] Wifi Recommendation


Can someone recommend WAPs / controllers for a 4-WAP system, specifically some that will hand off connections between WAPs without hiccuping iPads? I'd like to work with something that I can set up myself (I can only learn so much Cisco ios before I forget it). I've presented Access and the client won't bite on their system.

Currently I have Netgear WNDAP 360 WAPs and while they seem to work very well standing still, they don't hand off worth a crap.

Thanks, Heath


[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links





[Non-text portions of this message have been removed]

--- In Crestron@..., Eric Williams <ewilliams0305@...> wrote:

Pakedge wap-w5n with CTL-W5N controller. If price matters you can go down to their macro cell version. Built with IOS in mind and works great. We did a 34k square foot home and 4 covers the whole property without any disconnects



Sent from my pocket robot!

-----Original Message-----
From: "Heath Volmer" <hvolmer@...>
Sent: ?€?5/?€?3/?€?2013 11:37 AM
To: "Crestron@... com" <Crestron@...>
Subject: [Crestron] Wifi Recommendation


Can someone recommend WAPs / controllers for a 4-WAP system, specifically some that will hand off connections between WAPs without hiccuping iPads? I'd like to work with something that I can set up myself (I can only learn so much Cisco ios before I forget it). I've presented Access and the client won't bite on their system.

Currently I have Netgear WNDAP 360 WAPs and while they seem to work very well standing still, they don't hand off worth a crap.

Thanks, Heath

--- In Crestron@..., Kool-Aid Drinker <herald@...> wrote:

The [enable] input of an SIO is optional. Leave it unconnected unless
you have a compelling reason to enable/disable the SIO.

Just type Trigger into Str1, no need to convert. The Str parameter
that have digit input arrows pointing at them are the one that get
sent.

Put your Bright_Sign_Trigger signal on in1 of the SIO.

If you have multiple commands, use Alt-Plus to expand the SIO.

If your Brightsign is sending anything back, connect the rx$ of the
UDP symbol to the rx$ of the SIO. Type the string you expect to
receive into a Str parameter that has its arrow pointing out. That
digital output will go high when you receive that string.

Hit F1 and read the help file on SIO. Much is explained there.


On Fri, 03 May 2013 17:17:13 -0000, "franzenel"
<erik@...> wrote:

Thanks

In Binary "Trigger" is

0) 0 1 1 1 0 1 0 0
1) 0 1 1 1 0 0 1 0
2) 0 1 1 0 1 0 0 1
3) 0 1 1 0 0 1 1 1
4) 0 1 1 0 0 1 1 1
5) 0 1 1 0 0 1 0 1
6) 0 1 1 1 0 0 1 0

do I need to covert this to Hex

or can I just put "trigger" in.

also does it go in STR2 for the TX to the sign

This is how I have the flow right now

Mobile pro G Press150 (Bright_Sign_Trigger)

Serial I/O [Enable] Bright_Sign_Trigger
Serial I/O [tx$] Bright Sign String
Serial I/O STR1 Blank
Serial I/O STR2 Blank for now but guessing this is what I need to send

UDP/IP
enable Bright_sign_Trigger
TX$ Bright_Sign_String
RX$ //
Port 0622d

Thanks for all the Help once I get the Flow down hopefully I will be able to figure this out.



--- In Crestron@..., Kool-Aid Drinker <herald@> wrote:

The port number is entered as a parameter in the detail view of the
UDP symbol.

For basic interaction between Crestron and a Bright Author project,
use an SIO with its serial output connected to the input of the UDP
symbol (and vice versa).


On Fri, 03 May 2013 13:39:19 -0000, "franzenel"
<erik@> wrote:

I am new to Crestron and would like to know how to send UDP commands. I have some Bright
sign units that I would like to trigger with an Ipad I have setup with Crestron. I have
added a UDP command on C2NENT-2 on port OC. I put the Address as 255.255.255.255 (don't
see were the port is supposed to go though). The command I would like to send in Ascii is
"Trigger". I didn't know if someone had a sample in Simpl that I could look at and reverse
engineer. any help would be great. Thanks

On Fri, May 3, 2013 at 12:13 PM, Heath Volmer <hvolmer@...> wrote:

On May 3, 2013, at 11:30 AM, Eric Walters <sentry07@...> wrote:

Where are these shortcuts listed?

In the same place as the Core 3 documentation...





------------------------------------




Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.
Yahoo!
Groups Links

On May 3, 2013, at 1:33 PM, Heather Baiman <heather@...> wrote:



Many are listed in the help if you search for 'shortcut', you'll see a
topic for keyboard shortcuts

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf
Of Eric Walters
Sent: Friday, May 03, 2013 1:31 PM
To: Crestron
Subject: Re: [Crestron] Re: Ctrl+H rant

Wow. Didn't know about CTRL+SHIFT+B. I always just held down ENTER so that
it would autoname the signals. Where are these shortcuts listed?

On Fri, May 3, 2013 at 10:23 AM, Kool-Aid Drinker <
herald@...> wrote:

Interesting! I knew and used Ctrl-Shift-B for auto-fill (which is
undo-able, and will do ranges), but hadn't encountered Ctrl-Shift-H.
Odd that there are two; odd that they name differently.

Why you include the Shift in you Ctrl-G? Without it, your typo is
harmless.

On Fri, 3 May 2013 15:56:46 +0000, Heather Baiman <heather@...>
wrote:

Every now and then I mistype (always when I'm editing a touchpanel in

Simpl) and Crestron

decides to put a signal name on every join of the touchpanel, which is

completely NOT

undoable. Today I finally figured out what the mistype is, instead of

Ctrl+G so that I can

get to a specific join number, I hit the H and I get completely screwed.


Heather Baiman
Electronic Environments
247 W. 37th
New York, NY 10018
Phone (212)997-1110
Fax (212)997-0474

------------------------------------

Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.

Yahoo!

Groups Links

[Non-text portions of this message have been removed]

------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.
Yahoo!
Groups Links




[Non-text portions of this message have been removed]

--- In Crestron@..., "chuckperkinscrestron" <charles.perkins@...> wrote:

I have now disabled all polling with the exception of PWR?&#92;x0D when the projector is powered off. I am not receiving any ERR responses now.

Is there a buffer or something in the projector that needs to be cleared on a regular basis? If the projector is left off for a long period of time(anywhere from a couple hours to overnight), it seems to lockup and won't except a power "on" command. I have had to unplug the projector, and after it rebooted it would then turn on/off with no problems. This repeatedly happens when the projector is left off.

I have not tested overnight since getting the ERR messages to stop, but I have left it on the test bench for over an hour and it did not lock up.

Thanks for all the info so far.
Chuck


--- In Crestron@..., "Chip" <cfm@> wrote:

So power is the *only* thing you're polling when it is off? And the response to the power poll is an ERR *and* the response you expect?

- Chip


--- In Crestron@..., "chuckperkinscrestron" <chuckperkinscrestron@> wrote:

1. When the projector is "Off", I get a ERR&#92;x0D when polling the projector, I will get the PWR=04&#92;x0D also, that shows that it's off.

On 2013-05-03, at 10:07 AM, Mark Delzer <mdelzer@...> wrote:

Biggest thing to be aware of is how you communicate to the 32x32. I have a
job going now with two 32x32s at head end. In my case i was using the same
code in each room and so I was defining all the analogs of all the i/o.
Because of this I have to buffer the signals with a serial buffer and only
enable them after a delay after the EISC connects. This keeps a reboot in
one of my classrooms from resetting the head end routes and interrupting my
head end VTC and recording units.


Mark


On Fri, May 3, 2013 at 11:27 AM, David Ives <david@...> wrote:

**


Hi folks,

I'm talking with a client who is designing a multi-room system with a
32x32 DM, a few 3 series procs and about 20 TSW panels. He's experienced in
AV (read: been burned before) and is concerned about packing all of the
programs into as few processors as possible.

What kind of limitations should we be concerned about?

The system will not be especially chatty. The rooms are almost all
separate rooms, some with just PC inputs and a single display and others as
VTC rooms.

Thanks!
-dbi

[Non-text portions of this message have been removed]



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links

--- In Crestron@..., Paul Cunningham <paul.cunningham@...> wrote:

We use Ruckus exclusively (as does Access Networks FYI), with great roaming performance. The 7343 is our basic WAP and depending on needs it might get bumped up to a 7962 - I haven't played with the 7982 yet.

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of Heath Volmer
Sent: Friday, May 03, 2013 11:38 AM
To: Crestron@... com
Subject: [Crestron] Wifi Recommendation

Can someone recommend WAPs / controllers for a 4-WAP system, specifically some that will hand off connections between WAPs without hiccuping iPads? I'd like to work with something that I can set up myself (I can only learn so much Cisco ios before I forget it). I've presented Access and the client won't bite on their system.

Currently I have Netgear WNDAP 360 WAPs and while they seem to work very well standing still, they don't hand off worth a crap.

Thanks, Heath

------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links

-----Original Message-----
From: "Heath Volmer" <hvolmer@...>
Sent: ?5/?3/?2013 11:37 AM
To: "Crestron@... com" <Crestron@...>
Subject: [Crestron] Wifi Recommendation


Can someone recommend WAPs / controllers for a 4-WAP system, specifically some that will hand off connections between WAPs without hiccuping iPads? I'd like to work with something that I can set up myself (I can only learn so much Cisco ios before I forget it). I've presented Access and the client won't bite on their system.

Currently I have Netgear WNDAP 360 WAPs and while they seem to work very well standing still, they don't hand off worth a crap.

Thanks, Heath


[Non-text portions of this message have been removed]

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of Eric Walters
Sent: Friday, May 03, 2013 1:31 PM
To: Crestron
Subject: Re: [Crestron] Re: Ctrl+H rant

Wow. Didn't know about CTRL+SHIFT+B. I always just held down ENTER so that
it would autoname the signals. Where are these shortcuts listed?


On Fri, May 3, 2013 at 10:23 AM, Kool-Aid Drinker <
herald@...> wrote:

Interesting! I knew and used Ctrl-Shift-B for auto-fill (which is
undo-able, and will do ranges), but hadn't encountered Ctrl-Shift-H.
Odd that there are two; odd that they name differently.

Why you include the Shift in you Ctrl-G? Without it, your typo is
harmless.

On Fri, 3 May 2013 15:56:46 +0000, Heather Baiman <heather@...>
wrote:

Every now and then I mistype (always when I'm editing a touchpanel in

Simpl) and Crestron

decides to put a signal name on every join of the touchpanel, which is

completely NOT

undoable. Today I finally figured out what the mistype is, instead of

Ctrl+G so that I can

get to a specific join number, I hit the H and I get completely screwed.


Heather Baiman
Electronic Environments
247 W. 37th
New York, NY 10018
Phone (212)997-1110
Fax (212)997-0474

------------------------------------




Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.
Yahoo!
Groups Links

[Non-text portions of this message have been removed]



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of Kool-Aid Drinker
Sent: Friday, May 03, 2013 1:24 PM
To: crestron@...
Subject: [Crestron] Re: Ctrl+H rant

Interesting! I knew and used Ctrl-Shift-B for auto-fill (which is
undo-able, and will do ranges), but hadn't encountered Ctrl-Shift-H.
Odd that there are two; odd that they name differently.

Why you include the Shift in you Ctrl-G? Without it, your typo is
harmless.

On Fri, 3 May 2013 15:56:46 +0000, Heather Baiman <heather@...>
wrote:

Every now and then I mistype (always when I'm editing a touchpanel in Simpl) and Crestron
decides to put a signal name on every join of the touchpanel, which is completely NOT
undoable. Today I finally figured out what the mistype is, instead of Ctrl+G so that I can
get to a specific join number, I hit the H and I get completely screwed.


Heather Baiman
Electronic Environments
247 W. 37th
New York, NY 10018
Phone (212)997-1110
Fax (212)997-0474

------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links