I did speak with TB on this and they seem to think that the sensor
error's are being caused by bad power coming from the transformer at
the boiler. I'm going to take a closer look next week.
--- In Crestron@..., "christian_oates" <christian@...>
wrote:
--- In Crestron@..., "jrc.audiovideo" <jamesclaflin@>
wrote:
5. Error: Message from device Slot-10.ID-08: Sensor R1T type
USE:
1,17179 Errors @ 17179 (0056:0000:0056)
TimeStamp: 08:27:48 12-14-08 UpTime: 0 days 23:42:31.76
Task:
CRHostA
Anyone know what could be causing this?.. Haven't been onsite
to
see
if the temp sensor is bad yet...
Regards,
Jim
Hi Jim,
Did you ever figure out what this was? I'm getting an almost
identical
error from three out of six sensors (6 TSTATs on the system, one
sensor for each TSTAT). Except for the error (which we think is
contributing to the system restarting) the TSTATS are running
fine.
For everybody else: Each sensor is using a single pair of CAT5,
and
each has it's own CAT5 run (so hopefully no interference). I'm
pretty
sure we're under the 500 feet limit...
Christian Oates
e-home, inc.
