Keyboard Shortcuts
Likes
- Crestron
- Messages
Search
|
Re: Digital Projection e-vision 4500
"Just did an eVision 4500 the other day, the projector is PJLink compatible, save yourself the hassle and use that instead"
That's a little bizarre.? I'm working with an E-Vision 7500 right now, and the protocol is completely different than the snipped the OP shared. We've been connecting IP through HDBaseT connections off DM/DMPS units with zero issues... ? - Chip |
|
Re: TSW750 - play sound?
"No. Like I said on my TSW-750 if I pulse the join, the entire file plays. If I hold it high, it repeats as long as join is high."
I think he's asking feedback-wise?? That the join coming in from the touch panel symbol would/should act like someone is pressing and holding a button with that join value while the file is being played back? I.E., you send a momentary pulse to that join, the file starts playing - while it's playing, the FB join goes high, then returns low when the .mp3 stops... Just how I read it. No insight on the Studio issue...? :) ? - Chip |
|
Re: Digital Projection e-vision 4500
Just did an eVision 4500 the other day, the projector is PJLink compatible, save yourself the hassle and use that instead.
Side note, although the web utility shows that the projector is Room View / ?Crestron Connected compatible, the projector *DOES NOT* support it. Reason being that the projector is a re-branded unit, I believe the baseline chassis is a Vivitek, hence the completely different command protocol. Hope that helps. Rich |
|
DM-MD8x8 Error message
Hi,
Can anybody help me with DM error with the following message? HDCP ERRORS OUTPUT 1 - DM OUTPUT UNAUTHENTICATED OUTPUT 2 - SAME OUTPUT 3 - HDMI OUTPUT UNAUTHENTICATED I cant find these messages in the DM tool. Has anyone ran into this problem? It also keeps loosing the signals on the displays when watching cable. Thank you |
|
Re: Wake on LAN module
You need a UDP client with an IP of 255.255.255.255 using port 9. Send a string that consists of \xFF\xFF\xFF\xFF\xFF\xFF followed by the MAC address in hex like \x00\x0C\x31\x24\x08\x4F repeated 16 times. On Fri, Feb 5, 2016 at 6:58 AM, Jon Spackman fueler1@... [Crestron] <Crestron@...> wrote: I couldn't get it to work either. I found a different magic packet logic in a tv module in the file section and that also didn't work. |
|
Re: TSW750 - play sound?
I believe the sound plays/repeats for as long as the join is high, so make sure you aren't just pulsing it. On Thu, Feb 4, 2016 at 5:46 PM, kgossen@... [Crestron] <Crestron@...> wrote:
|
|
Re: TSW750 - play sound?
It doesnt work for me, Im using crestron studio with a tpmc-4smd and a cp3. I loaded the mp3 file with sound manager and got a play sound digital join and a stop sound digital sound number then added a button. I joined press signial of the device that corresponds to the button to the fb signial that corresponds to the join of the play sound and got nothing. Any ideas of what might be wrong?
|
|
Re: Problem in mycrestron ddn
It sounds like you don't have all the ports open at the location you are trying to gain remote access from. You need to open http port 80, CIP port 41794, and port 41795, pointed at the Crestron processor,?? on the router from where you are trying to gain access from.??? To test if the ports are open, you can use the website? I'm new to setting up remote access and I just recently got it working. ?I had the same error you did and the fix was opening up?(and verifying) those?ports on my router. On Friday, February 5, 2016 5:07 AM, "elwatchout@... [Crestron]" wrote:
?
Hi, Problem in mycrestron ddns :? Module (Crestron Name resolution Interface) in control system work well ; ip register ok , modules status connected and no error , but when i test the domain in??: Results - Client Connection: Failure (ConnectionRefused) |
|
Re: Combinable / Divisible Rooms
I only prefer crosspoints when *I* do the original code.? If I'm handed code, I'd greatly prefer the original programmer to have use buffers. On Fri, Feb 5, 2016 at 8:31 AM, Caleb Radecky caleb@... [Crestron] <Crestron@...> wrote:
|
|
Re: Combinable / Divisible Rooms
¿ªÔÆÌåÓýSome people like crosspoints, others like buffers. I¡¯ve heard arguments for both, and both have valid points as to why they use the connection logic of choice. ? Caleb Radecky |
Manager, Online Products & Services ? From: Crestron@... [mailto:Crestron@...]
Sent: Friday, February 05, 2016 8:20 AM To: Crestron@... Subject: [Crestron] Re: Combinable / Divisible Rooms ? ? How do you NOT use Crosspoints?! Crosspoints is what keeps me sane.
|