Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
- Crestron
- Messages
Search
|
Re: Panel Join Numbers
Hyper terminal or putty work fine
toggle quoted message
Show quoted text
Sent from my iBerry On Sep 18, 2012, at 11:53 AM, sebastian marszalek <s.marszalek11@...>
wrote: Thanks Tray, What application do you recommend to use with a PC? -- Sebastian Marszalek [Non-text portions of this message have been removed] |
|
Re: Tandberg C40 Module Help
This has proven to be a very frustrating experience trying to get control of this codec. I've turned off the password requirement and still no control. Kinda beaten my head up on the wall with this one. I see communication flowing back and forth but the unit will just not respond to any commands, like it is ignoring them. I know I'm missing something very fundamental as I am working with 2 units and both work the same.
toggle quoted message
Show quoted text
--- In Crestron@..., Lincoln King-Cliby <lincoln@...> wrote:
|
|
Re: Christie Solaria Series 4K CP4220 control
Chip
Not familiar with that particular unit - what format/syntax do the power commands use?
toggle quoted message
Show quoted text
- Chip --- In Crestron@..., "shannon.stimpson" <shannon@...> wrote:
|
|
Christie Solaria Series 4K CP4220 control
I have a beautiful Christie here, not having any luck swithcing inputs.
I am talking to it, power on and off, but formatting the string to select the 'channel' and input are escaping me. There are four 'channels' programmed to the projector, I am attempting to access channel 12, utilizing the DVI-A input. Called Christie, not much help. Anyone play with one of these yet? |
|
Re: Panasonic DMP-BDT500 Bluray
Chip
I just went through this dance with Panasonic tech support a couple days ago - for this very particular model, no less.
toggle quoted message
Show quoted text
Their (expected?) tier 1 support response: "No - we are not aware of any protocol available for Ethernet control of this device". That was the second response. The first was "No - we're not aware of any software that will control this device over Ethernet", despite the fact that was *not* the question I asked. :( So, good luck with that. If you take it on, I hope you can get further than I did. - Chip --- In Crestron@..., "solentelectricalservices" <pgrahamsley@...> wrote:
|
|
Re: Panel Join Numbers
You could receive and capture the serial data into your PC or into another control system like a QM-RMC.
I¡¯d prefer going into another control system but it doesn¡¯t make that much difference. Tray From: sebastian marszalek Sent: Tuesday, September 18, 2012 11:41 AM To: Crestron@... Subject: [Crestron] Re: Panel Join Numbers Works great! I have another job that I don't even have the source code. Is it possible to see what is being transmitted on a given Com port? -- Sebastian Marszalek [Non-text portions of this message have been removed] |
|
Re: Refigerators, anyone?
Yeah, beer and Dr Pepper count... mmmmm!
toggle quoted message
Show quoted text
I'd like it to scan items going in or out and keep an inventory. Tray == -----Original Message-----
From: Heath Volmer Sent: Tuesday, September 18, 2012 11:05 AM To: Crestron@... Subject: Re: [Crestron] Refigerators, anyone? I want analog outputs for beer count and Coca Cola count. On Tue, Sep 18, 2012 at 8:55 AM, Chip <cfm@...> wrote: ** ------------------------------------ Check out the Files area for useful modules, documents, and drivers. A contact list of Crestron dealers and programmers can be found in the Database area. Yahoo! Groups Links |
|
Re: Refigerators, anyone?
I want a picture of the person that opens the refrigerator door. So I
toggle quoted message
Show quoted text
can see who in my house keeps hiding the peanut butter in the fridge. Everyone knows peanut butter goes in a cabinet. Real world a contact closure for the door would be nice to send to touch panels if the fridge was left open and then an email if it's open for more then 10 minutes. And If the fridge monitored internal temperatures alarming on temp spike would be nice too, especially for our clients who have beach houses, if the compressor dies and you Leave the door closed to the fridge, when you get back in 4 months your greeted with the most horrific smell ever to start your summer vacation. It smells so bad you can taste it. Sent from my iBerry On Sep 18, 2012, at 11:05 AM, Heath Volmer <hvolmer@...> wrote:
I want analog outputs for beer count and Coca Cola count. |
|
Re: Freelance
Wellcome!
toggle quoted message
Show quoted text
And by the way, I stay on my own two feet here in Central Europe. Ready to work. --- In Crestron@..., Bart Podkowka <bart@...> wrote:
|
|
Re: Refigerators, anyone?
Heath Volmer
I want analog outputs for beer count and Coca Cola count.
toggle quoted message
Show quoted text
On Tue, Sep 18, 2012 at 8:55 AM, Chip <cfm@...> wrote:
** |
|
Parsing Ethernet Data from Onkyo receiver
Ive been working on a module for my onkyo tx-nr708 to give me all the ipod info on touchpannels as well as support touching each line to select an option. that all works pretty well as the data comes in pretty small chunks. when i use the same method to parse the network data comming in to use pandora or other streaming services the album art causes everything to go crazy. im not real familiar with any programming language but ive managed to get it to work 100% through serial and am looking for help making work through ethernet. pandora feeds the album artwork out over ethernet not serial and its to much data to fast for my programming to handle. does anyone know how to handle this type of data? if possible id like to even use it to display the same album artwork. this is all being done in simpl+. im just looking for some direction of how to handle and or store this data. thanks in advance.
|
|
Re: new template from Customcode crafter
It is nice. Some things I don¡¯t like.
1 The page layout is a bit too busy. Not the template¡¯s fault of course. 2 On some of the subpages, the header text is hard to read against the speckled background. For the sample image, I¡¯m referring specifically to the Ceiling fan and Shades subpages. 3 Inactive source buttons on the scrolling list are hard to read. Contrast is too low. I¡¯d remove the opacity for inactive source buttons. 4 OK, this is a nitpicky thing but I¡¯ll mention it anyway. The light source for the graphics is inconsistent. Sometimes its center lit as if the light source is behind the viewer and sometimes its lit from overhead. 5 Personal preference, I don¡¯t like the swooping overlay on top of the sources scrolling list. It makes the icons even harder to see. That¡¯s just my preference, sometimes less is more. Things I like 1 the post it note is a cool idea. Even better if it can fetch those from an external source. 2 Weather subpage is easy to read. 3 Contrast for the controls is generally good and easily read even with non-bold text. 4 Tabbed interface combined with scrolling list. I like... Tray From: gsusmood Sent: Tuesday, September 18, 2012 9:32 AM To: Crestron@... Subject: [Crestron] new template from Customcode crafter HEy guys I just notice they aded this new template: . I know most of your create custom GUIS (including my self) but looks really smooth, flashy and quite fresh. I know that from job to job this is totally different but any impression to bring? would be nice to heard from all of you! [Non-text portions of this message have been removed] |
|
new template from Customcode crafter
gsusmood
HEy guys I just notice they aded this new template: . I know most of your create custom GUIS (including my self) but looks really smooth, flashy and quite fresh. I know that from job to job this is totally different but any impression to bring? would be nice to heard from all of you!
|
|
Re: IT Cueserver Socket Connection error
I fixed it by moving to serial. They actually sent us a new unit and we were having the same issue. Further investigation determined that the unit was actually falling off the network, not just losing connection with the Crestron proc. Turns out the RJ45 jacks on the units we had were slightly too big for most cables and they were not seating correctly. Moving to a sheilded cable with a thicker padding helped, but in the end we were not comfortable with this fix so we moved to RS232. You'll have to source that crazy 40 pin <> DB9 adapter if it didn't come with one.
toggle quoted message
Show quoted text
I'd ditch the official module. According to the IT guys, it was half baked by Crestron and they failed to finish. It's one-way anyway, so there is no real benefit. Just use and SIO instead (or a few if you want to break out your commands by area). Keep in mind that the commands for RS232 need to be formatted differently. You need [] brackets around them. No delimiter is needed. The protocol is clearly defined and easy to work with. One hint for smooth dimming is to utilize the @P1 command to stop a ramp. For example: Dim Up: [t5u4@90] (Ramp group 4 to 90% over 5 seconds) Run your press through a NTG symbol and have the output land on the SIO with this command: [t0u4@P1] Essentially telling the unit to immediately(t0) set group 4 (u4) to the current level of Playback fader 1 (P1). In other words "set yourself to the level you are at right now". Similarly, Dim Down would be: [t5u4@0] Besides hardware issues, I found the Cueserver environment an easy one to work in and the installation has run successfully for 2 years now. HTH, Matt --- In Crestron@..., "scurrington1" <scurrington1@...> wrote:
|
|
Re: Tandberg C40 Module Help
It can be disabled via TMS or the on-screen menus but by default yes.
toggle quoted message
Show quoted text
-- Lincoln King-Cliby, CTS Sr. Systems Architect | Crestron Certified Master Programmer (Silver) ControlWorks Consulting, LLC V: 440.449.1100 x1107 | F: 440.449.1106 | I: Crestron Authorized Independent Programmer -----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of techybabble Sent: Tuesday, September 18, 2012 9:23 AM To: Crestron@... Subject: [Crestron] Re: Tandberg C40 Module Help Does username and password have to be used when going rs232? --- In Crestron@..., "jcdigitalmethod" <j.j.cunningham@...> wrote:
------------------------------------ Check out the Files area for useful modules, documents, and drivers. A contact list of Crestron dealers and programmers can be found in the Database area. Yahoo! Groups Links |
to navigate to use esc to dismiss