You have two sources of control, the S-Play Mini via DMX, and Crestron via sACN, both trying to control all 512 channels of the Ethergate's?DMX out.? Is that correct?? You should be able to set the Ethergate's merge mode to LTP (Latest Takes Precedence).? That should allow the S-Play's values to not be overwritten by sACN channels that are not changing from packet to packet.? Or you can set up scenes in the S-Play that are triggered from Crestron and let it be the DMX master.
On Mon, Apr 14, 2025 at 1:52?PM Thorsten K?hler via <thorsten.koehler=
[email protected]> wrote:
Hi,
?
I?m using the ?SACN SenderDirectSockets” module from the SIMPL device database to control an Enttec Ethergate Artnet/SACN to DMX gateway.
In general, it works. However, it seems as if the module sends out all 512 channels, even if I change only one of them.
This is very unfortunate, as I?m using an Enttec S-Play mini to send out prerecorded scenes to my fixtures via the Ethergate in parallel to the Crestron processor.
?
Is there any alternative to SACN module (Artnet would be OK as well) available that sends out only the values for the DMX channel that has actually changed?
?
Thanks,
Thorsten
