Le?mar. 14 mai 2024 ¨¤ 15:03, Jim via <jpe_2012=[email protected]> a ¨¦crit?:
I got that AJA switcher module from the link, and so before I go on, I thank you.
You're welcome
The Help file was kind of small and I'm kind of green, so I have a couple of Q's on it:
No need to make a big help as the module is really simple to use
"Enter IP Address in parameter IPAddr$ send analog values to analog_input output. ? ? ie : send 32 to Output[14] : switch input 32 to output 14"
1. I understand inputting the I.P. address part, but I see no way to send to the TCP/IP module (Tx$, Rx$). Does this mean that I no longer need my TCP/IP Client module?
Yes, no need to use a tcp client
2. I added the other 14 Output parameter fields to match my Kumo 1616 ("Alt+"), but which is the command to put into the line input? ? ? ? ? "send 32 to Output[14]" OR "switch input 32 to output 14"?? ? ? I'm thinking it's the first one, but since I'm trying to get this as close as possible before I get the actual gear and go onsite, I'm checking now. ? ? ??? ? ? ? ?That is: If I want to send Input 1 to Output 2, what EXACTLY am I typing into that field of Output 2?
On the signal feed in output[2] send the value 1 and it will switch the input 1 to output 2
You will see the button on the kumo following the switch as well
Sorry to be so dense, but like I said, I'm still pretty green and I don't have the item here at the office for trial and error testing.
I would be so appreciate any help you have time for. Jim
