¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Messages
Expanded Topics Messages Polls
Date
Re: Water Main Valve Control

 

¿ªÔÆÌåÓý

I've used Watercop motorized valves on my homes for over 20 years.? They make valves for residential and commercial buildings with pipes up to 4" in diameter.

That last one I bought was 15 years ago and it still works just fine.? The one I have doesn't have any fancy AI leak detection features.? It is operated using 2 relays (1 for open, 1 for close).? These are wired to relays on my ELK alarm system and if any of the water sensors in my home detect a leak the ELK directly shuts off the supply of water to the house.? Through integration of the ELK alarm system and my Crestron system I can also leverage other logic to control the Watercop.? For example, once per month the Crestron system exercises the Watercop valve so it doesn't get frozen by mineral buildup over time.

I expect they now have valves with smart leak detection built in but my 15 year old one is still working just fine.

Hope this helps

Jay

On 4/29/2025 7:22 AM, ckangis via groups.io wrote:

Hi All,
Has anyone found an integratable Water Main Flow valve that you've had good experience with?
FloLogic has started to be big in the luxury home market but there's no integration (And it's pricey!)
I remember being super excited when I saw the product from Hero Labs at Cedia ~10 years ago, designed by some former Crestron Integrators, but it seems that they got bought and only currently available in the UK, not the USA...
?
Would love to hear peoples' ideas on this...
Re: YAMAHA RM-CR

 

Hey @Crestron_Programmer_84,
?
Did you ever get around to finishing the module? If so, are you willing to share?
?
Thanks
Water Main Valve Control

 

Hi All,
Has anyone found an integratable Water Main Flow valve that you've had good experience with?
FloLogic has started to be big in the luxury home market but there's no integration (And it's pricey!)
I remember being super excited when I saw the product from Hero Labs at Cedia ~10 years ago, designed by some former Crestron Integrators, but it seems that they got bought and only currently available in the UK, not the USA...
?
Would love to hear peoples' ideas on this...
Re: D3Pro maintenance mode

 

I am surprised it lasted this long.
?
I am not actually a D3 hater (although I have cursed it out many times over the years)!
?
I did a lot of work in it for 20 years and despite the quirks and bloated code, I still have systems from 2004 running on PAC2/D3.
?
RIP D3
D3Pro maintenance mode

 
Edited

Today I open the page of the D3pro software, and I see this tag:
?
Effective March 31, 2025, Crestron D3 Pro software will be transitioned into maintenance mode. For more information, refer to?.
?
?
Seems D3pro will be obsolete soon. I didn't thought this will happen, at least for a few years more. In fact the article was lounched since Jan 29 2025.

Re: Home compatible security system recommendations?

 

On Wed, Apr 2, 2025 at 12:25 PM, David Chramcow wrote:
Yes, that's what I've been using. TL280 with IP comms.
Hey David, we install DSC systems also.? I'm wondering if you have any more information in regards of how you configure BOTH alarm.com and run Crestron Home over IP.? My understanding like some here has been that you cannot have both devices communicating.? I also was understanding that communicating with alarm.com requires a unique card.
?
Appreciate your response.? Thank-you,
Re: Network Device Tree Missing Devices

 

Stupid mistake on my part, address book was set to ctp instead of auto for some reason.? Thanks to everyone who responded.


On Mon, Apr 28, 2025, 8:23?AM Dillon Costanza via <dmcostanza1992=[email protected]> wrote:
I should be able to do it through either the processor or gateway.? Connecting to the processor in NDT should show all devices currently on the network.

Even if they are not in the program there should be another folder that pops up as "out of system."

Something seems to be off with network device tree because I'm not seeing anything except the processor.? I remoted into other jobs I've programmed to verify and it works completely fine there so not sure what is going on at this place.

But yes I've tried connecting directly to the gateway as well and cannot get into it that way either.?

On Mon, Apr 28, 2025, 8:18?AM ckangis via <chris=[email protected]> wrote:
if I understand correctly what you¡¯re to do, I do this all the time. But you have to directly connect to the gateway with NDT. (It sounds like you¡¯re connecting to the processor)

Connecting directly to the gateway, it will show you all the things that are currently acquired in like groups. You can right click on individual devices or the group and get different choices of things to do.
Re: Regarding simpl windows module for Poly G62

 

You can use the standard module often and can change it. Its much easier than create it from scratch.
?
https://applicationmarket.crestron.com/search.php?search_query=polycom
Re: Sony STR-AZ7000ES: Back To IR?!?!

 

A little late to the party on IP control on Sony ZA receiver.? I would be interested in your test program.? Spent a lot of time by myself and with Crestron support but have not managed to get working with SIMPL windows.
?
Thank you!
?
Mike Copa
Re: CHV Tstats and RTS/RTHS sensors

 

Occasionally this has happened to me where I went back to site and was surprised I did not need offsets anymore. But I would say rare if I did my initial calibrations to HOBOs properly.
?
Any difference in environmental conditons (solar gain, etc)?
?
Sometimes winter/summer can be totally different offsets which can be a total pain for those really oarticualr customers.
Re: Routing issues with control protocol cp3/nvx d30

 

For posterity sake, always check firewall logs... turns out i'm an idiot and my cp3 had its router at the firewall, so it was never hopping to the switch router ip, icmp was passing because i have that globally configured internally
Re: Network Device Tree Missing Devices

 

I should be able to do it through either the processor or gateway.? Connecting to the processor in NDT should show all devices currently on the network.

Even if they are not in the program there should be another folder that pops up as "out of system."

Something seems to be off with network device tree because I'm not seeing anything except the processor.? I remoted into other jobs I've programmed to verify and it works completely fine there so not sure what is going on at this place.

But yes I've tried connecting directly to the gateway as well and cannot get into it that way either.?

On Mon, Apr 28, 2025, 8:18?AM ckangis via <chris=[email protected]> wrote:
if I understand correctly what you¡¯re to do, I do this all the time. But you have to directly connect to the gateway with NDT. (It sounds like you¡¯re connecting to the processor)

Connecting directly to the gateway, it will show you all the things that are currently acquired in like groups. You can right click on individual devices or the group and get different choices of things to do.
Re: Network Device Tree Missing Devices

 

if I understand correctly what you¡¯re to do, I do this all the time. But you have to directly connect to the gateway with NDT. (It sounds like you¡¯re connecting to the processor)

Connecting directly to the gateway, it will show you all the things that are currently acquired in like groups. You can right click on individual devices or the group and get different choices of things to do.
Re: SIMPL Module Input Signals

 

Maybe add True/False parameters to the SIMPL .umc for each of the input signals and then use those parameter settings to connect feedback only for inputs that are defined "True".
Re: Routing issues with control protocol cp3/nvx d30

 

yeah i can plugged straight through at the cp3 line, good suggestion, the switch config is pretty straight routing, i wonder if there isnt some block with cip on separate subnets in the cli?
Re: Network Device Tree Missing Devices

 

Sorry, I miss spoke. Gateway diagnostic tool is correct.
You should be able to connect directly to the qwexer.
They aren't the most stable device.
Try information tool to make sure it is on the network.
Also, you should update to the latest firmware as it is much more stable with newest firmware.


On Sun, Apr 27, 2025, 4:17 p.m. Dillon Costanza via <dmcostanza1992=[email protected]> wrote:

Thanks for the response.? I originally configured these dimmers through network device tree so unless they changed that it should still be possible.

Also not seeing the RF diagnostic tool in toolbox.? I see a gateway diagnostic tool but that doesn't allow for direct connection to gwexer.


On Sun, Apr 27, 2025, 7:09?PM MGmail via <bigfish.tyee=[email protected]> wrote:

Network device tree is cresnet.
I would suggest you use RF diagnostic tool in toolbox.
Easier and faster.
Connect directly to the gwexer.


On Sun, Apr 27, 2025, 3:47 p.m. Dillon Costanza via <dmcostanza1992=[email protected]> wrote:
Hi All,
?
Trying to configure RFID for dimmers from network device tree view.? Only device showing up is the processor, the touchpanels, gwexer, not showing up.? They show in device discovery just not in network device tree.
?
Any help is appreciated.? Thank you.
Re: Network Device Tree Missing Devices

 

Thanks for the response.? I originally configured these dimmers through network device tree so unless they changed that it should still be possible.

Also not seeing the RF diagnostic tool in toolbox.? I see a gateway diagnostic tool but that doesn't allow for direct connection to gwexer.


On Sun, Apr 27, 2025, 7:09?PM MGmail via <bigfish.tyee=[email protected]> wrote:

Network device tree is cresnet.
I would suggest you use RF diagnostic tool in toolbox.
Easier and faster.
Connect directly to the gwexer.


On Sun, Apr 27, 2025, 3:47 p.m. Dillon Costanza via <dmcostanza1992=[email protected]> wrote:
Hi All,
?
Trying to configure RFID for dimmers from network device tree view.? Only device showing up is the processor, the touchpanels, gwexer, not showing up.? They show in device discovery just not in network device tree.
?
Any help is appreciated.? Thank you.
Re: Network Device Tree Missing Devices

 

Network device tree is cresnet.
I would suggest you use RF diagnostic tool in toolbox.
Easier and faster.
Connect directly to the gwexer.


On Sun, Apr 27, 2025, 3:47 p.m. Dillon Costanza via <dmcostanza1992=[email protected]> wrote:
Hi All,
?
Trying to configure RFID for dimmers from network device tree view.? Only device showing up is the processor, the touchpanels, gwexer, not showing up.? They show in device discovery just not in network device tree.
?
Any help is appreciated.? Thank you.
Network Device Tree Missing Devices

 

Hi All,
?
Trying to configure RFID for dimmers from network device tree view.? Only device showing up is the processor, the touchpanels, gwexer, not showing up.? They show in device discovery just not in network device tree.
?
Any help is appreciated.? Thank you.
Re: Routing issues with control protocol cp3/nvx d30

 

if your PC is on.10 subnet (ideally plugged into the CP3 port ), can you connect to the NVX units and manage them? If not, maybe your switch trunk port (CP3) needs some configuration adjustment to get the control data to pass through.19 subnet?
?
61 - 80 of 256261