¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Messages
Expanded Topics Messages Polls
Date
Re: PC Control via Crestron

 

You can use ssh and powershell to accomplish all this and plenty more
Re: Latest version of Samsung EXlink protocol

 

With resi-model Samsung displays, I've had to resort to using 1-way IR.? IIRC, some use TTL-level voltage (0-5V) rather than standard RS-232 (-13V - +13V)

On Mon, Jan 16, 2017 at 9:54 PM, ferritoms@... [Crestron] <Crestron@...> wrote:
?

Just a heads up...we've been having issues as of late with this years TVs.? They will turn on and off just fine, but after a while they will not turn off via ExLink.? Pulling the power cord will reset them and they'll work again for a while.? We have resorted to converting a number of them to IR.
Re: Latest version of Samsung EXlink protocol

 

Just a heads up...we've been having issues as of late with this years TVs.? They will turn on and off just fine, but after a while they will not turn off via ExLink.? Pulling the power cord will reset them and they'll work again for a while.? We have resorted to converting a number of them to IR.
Re: PC Control via Crestron

 


On Mon, Jan 16, 2017 at 1:51 PM, rojabuma@... [Crestron] <Crestron@...> wrote:
Thank you for your recommendation. Would you be able to share the custom TCP module??
If possible, I'd appreciate the support!

I'll have to ask my SW eng...not sure if it's on an accessible system, though...

Jeff

-------------------------------------
Jeff Klein, DMC- E
Audio Visual Project Manager
Dept of Defense
Washington D.C. District

?"Clothe yourselves, all of you, with humility toward one another, for God opposes the proud but gives grace to the humble." 1 Peter 5:5
Re: MMS-2 power supply

 

It is a 12V 5A power supply. It is on the website.

On Jan 16, 2017 1:31 PM, "Phil Bridges gravityhammer@... [Crestron]" <Crestron@...> wrote:
?

I have a friend that was clearing out their closet and gave me an Autonomic MMS-2. The catch is that they didn't have a power supply. Can someone here give me the specs? Thanks!?
Re: MMS-2 power supply

 

Thanks for the helpful response!?

On Jan 16, 2017 7:08 PM, "appelz@... [Crestron]" <Crestron@...> wrote:
?

Just looked at the power supply for the one on my bench.?


GPE ( Golden Profit Electronics)
Model: GPE0720D - 120500W
Input: 100-240V 50/60 Hz 1.8A
Output: 12V 500mA 60w
Center Pin hot
Re: MMS-2 power supply

 

Just looked at the power supply for the one on my bench.?

GPE ( Golden Profit Electronics)
Model: GPE0720D - 120500W
Input: 100-240V 50/60 Hz 1.8A
Output: 12V 500mA 60w
Center Pin hot
Re: New BSS Modules (3-series)

 

I did a couple systems using them in early December. I haven't heard of any issues with either system.
Re: MMS-2 power supply

 

Great! Thank you for the help!?

On Jan 16, 2017 6:08 PM, "sound.scan@... [Crestron]" <Crestron@...> wrote:
?

I purchased this exact power supply for the MMS-2 in my office and has worked fine for a year:?

?
Re: MMS-2 power supply

 

I purchased this exact power supply for the MMS-2 in my office and has worked fine for a year:?

?
Re: MMS-2 power supply

 

I, for one, appreciate the sarcasm. I also appreciate that this document doesn't say if tip is positive or negative.?

On Jan 16, 2017 4:55 PM, "kgossen@... [Crestron]" <Crestron@...> wrote:
?

New thing out that can really help with this, it's called "Google" works well. If fact, I googled MMS-2 power supply and wouldn't yeah know, first thing was spec sheet. Wow.
Re: MMS-2 power supply

 

New thing out that can really help with this, it's called "Google" works well. If fact, I googled MMS-2 power supply and wouldn't yeah know, first thing was spec sheet. Wow.
MMS-2 power supply

 

I have a friend that was clearing out their closet and gave me an Autonomic MMS-2. The catch is that they didn't have a power supply. Can someone here give me the specs? Thanks!?
Re: Alternative to Atlona?

 

Check out the AVPro Connect MX88-AUHD. I have had a couple on my test bench, and a few out in the wild now. No complaints from techs.



?
Re: New BSS Modules (3-series)

Andrew Welker
 

We've been using them to great success, although I modified the central IP module to accept an IP address, port, and node ID's as string inputs as well as parameters. This makes it easier to use in multiple systems, as you don't have to recompile to change the IP address for the processor.


On Mon, Jan 16, 2017 at 3:21 PM nick.melin@... [Crestron] <Crestron@...> wrote:

BSS has release new integration modules based on Simpl#.



Does anyone have experience with this module suite in a production environment yet?? Any pitfalls to be aware of, other than the obvious "1.0" status?
New BSS Modules (3-series)

 

BSS has release new integration modules based on Simpl#.



Does anyone have experience with this module suite in a production environment yet? ?Any pitfalls to be aware of, other than the obvious "1.0" status?
Re: PC Control via Crestron

[email protected]
 

Hi Jeff,

Thank you for your recommendation. Would you be able to share the custom TCP module??
If possible, I'd appreciate the support!

Best,

~Robert
Re: Crestron - SmartThings Integration Code is Now on Github

 

Ignore that - missed a chunk of the required setup out :-)
Re: Crestron - SmartThings Integration Code is Now on Github

 

Jay - I assume I need to setup a port forward as the URL which is generated by the module is "
Error 500: Internal Server Error? URI /oauth/authorize" - any ideas?? Do I need to setup a port forward to the Hub or processor?

Cheers, Rick
Re: How to launch an application from within iPad GUI?

 

Actually I found an answer.

Answer 5282
37261 - 37280 of 256415