Here's a basic command, I tend to use the V command more than
anything.
**V4,5,5,5,5,5,0,0!!
This will switch input 5 on levels 1,2,3,4,5 (RGBHV) to output 4,
while not changing the current source routed to output 4 on levels 6
and 7.
you can send multiple commands at one time, just use a space at the
end of the first one, and encapsulate all the commands in the ** !!.
**V4,5,5,5,5,5,0,0 V1,0,0,0,0,0,5,5!!
Which would switch input 5 to output 4 video and input 5 to output 1
audio.
<oystein.loland@...> wrote:
Can anyone point me to (or send me) a simple program were
controlling a
Sierra router is involved?
I have a SierraPro XL1204 that doesn't react on the commands I try
to
send it. I have probably missed something but were?
The protocol is on "host protocol" on the router and the bits and
flow
control is set the same on both the com and the Sierra.
I'm using the Sierra Router macro included with Crestron Simpl
Windows.
Any help out there?
Thanks
OL
