Thank you all for the suggestions.

?

TB loaded perfectly on their end as well.

?

So I've been using a symbolic link for my projects folder (windows command mklink /d /j). That was the cause of the issue.

VT-ProE compiles just fine with the symbolic link, and works perfectly with it even. Since my projects folder is in my OneDrive, which many of you know would add those 30 some characters to the path.

So my c: has a "projects" folder that is symbolic linked to my onedrive. Whenever I work in VT-Pro I open the vtp file using the c:\projects\...\some.vtp instead of the c:\users\...\OneDrive-..\..\projects\...\some.vtp

?

?

Construct compiles without errors using the symbolic link but I guess the compiler is referencing or resolving a path that doesn't use the symbolic link.?

?

So opening the solution file without the symbolic link resolved the issue for me.?

Forgot about TPD....yep that's good stuff too....

You need to make sure your pinout is correct, the URC cables look just like the pronto cable but they are pined differently. I've made this error in the past.

I am using Ruckus R750 Unleashed APs, like mentioned 3x, one on every floor.?

Interesting Stefan! please keep us posted!!

Also, what brand/model APs are you using?

You should be able to load it right from VTpro...That's how I do it....

The page flip mechanism is similar to the Zoom Rooms.? The Teams Room interface takes over the touchpanel, but you can touch a button to flip to the custom room controls, which can have as many pages/subpages as you want.? Just keep in mind it will time out back to the Teams interface after a minute.

can someone give me an idea of how the simpl program looks. not quite sure what line does what. idk how to start

Hi,?

not sure if that is really the case but did some more testing and I got the feeling that the TSR remotes don't like?
changing channels. Like I wrote before I had issues when changing some settings on my wifi system. After that
first it seemed again more stable but I got issues again. So I had a look at my settings in the wifi system.?

One difference to my "nearly no issue" situation was that I had the automatic channel switching on without?
channel limitations. In that "nearly no issue" situation I am pretty sure I was on fixed channels.?

So I changed my WiFi settings for all but especially for the "Crestron" SSID to a fixed channel, in my case?
11 for the 2,4 GHz Wifi. And I did something what I was believing and always reading should not be done,?
I setup the same channels on all of my 3 APs. So all use 11 for 2,4 GHz and 36-48 with 80 MHz for 5 GHz.?

Since 3 days my two TSR remotes seem pretty stable now. Before I had stable situations but there were?
situations where the TSR disconnected and reconnected many times. Maybe later got stable again.?

So this makes me feel that changing channels and/or maybe some special channels make these TSR?
remotes unstable??


Of course this needs to be checked for a longer term, but at the moment this is what it seems to me.?

What is your video source? We did this exact samer thing on? a recent job to stream an Optimum cable box to some TSWs which works fine. We would get a red video feed though due to HDCP so we threw a cheapo Amazon HDMI splitter in there to fix that.?

TB found the solution... well, more like a workaround.

I use to build my Construct projects on my D drive because my C drive is a SSD and is only for OS. The build was occuring normally and without errors but they foud out that the compiled file that I sent was not having the same size that the file they compiled themselves at TB.

?

They told me to mode the folder to my C drive and rebuild from there, that fixed the problem.

?

Still, the bug persists because I'm not going to make all my projects on my C drive, I will run out of space in a week.

?

?

Message from TB:

------------------------------------------------------------------------------------------------

I still am able to use my Tripplite/Keyspan USA-19HS USB-to-Serial adapter to the DB9-to-1/8"Mini(4-contact) connection...

Phew, what a Frankenstein!!

?

I'm still on W10, but my buddy with (6) of them at his house (and yes he has a bone-yard for parts!) has success with his W11 machine...

Neither of us uses MAC for windows...

NFH

This sounds like a problem I had back in February or March, there was a firmware issue where even though the processor was reporting IGMP was disabled it was not. This issue was fixed with newer firmware.