I too have had multiple requests for multi dimensional lighting control and also a new intergalactic heating zone layout and control RFP just came out from the Vulcan planetary housing authority.
Please feel free to contact me if you have?any questions or if I can help you in any?way
Have a great day.
Gregory Davis
631-806-5661
toggle quoted message
Show quoted text
"Until they revamp the tests to be indicative of real world scenarios"? ?
What do you mean?? Since one of my programmers attempted the Masters entry level certification test last year, we've had at least a dozen clients come up and ask us to program a dynamic floor plan seating layout on an airplane that has the ability to play blackjack between the different zones.? You're telling me you haven't?
|
"Until they revamp the tests to be indicative of real world scenarios"? ?
What do you mean?? Since one of my programmers attempted the Masters entry level certification test last year, we've had at least a dozen clients come up and ask us to program a dynamic floor plan seating layout on an airplane that has the ability to play blackjack between the different zones.? You're telling me you haven't?
|
Until they revamp the tests to be indicative of real world scenarios, I will remain at my current level. Which is Cubic Zirconia?
toggle quoted message
Show quoted text
On Oct 20, 2022, at 5:49 AM, johnh via groups.io <johnh@...> wrote:
?I was gonna post the exact same thing. As they were highly debated last year with relation to the time involved to complete them, I didnt even try to open it yet. Last year's Silver I opened it up and I just couldnt dedicate the time needed for it- it was overly complicated compared to tests just a couple years ago.??
|
Re: LG 43UR640S IP Control
On Thu, Oct 20, 2022 at 07:29 AM, Gary Rowland wrote:
Can anyone confirm the port number I should be using please?
WOL port is arbitrary in most cases, but UDP :9 is most common for the broadcast. (That's also what I used in the "UDP WOL" SIMPL example program's UDP/IP Communications definition in my previous post.)
|
I was gonna post the exact same thing. As they were highly debated last year with relation to the time involved to complete them, I didnt even try to open it yet. Last year's Silver I opened it up and I just couldnt dedicate the time needed for it- it was overly complicated compared to tests just a couple years ago.??
|
The example shown in the API docs is a POST request with multipart form data, so I would start with that:?
I don't see an example of actually uploading a file though, just pointing to an existing one.
[Edited Message Follows]
G'day all,
Has anyone successfully added or modified a program file on a VC4?
I've tried but have been unable to make it work.
I can query the existing programs using the following;
curl -k -X GET "" -H "accept: application/json" -H "Authorization: [#####]" I can't work out how to send the program file. When I try to send the following;
curl -k -X PUT "" -d {"ProgramId":23,"AppFile":"D:\CrestronCode\Code\bin\Debug\test.cpz"} -H "accept: application/json" -H "Authorization: [#####]" I receive the following message.
{
"Actions": [
{
"Operation": "set partial",
"Results": [
{
"path": "Device.Programs.ProgramLibrary",
"object": "NULL",
"StatusInfo": "ProgramId: Missing required parameter in the JSON body or the post body or the query string",
"StatusId": 6
}
],
"TargetObject": "ProgramLibrary",
"Version": "2.0.1"
}
]
}
?
Thanks in advance.
|
Re: LG 43UR640S IP Control
Thank you for all your comments and advice. On this particular installation most displays will use Crestron Connected, however, some are utilising a Kramer keypad so I was trying to get my head around the whole WOL thing, and using a platform I am more familiar with seemed the best idea. @? Dave H - Crestron TS?Thank you for your link, I will follow it up. Can anyone confirm the port number I should be using please? Thanks. Gary.
|
Re: AUTH and SSL on 3 Series
One of the issues I have seen is only partial downgrades on the processors with control subnet. Pay attention to the puf results chart. In some cases, I have had success downgrading all components by puf-ing twice (same puf file).?
|
Where exactly do you see it?
|
Re: AUTH and SSL on 3 Series
Nope, not true, the INIT/RESTORE process forces it in newer firmware¡even if it had been off since day one. And the behavior was confirmed by Crestron: ¡±? But I am seeing the same as you're reporting.
After updating FW from v1.503 to v1.8001, FORCED_AUTH_MODE is enabled and AUTH+SSL auto-reenabled w/ the creds that were applied prior to v1.503 AUTH+SSL OFF.¡±
|
Has anyone else looked at the new exam?
I am curious if it's the same style/difficulty as the previous 3.
I have the new one sitting in the dashboard and I want to plan my time accordingly.
Last exam I took 3 years ago took me over a couple hundred hours.
Hoping the time commitment toned down a bit!
|
Re: AUTH and SSL on 3 Series
I think technically if you don't add AUTH to the processors, you'll be fine. But...
|
Re: CP4 with TPS-4L on Windows 11
I'm sure that you can still config/compile in VTP.? I never use the transfer box directly in VTP or SMW (Just prefer using TBx...sort of...)
Are the 4L's communicating with Cresnet or Network? if Cresnet, I wonder if it might just be that the 4-series doesn't like loading Cresnet TPs directly??
If you can go IP, I'm sure that would still work...
|
Re: OT: Presentation projector
Yeah, they want 4K for 'future-proofing'...
And I'd go with DP or other, but 1-chip DLP is out for Color-wheel issues and cost....
|
Re: LG 43UR640S IP Control
On Wed, Oct 19, 2022 at 11:34 AM, Audvizer wrote:
Also, does the Display have Crestron Connected? I vaguely remember using that for a similar model.
Yes, this model (LG 43UR640S) does also appear to support Crestron Connected for IP Control. ? ?
|
Re: LG 43UR640S IP Control
Idk about that particular model's OSD Menu setup options, etc. but my WOL guidance and examples can be found in this comment. /g/crestron/message/245762?
|
Re: LG 43UR640S IP Control
Hi Gary,
Have you set PM to Network Ready?
Also, does the Display have Crestron Connected? I vaguely remember using that for a similar model.
|
Has anyone managed to get an?LG 43UR640S to wake on LAN? I have tried everything suggested in? /g/crestron/message/246127?to no avail.? The menu structure is different from other LG displays I have worked with but to access the advanced menu you hold the settings button and type 1105 then OK. One in there, I have set "WOL(Magic Packet)" to "Power On" and have turned "LG Connect" to "On". I have tried UDP ports 9 and 12287 with no joy, a port scan shows a UDP port on 161 which I have also tried. All power saving options have also been turned off. Any help would be greatly appreciated. Thanks in advance, Gary.
|
Re: AUTH and SSL on 3 Series
John, agreed with your situation as that was how our CP3N was as well. ?It had been nursed along from update to update never having AUTH nor SSL turned on. ?Once an INIT/RESTORE was performed on the replacement unit there was no going back. ?1.8x FW without AUTH/SSL then INIT/RESTORE then forced AUTH. No rolling back or combination of nonsense ¡®fixed¡¯ it. ?Dave H was able to repeat and confirm this on the bench. ?I sent him the support ticket number and RMA in response to his input to this thread but never heard back.
|
Re: CP4 with TPS-4L on Windows 11
Never heard anything like that. I just did some updates on 4Ls for a site a couple months ago with no issues.?
|
James M Pedersen
Dave H - Crestron True Blue Tech Support Engineer Since 2014
AVMaster