¿ªÔÆÌåÓýHi Chris, ? OK, now i understand the setup. Well, I guess that?s the reason why we prefer to connect everything directly. Any chance to at least connect the sources directly to the Trinnov and then just distribute the video via the 4KZ? ? With regards to madVR vs. Lumagen: I?m just a madVR guy. I?ve started more than ten years ago with the madVR PC software and then we jumped immediately onto the Envy as soon it became available in early 2020. The developer is living in the same city as I do, so there?s a close relationship. I had a Lumagen for a couple of weeks but never got a handle onto it. It?s just all too cryptic and old-school. Of course there are technical pros and cons to each of the two devices, but we just stick to the Envy as it doesn?t make sense for us to be experts in both. ? Cheers, Thorsten ? Von: [email protected] <[email protected]> Im Auftrag von ckangis ? [Edited Message Follows] Thank you Thorsten! This is a real education for me on this particular subject (HDR, etc.).? As early on in the hi-res (4K) business, nothing was reliable so I down-res'd things for client sanity and sort of checked out. Your comments make me want to get brushed up and going again! ? As to our setup (Though we're going to reconfigure things), we have a Kscape Strato and dedicated Apple TV, both set for 4K operation. The rest of the rooms are basically 2K distribution. The Sources input into DM16x16/4KZ input cards. The dual 4KZ output card feeds separate RMC-4KZ units: one for the 715 projector, and the other for the TNV which is located in the Theater rack. We route the chosen source to both outputs. Sources have the same EDID. We have plans to move the TNV into the main rack and route the sources directly into it, and feed the projector from it. ? We were able to construct an appropriate EDID by temporarily feeding the projector from the TNV and capturing the settings that way (BS that we cannot merge A and V settings into one file...) ? Also, Tell me your thoughts on why you like the Envy over the Lumagen? I have fond memories of the Lumagen, though I haven't dealt with them for almost a decade now... TIA!!? |
