开云体育

Hi Charlie

Thanks Justyn, Im assuming this is something to do with whomever is providing the streaming database to crestron so possibly not a crestron issue.......... so just means it won't get fixed anytime soon.?

Ive heard though the grapevine that BBC changed something with their streaming a few weeks ago and its also effected other manufactures (autonomic).

开云体育

Hi Charlie

Hi All,?

Our jobs with NAX units appear to have lost the ability to stream any of the BBC radio channels.?
We got the "Oops there's been a problem" popup so we deleted the favourites and now the BBC channels don't even show up in the search!!

Anybody have the same or have access to an NAX to see if its the same for them!

Thanks

Enable debugging on the module, and let it tell you what the error is. These modules are very sensitive so if an electrician was doing something while the module was powered up then it's probably fried.

If you look at the installation guide, it says the 1-2 error code means
"Communications to the corresponding dimming processor have failed. Reboot the unit or contact Crestron customer service.."

So if a reboot does not take care of it, it is probably RMA time.

The most common error I have seen with this is a 2-2 error code which means a shorted FET -- probably because someone overloaded the module. ? Also RMA time when this happens.

?

One license per processor.

Would we have to pay multiple licenses then? or just a single license (per processor).

The 16 devices is per room/tile. Multiple instances of the driver can be installed, with up to 16 devices per instance.

On Mon, Jun 5, 2023 at 08:45 AM, @johnmax wrote:

Yea they used to have a Gateway Backup/Restore in Toolbox.

Gateway Backup/Restore functions are still available in Toolbox.
You need to connect to the gateway first (in Text Console, System Info, etc.), and then access it from the Functions menu. (It isn't found in the Tools menu.)
?

That seems somewhat interesting, thanks @brewernv.

They mention a limitation for 16 devices only, is that per room/tile? or in total?

Reseated all cards in DM frame

PJ RMC rcvr still not functioning

Used stand-alone POE injector – PJ RMC rcvr OK

Moved POE back to POE switch – still OK

Had to use my POE injector to get all RMC xmitters working – still worked on POE switch also
suspect Crestron POE switch not supplying enough POE power
recommended client get separate 5-port POE injector to power the RMC's

There is an available Crestron Home Extension driver that supports Shelly lighting devices and provides a UI similar to the one provided by the native CH lighting support. The driver also makes programmable operations available on the Actions & Events page that permits Shelly (and other) devices to be included in native lighting sequences/scenes. The driver depends on the use of a Hubitat automation hub, which is used as a gateway for Zigbee, Z-Wave, and Wi-Fi lighting devices. Driver documentation can be viewed at? ?.??

the client tried a POE injector at the DM, not the room box, still didn't work
i have some P/S but they all have connectors, the RMC-4K-100-C-1G has a phoenix connector
client has tried new cat5, maybe 25' run, so not long
are these boxes that finicky on POE from DM?

I wouldn't recommend this for a client but if it was my home...... Use a Lutron RA2 main repeater and create a bunch of phantom (fake) loads that correspond to your Shelly devices. Then use SIMPL to mirror the feedback of the phantom loads to the input of the Shelly devices. Add the Lutron repeater to CH and then whenever you adjust the phantom loads in CH it will do the same actions to the Shelly devices. If you want to go all out you can also use the feedback on the Shelly devices to drive the input on the RA2 devices and this way if you control the device from the Shelly app it will update its status in CH. The Shelly devices will only live in SIMPL and the Lutron devices will be in both SIMPL and CH.?

Hello guys,

I'm currently experiencing an issue with a CLX-2DIMU8 lighting module. This module was installed Thursday of last week (with no issues) and just yesterday it started flashing a 1-2 error code on the LEDs for the 5 through 8 outputs. The user manual mentions making sure power is being supplied to the unit, and we already made sure of that. Is there a way to restore functionality for these outputs?

That's a real shame.

Is there a workaround or trick or something along those lines that would facilitate the use of these devices in the Home UI? instead of navigating to each tile for each device.

Yea I tried importing one of our templates which is very graphics heavy and it completely destroyed it. Half of the objects didnt come thru or arent supported yet. We are far away from being able to import existing VT files. Unless maybe you have cookie cutter basic UI projects. No Media Player makes it a non-starter for now for any of our deployments anyway.?

Out of curiosity I imported a recent TSW-770 project.
Well, I won't be using it to modify existing projects that's for sure.
Some quick observations:
* Animation object style changed from ring to spinner
* Animation object size changed
* Rectangular gauges changed to rounded rectangle
* Rectangular Advanced buttons changed to rounded rectangular
* Imported project did not respect hidden subpages - every subpage is visible - very slow to load

Overall the software is painfully slow on my Dell XPS i7.
Choosing to close the subpage I was looking at I was prompted to save or discard changes. I selected discard and it took about 30s to decide to close the page.
After those initial observations I simply gave up and closed the application.

Hopefully it can only get better, but for now I'll leave it alone.