开云体育

Anyone have a module for serial control of this projector or
documentation/protocol. Benq is very hard to reach so any help would be
appreciated.

Awesome - glad to hear it!

- Chip


--- In Crestron@..., "Jon" <fueler1@> wrote:

Chip your a hero, it works great with the play sample. I will add more and test and then post it to the files section.

Thanks again!!

--- In Crestron@..., "Chip" <cfm@> wrote:

--- In Crestron@..., "Jon" <fueler1@> wrote:

Chip I am a total rookie when it comes to S+. I opened the module
you attached in S+ and I see a spot near the top where it says
ipaddr and then there is a 30 in brackets, do I replace the 30 with
my ip (192.168.1.102)?

When you finally get the module to appear in your SIMPL program, there will be a parameter field on the module - type the IP address there, and it will be incorporated into the module when you compile.

Also if that play command works, do I simply add more line below the PUSH dune_play (like this)---
PUSH dune_pause
PUSH dune_stop
etc?

Exactly. You want to copy the code (enclosed in curly braces) that's just below the PUSH statement as well - just where you saw "CurrCmd = 1", increment that with each new PUSH statement - so pause sets it to 2, for instance - stop sets it to 3, etc. All you're doing is storing a value to be used later - think of it like an analog value from the SIMPL environment. Later on - after the connection is established with the player, the code in function "SendCmd" gets called, which references the CurrCmd value, using it to send the correct string to the player.

And then at the bottom I add the command after the first one or is
there some way I need to tell it what each command is differently.

You get to do the same thing here that you did for the PUSH statements. Copy the line that says

Cmd$[1] = "GET /cgi-bin/do?cmd=ir_code&ir_code=B748BF00 HTTP/1.0&#92;n&#92;n";

and paste it on the next line below. On that line, change "Cmd$[1]" to "Cmd$[2]", and alter the "code=xxxxxxxx" with the code for (following the example) pause, then do it over again with Cmd$[3], and put in the code for stop, etc...

I am so rookie on S+, Im good with simpl windows, just havent tried
S+ at all (besides the one time in intermediate class).

No time like the present!!

So I told S+ to save and compile and then it put a bunch of files
in the folder I got from you, how do I get that so show up in user
db in simpl so I can add it to my project? I copied the files from
the SPLworks to the SPLworks in my project folder, and I copied the
dune***.usp and dune***.ush to my project folder and reload teh
libraries but they dont show as a module to add to my program, what
am I doing wrong?

The SPLworks folder is a temporary thing - you can just throw it out. As long as you have the .usp and .ush - you're good.

I'm going to be that next time you launch SIMPL Windows and open your program, you'll see "dune ip control test s+" as a module in the project modules folder. Sometimes it takes quitting out of SIMPL Windows and re-launching to get stuff to show up.

- Chip

I want to create a module in Simpl, which contains an analog initialize feeding into an analog equate.

I want the module to have a parameter field, so that I can for example in parameter field 1, enter 1d, this then needs to feed both the initialize and equate that value.

A neat thing to have, but not necessary, would be to have its value set to a default of 1d for field 1, 2d for field 2 etc.

Is this possible to do in Simpl or do I need to enter the world of S+ for this?

Any help appreciated.

Ok, so has anyone tried the new SB release since yesterday...

I just added the new Crestron Weather device to my AMP-AIP system at home to test the intended functionality and translate it to a SIMPL system I'm currently programming.

When I read the release notes, I was skeptical at best....

My average build time for my home system was about 12 minutes.

I just added another MLX-2 to the program as well as the weather module and a few other small changes.

Interface build time - about the same
Program generation - 2:33!!!!!!!!!!!!!!!!
Compile time - about the same

On the Finish tab, there are not options to simply "update system" which according to the release notes can update portions of the program without rebuilding in it's entirety.

This is revolutionary.... all my complaining was worth it LOL!

Cheers,

-Neil

I just had the same problem. You need to update your SIMPL as well. I
updated both the Crestron DB and the Device DB but did not update SIMPL and
got the exact same error. Updated SIMPL to 3.01.22.00 and problem solved.

HTH

Robert

On Sun, Feb 20, 2011 at 8:15 AM, slip.cougan <slip.cougan@...>wrote:

I've just been handed an archive from one of my colleagues to make some
additions. First thing I did was import the archive into simpl & compiled
before making any changes (a habit I have to make sure there are not going
to be issues before I make any changes)

My colleagues version compiles fine.
I'm getting the errors listed below in the compile log:
We are both running similar sw setups:
SIMPL Windows: 2.12.44
SIMPL+: 3.03.13
symlib.tio: 690
iodev.tio: 690
Include3.dat 1.69
Device Database: 31.05.005.00
I'm running Crestron Database 24.00.039.00 whereas my colleague is running
23.05.010.01 (Can't see that that should make much difference)

Compile log:
ERROR (CMCVT149) File: C:&#92;Documents and Settings&#92;...&#92;Simpl&#92;NewOld.csp, Line
39
Undefined variable: '#IF_SERIES2'
ERROR (CMCVT149) File: C:&#92;Documents and Settings&#92;...&#92;Simpl&#92;NewOld.csp, Line
41
Undefined variable: '#ELSE'
ERROR (CMCVT149) File: C:&#92;Documents and Settings&#92;...&#92;Simpl&#92;NewOld.csp, Line
42
Undefined variable: 'GETPROGRAMNUMBER'
ERROR (CMCVT149) File: C:&#92;Documents and Settings&#92;...&#92;Simpl&#92;NewOld.csp, Line
43
Unmatched symbol: '#ENDIF'
ERROR (CMCVT149) File: C:&#92;Documents and Settings&#92;...&#92;Simpl&#92;NewOld.csp, Line
46
Statement outside of function scope
ERROR (CMCVT149) File: C:&#92;Documents and Settings&#92;...&#92;Simpl&#92;NewOld.csp, Line
47
Missing ';'
ERROR (CMCVT149) File: C:&#92;Documents and Settings&#92;...&#92;Simpl&#92;NewOld.csp, Line
48
Local variables must be declared at top of function
ERROR (RLCMCVT171)
Could not copy SIMPL+ output file to C:&#92;Documents and
Settings&#92;...&#92;Simpl&#92;_S2_199_AV2__MAIN_PROCESSOR_20__feb_new.spl.
WARNING(RLCMCVT220)

NewOld.csh gets created in the &#92;SPlsWork but I cannot find NewOld.csp so
assume it gets deleted after the compile.

Any ideas what may be causing these errors?
Many thanks
gary

[Non-text portions of this message have been removed]

So did we, before we switched to Rena A&E. Cartell's box is larger, and
you'd need to custom wire 2 of them (and call them to get the wiring
diagram) in order to do directional logic. We've been much happier, and
haven't had any failures whatsoever. We buy the AX2-4-2C. (10-35v AC/DC,
2 connector, fail safe). It just works.



Directional Logic (Model AX2DL):
The Model AX2DL's directional logic feature uses the Channel 1 and
Channel 2 loops to determine the
direction a vehicle is traveling. The loops must spaced such that the
vehicle can span both loops. The expected
installation is two loops, one after the other in the same lane, spaced
anywhere from overlapping to 6 feet apart.

When a vehicle travels from the CH 1 Loop
and enters the CH 2 Loop, the CH 2 Relay and
LED activate to indicate the AB direction.

When a vehicle travels from the CH 2 Loop
and enters the CH 1 Loop, the CH 1 Relay and
LED activate to indicate the BA direction.

Chris

On 2/20/2011 8:04 AM, tombaldwin1122 wrote:

Try these guys - -

I have used them before without any issues. There is extra set of
relays, either NO or NC where you can program an event after vehicle
detection.

Tom

--- In Crestron@... <mailto:Crestron%40yahoogroups.com>,
Heath Volmer <hvolmer@> wrote:

Can anyone give me suggestions on driveway sensors - detecting cars

pulling up to a gate or house.

Brand names, caveats?

Thanks, Heath

[Non-text portions of this message have been removed]

Any suggestion.

I want to trig 347 light with 120. Volt clw-sw

Thanks for help

Rapha毛l Thiffault
Programmeur Int茅grations

Duocom Canada
10000, Boul. Cavendish
St-Laurent, Qc H4M 2V1

Message envoy茅 avec mon Blackberry

Any suggestion.

I want to trig 347 light with 120. Volt clw-sw

Thanks for help




Rapha毛l Thiffault
Programmeur Int茅grations

Duocom Canada
10000, Boul. Cavendish
St-Laurent, Qc H4M 2V1

Message envoy茅 avec mon Blackberry

Anyone have a module for serial control of this projector or
documentation/protocol. Benq is very hard to reach so any help would be
appreciated.

Try these guys - -

I have used them before without any issues. There is extra set of
relays, either NO or NC where you can program an event after vehicle
detection.

Tom

--- In Crestron@... <mailto:Crestron%40yahoogroups.com>,
Heath Volmer <hvolmer@...> wrote:

Can anyone give me suggestions on driveway sensors - detecting cars

pulling up to a gate or house.

Brand names, caveats?

Thanks, Heath

Can anyone give me suggestions on driveway sensors - detecting cars pulling up to a gate or house.

Brand names, caveats?

Thanks, Heath