I have a friend that purchased a house with an older Crestron System that wants to do a refresh.
Currently has the following
1. Cp2e?
2. CNX-BiPad8
3. TPS-4L (x3)
4. CNX-PVID8x3
5. Integra surround receiver
6. CEN-TRACK
?
Looking to simplify system by replacing all displays with SmarTV's that will be used with TV remote and as standalone. For house audio to add his existing Sonos to the CNX-BiPad8 along with the existing CEN-TRACK to allow for whole house music.
Remove the CNX-PVID8x3 and to replace the CP2e with either a CP4 or RMC4 paired with a CEN-IO-COM-102 for additional serial ports. Updating the programming in each TPS-4L even though they aren't SmartGraphic compatible this will keep cost down. Finally, add a Samsung Tablet or iPad
to theater for control and possibly add house music control to his iPhone to allow room source selection and control (as long as the Sonos interface to Crestron works well).
?
1. Any issue with using an older Sonos integration with Crestron?
2. Thoughts of using Android vs IOS for control? I didn't see Android in Simpl, unless Crestron GO is for either.
?
